Optimisation and measurement of eddy current damping in a passive tuned mass damper
暂无分享,去创建一个
[1] S. Mezani,et al. A New Topology for Induction Heating System With PM Excitation: Electromagnetic Model and Experimental Validations , 2015, IEEE Transactions on Magnetics.
[2] G. Akoun,et al. 3D analytical calculation of the forces exerted between two cuboidal magnets , 1984 .
[3] F. Mainardi,et al. Creep, relaxation and viscosity properties for basic fractional models in rheology , 2011, 1110.3400.
[4] T. Theodoulidis,et al. Analytical model for tilted coils in eddy-current nondestructive inspection , 2005, IEEE Transactions on Magnetics.
[5] G. Vossoughi,et al. An Analytical 3-D Model for Calculating Eddy-Current Damping Force for a Magnetic Levitation System With Permanent Magnet , 2012, IEEE Transactions on Magnetics.
[6] Jian-Bin Zhou,et al. Evaluation of Eddy-Current Effects on Diamagnetic Bearings for Microsystems , 2009, IEEE Transactions on Industrial Electronics.
[7] B. V. Jayawant,et al. Permanent-magnet linear eddy-current brake with a non-magnetic reaction plate , 1999 .
[8] Michael J. Brennan,et al. Decentralized control for multichannel active vibration isolation , 2001, IEEE Trans. Control. Syst. Technol..
[9] Stavros M. Panas,et al. Eddy currents in an infinite slab due to an elliptic current excitation , 1991 .
[10] E. A. Lomonova,et al. Modeling of Relative Permeability of Permanent Magnet Material Using Magnetic Surface Charges , 2013, IEEE Transactions on Magnetics.
[11] R. S. Jangid,et al. Optimum parameters of multiple tuned mass dampers for base-excited damped systems , 1997 .
[12] Budhaditya Hazra,et al. Output-only de-tuning assessment of tuned mass dampers , 2013 .
[13] Elena A. Lomonova,et al. Modeling and Measurements on a Finite Rectangular Conducting Plate in an Eddy Current Damper , 2014, IEEE Transactions on Industrial Electronics.