Measurement accuracy of semiconductor LDA systems

A laser Doppler anemometer with a laser diode as the light source, has several advantages: i.e., low power consumption, compactness, and low cost. In order to be fully benefitted by these favorable characteristics, the measurement uncertainty, associated with wavefront distortion in the measuring volume, should be minimized. Furthermore, proper attention should be given to system misalignment caused by external perturbations, such as thermal expansion of the diode-collimator assembly. These considerations lead to a computational procedure for optimizing the layout of the semiconductor LDA system. Calculations are based on a generalized relation for fringe non-uniformity combined with a simulation model for the anemometry system. For this purpose, the optical field of a laser diode is described satisfactorily as a product of a Gaussian and a truncated Lorentzian distribution. The influence of various design parameters is examined by means of an extensive computational study as well as experimental evaluation involving precise scanning of the measuring volume. The performance is improved by employing a small focal length collimator and a large focal length front lens. For measurement of turbulence intensities smaller than 1%, it may become necessary to collect the signals in the side scatter and to use a frequency-domain signal processor. For such an application, temperature control may also be necessary, but it should be applied to the entire diode-collimator assembly and not just to the laser diode as suggested in previous publications.