Comparison between grooved and plane aerostatic thrust bearings: static performance

The demand of air bearings is increasing for those applications that require precision linear movements or high-speed rotations. In particular in this paper air pads for air motion technology are studied. The paper analyses the effect of a circumferential groove machined on the pad surface on pressure distribution, air flow consumption and stiffness. Two geometries are investigated and compared: one with three supply orifices and the other with a circumferential groove as well. The static characteristics of the pads are experimentally determined with also the pressure distributions under the pads along the radial and circumferential directions. The experimental pressure distributions are compared with the simulated ones, obtained with a numerical program at the purpose developed. The numerical model considers a general formulation of the supply holes discharge coefficient that can be used also in presence of a circumferential groove.

[1]  Frank J. Fronczak,et al.  A Design Methodology for Obtaining Infinite Stiffness in an Aerostatic Thrust Bearing , 1986 .

[2]  H. Mori,et al.  Theoretical Flow-Models for Externally Pressurized Gas Bearings , 1969 .

[3]  Terenziano Raparelli,et al.  Discharge coefficients of orifice-type restrictor for aerostatic bearings , 2007 .

[4]  Jean-Sébastien Plante,et al.  A design model for circular porous air bearings using the 1D generalized flow method , 2005 .

[5]  P. L. Holster,et al.  Theoretical analysis and experimental verification on the static properties of externally pressurized air-bearing pads with load compensation , 1987 .

[6]  Ming-Fei Chen,et al.  Design of the aerostatic linear guideway with a passive disk-spring compensator for PCB drilling machine , 2010 .

[7]  Jyh-Chyang Renn,et al.  Experimental and CFD study on the mass flow-rate characteristic of gas through orifice-type restrictor in aerostatic bearings , 2004 .

[8]  K. J. Stout,et al.  Theoretical analysis of two configurations of aerostatic flat pad bearings using pocketed orifice restrictors , 1993 .

[9]  Farid Al-Bender,et al.  Symmetric Radial Laminar Channel Flow With Particular Reference to Aerostatic Bearings , 1992 .

[10]  W. A. Gross,et al.  Gas film lubrication , 1963 .

[11]  Zbyszko Kazimierski,et al.  Investigations of Externally Pressurized Gas Bearings With Different Feeding Systems , 1980 .

[12]  K. J. Stout,et al.  The design of high efficiency flat pad aerostatic bearings using laminar restrictions , 1989 .

[13]  Marc Bonis,et al.  Prediction of the stability of air thrust bearings by numerical, analytical and experimental methods , 1996 .

[14]  Shigeka Yoshimoto,et al.  Static and Dynamic Characteristics of Aerostatic Circular Porous Thrust Bearings (Effect of the Shape of the Air Supply Area) , 2001 .

[15]  Sadek Z. Kassab,et al.  Effects of operating conditions and supply hole diameter on the performance of a rectangular aerostatic bearing , 1997 .

[16]  Hiromu Hashimoto,et al.  Optimization of Groove Geometry for a Thrust Air Bearing According to Various Objective Functions , 2008 .

[17]  Terenziano Raparelli,et al.  Numerical analysis on the supply hole discharge coefficient in aerostatic bearings , 2006 .

[18]  Farid Al-Bender,et al.  Tilt characteristics of circular centrally fed aerostatic bearings , 1992 .

[19]  Han Ding,et al.  Influences of the geometrical parameters of aerostatic thrust bearing with pocketed orifice -type restrictor on its performance , 2007 .

[20]  T. Nakamura.  Static Tilt Characteristics of Aerostatic Rectangular Double Compound Restrictors , 1996 .

[21]  J. W. Lund.  The Hydrostatic Gas Journal Bearing With Journal Rotation and Vibration , 1964 .

[22]  Ming-Fei Chen,et al.  Static behavior and dynamic stability analysis of grooved rectangular aerostatic thrust bearings by modified resistance network method , 2002 .

[23]  Ming-Fei Chen,et al.  Research on the arc type aerostatic bearing for a PCB drilling station , 2002 .

[24]  M. T. Neves,et al.  Discharge coefficient influence on the performance of aerostatic journal bearings , 2010 .