Multi-scale plasticity modeling: Coupled discrete dislocation and continuum crystal plasticity

A hierarchical multi-scale model that couples a region of material described by discrete dislocation plasticity to a surrounding region described by conventional crystal plasticity is presented. The coupled model is aimed at capturing non-classical plasticity effects such as the long-range stresses associated with a density of geometrically necessary dislocations and source limited plasticity, while also accounting for plastic flow and the associated energy dissipation at much larger scales where such non-classical effects are absent. The key to the model is the treatment of the interface between the discrete and continuum regions, where continuity of tractions and displacements is maintained in an average sense and the flow of net Burgers vector is managed via "passing" of discrete dislocations. The formulation is used to analyze two plane strain problems: (i) tension of a block and (ii) crack growth under mode I loading with various sizes of the discrete dislocation plasticity region surrounding the crack tip. The computed crack growth resistance curves are nearly independent of the size of the discrete dislocation plasticity region for region sizes ranging from 30 mu m x 30 mu m to 10 mu m x 5 mu m. The multi-scale model can reduce the computational time for the mode 1 crack analysis by a factor of 14 with little or no loss of fidelity in the crack growth predictions. (c) 2008 Elsevier Ltd. All rights reserved.

[1]  A. Needleman,et al.  Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis , 2006 .

[2]  van der Erik Giessen,et al.  Discrete dislocation plasticity: a simple planar model , 1995 .

[3]  Y. Bréchet,et al.  The stored energy of cold work: Predictions from discrete dislocation plasticity , 2005 .

[4]  Xiaopeng Xu,et al.  Void nucleation by inclusion debonding in a crystal matrix , 1993 .

[5]  R. LeSar,et al.  Multipole expansion of dislocation interactions: Application to discrete dislocations , 2002 .

[6]  Vikram Deshpande,et al.  Scaling of discrete dislocation predictions for near-threshold fatigue crack growth , 2003 .

[7]  Kaushik Bhattacharya,et al.  Non-periodic finite-element formulation of orbital-free density functional theory , 2006 .

[8]  A. Voter,et al.  Extending the Time Scale in Atomistic Simulation of Materials Annual Re-views in Materials Research , 2002 .

[9]  Joost J. Vlassak,et al.  Plastic deformation of freestanding thin films: Experiments and modeling , 2006 .

[10]  William A. Curtin,et al.  Multiscale plasticity modeling: coupled atomistics and discrete dislocation mechanics , 2004 .

[11]  R. Asaro,et al.  Finite element analysis of crystalline solids , 1985 .

[12]  I. Romero,et al.  Computational issues in the simulation of two-dimensional discrete dislocation mechanics , 2007 .

[13]  L. Freund.  The Mechanics of Dislocations in Strained-Layer Semiconductor Materials , 1993 .

[14]  T. Hughes.  Generalization of selective integration procedures to anisotropic and nonlinear media , 1980 .

[15]  Peter Gumbsch,et al.  Study of dislocation reactions and rearrangements under different loading conditions , 2005 .

[16]  K. Lim,et al.  Effect of residual stress on fracture in confined thin films: a discrete dislocation study , 2006 .

[17]  Alan Needleman,et al.  Material rate dependence and localized deformation in crystalline solids , 1983 .

[18]  J. Rice.  TENSILE CRACK TIP FIELDS IN ELASTIC-IDEALLY PLASTIC CRYSTALS , 1987 .

[19]  M. Ortiz,et al.  An analysis of the quasicontinuum method , 2001, cond-mat/0103455.

[20]  C. Woodward.  First-principles simulations of dislocation cores , 2005 .

[21]  A. Needleman,et al.  A discrete dislocation analysis of mode I crack growth , 2000 .

[22]  M. Ortiz,et al.  Quasicontinuum analysis of defects in solids , 1996 .