A TEG Efficiency Booster with Buck–Boost Conversion

A thermoelectric generator (TEG) efficiency booster with buck–boost conversion and power management is proposed as a TEG battery power conditioner suitable for a wide TEG output voltage range. An inverse-coupled inductor is employed in the buck–boost converter, which is used to achieve smooth current with low ripple on both the TEG and battery sides. Furthermore, benefiting from the magnetic flux counteraction of the two windings on the coupled inductor, the core size and power losses of the filter inductor are reduced, which can achieve both high efficiency and high power density. A power management strategy is proposed for this power conditioning system, which involves maximum power point tracking (MPPT), battery voltage control, and battery current control. A control method is employed to ensure smooth switching among different working modes. A modified MPPT control algorithm with improved dynamic and steady-state characteristics is presented and applied to the TEG battery power conditioning system to maximize energy harvesting. A 500-W prototype has been built, and experimental tests carried out on it. The power efficiency of the prototype at full load is higher than 96%, and peak efficiency of 99% is attained.

[1]  Rae-Young Kim,et al.  Analysis and Design of Maximum Power Point Tracking Scheme for Thermoelectric Battery Energy Storage System , 2009, IEEE Transactions on Industrial Electronics.

[2]  S. Tanemura,et al.  Feasibility Study on the Use of a Solar Thermoelectric Cogenerator Comprising a Thermoelectric Module and Evacuated Tubular Collector with Parabolic Trough Concentrator , 2012, Journal of Electronic Materials.

[3]  Lasse Rosendahl,et al.  Hybrid Solid Oxide Fuel Cell and Thermoelectric Generator for Maximum Power Output in Micro-CHP Systems , 2011 .

[4]  Ali Shakouri,et al.  Scalable Cost/Performance Analysis for Thermoelectric Waste Heat Recovery Systems , 2012, Journal of Electronic Materials.

[5]  C. Q. Su,et al.  Thermal Optimization of the Heat Exchanger in the Vehicular Waste-Heat Thermoelectric Generations , 2012, Journal of Electronic Materials.

[6]  J. W. Park,et al.  Maximum Power Point Tracking Controller for Thermoelectric Generators with Peak Gain Control of Boost DC–DC Converters , 2012, Journal of Electronic Materials.

[7]  Nyambayar Baatar,et al.  A Digital Coreless Maximum Power Point Tracking Circuit for Thermoelectric Generators , 2011 .

[8]  Ali Emadi,et al.  Digital Combination of Buck and Boost Converters to Control a Positive Buck–Boost Converter and Improve the Output Transients , 2009 .

[9]  Y. D. Deng,et al.  A 42-V Electrical and Hybrid Driving System Based on a Vehicular Waste-Heat Thermoelectric Generator , 2012, Journal of Electronic Materials.

[10]  Hiroshi Maiwa,et al.  Development of 100-W High-Efficiency MPPT Power Conditioner and Evaluation of TEG System with Battery Load , 2011 .

[11]  Xiaodong Zhang,et al.  Overview of Thermoelectric Generation for Hybrid Vehicles , 2008 .

[12]  Lasse Rosendahl,et al.  Experimental Study of a Thermoelectric Generation System , 2011 .

[13]  Li Zhang,et al.  A Thermoelectric Generation System and Its Power Electronics Stage , 2012, Journal of Electronic Materials.

[14]  S. Ben-Yaakov,et al.  Modeling and Analysis of Thermoelectric Modules , 2005, IEEE Transactions on Industry Applications.