On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction

[1]  N. Schell,et al.  Austenite carbon enrichment and decomposition during Quenching and Tempering of high silicon high carbon bearing steel , 2023, Acta Materialia.

[2]  N. Chen,et al.  Revealing carbide precipitation effects and their mechanisms during quenching-partitioning-tempering of a high carbon steel: Experiments and Modeling , 2021 .

[3]  G. G. Ribamar,et al.  Thermodynamic Stacking Fault Energy, Chemical Composition, and Microstructure Relationship in High-Manganese Steels , 2020, Metallurgical and Materials Transactions A.

[4]  D. McDowell,et al.  Lattice strains and diffraction elastic constants of cubic polycrystals , 2020, Journal of the Mechanics and Physics of Solids.

[5]  A. P. Tschiptschin,et al.  Phase transformation mechanisms during Quenching and Partitioning of a ductile cast iron , 2019, Acta Materialia.

[6]  J. Sietsma,et al.  The influence of the austenite grain size on the microstructural development during quenching and partitioning processing of a low-carbon steel , 2019, Materials & Design.

[7]  Wei Li,et al.  The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels , 2019, Wear.

[8]  S. Allain,et al.  Internal stresses and carbon enrichment in austenite of Quenching and Partitioning steels from high energy X-ray diffraction experiments , 2018 .

[9]  Leonardo Wu,et al.  Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry , 2017 .

[10]  K. Findley,et al.  Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering , 2017 .

[11]  S. Allain,et al.  In-situ investigation of quenching and partitioning by High Energy X-Ray Diffraction experiments , 2017 .

[12]  R. Misra,et al.  The significance of multi-step partitioning: Processing-structure-property relationship in governing high strength-high ductility combination in medium-manganese steels , 2017 .

[13]  Xianghua Liu,et al.  Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q&P) processes after a full and intercritical austenitization , 2017 .

[14]  J. Sietsma,et al.  Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel , 2016 .

[15]  D. Raabe,et al.  Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation , 2015 .

[16]  K. Findley,et al.  The influence of silicon and aluminum alloying on the lattice parameter and stacking fault energy of austenitic steel , 2014 .

[17]  T. Sourmail,et al.  The influence of silicon in tempered martensite: Understanding the microstructure-properties relationship in 0.5-0.6 wt.% C steels , 2014 .

[18]  R. Xiong,et al.  Thermodynamic calculation of stacking fault energy of the Fe–Mn–Si–C high manganese steels , 2014 .

[19]  H. Matsuda,et al.  Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomograp , 2014 .

[20]  S. V. Bohemen,et al.  The nonlinear lattice expansion of iron alloys in the range 100-1600K , 2013 .

[21]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[22]  V. Kuokkala,et al.  Thermodynamic modeling of the stacking fault energy of austenitic steels , 2011 .

[23]  U. Prahl,et al.  Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels , 2009 .

[24]  S. H. Kim,et al.  Characterization of the Carbon and Retained Austenite Distributions in Martensitic Medium Carbon, High Silicon Steel , 2007 .

[25]  O. Bouaziz,et al.  A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel , 2004 .

[26]  Olivier Bouaziz,et al.  Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys , 2004 .

[27]  H. Bhadeshia,et al.  Very strong bainite , 2004 .

[28]  D. Matlock,et al.  Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation , 2004 .

[29]  Francisca García Caballero,et al.  Very strong low temperature bainite , 2002 .

[30]  Mark R. Daymond,et al.  Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra , 1997 .

[31]  H. Bhadeshia,et al.  Austenite films in bainitic microstructures , 1995 .

[32]  C. Celada-Casero,et al.  Delft University of Technology Microstructure evolution during high-temperature partitioning of a Medium-Mn Quenching and Partitioning steel , 2019 .

[33]  J. Sietsma,et al.  Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process , 2018 .

[34]  Y. Estrin,et al.  Twinning-induced plasticity (TWIP) steels , 2018 .

[35]  F. Niessen,et al.  In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel , 2017, Metallurgical and Materials Transactions A.

[36]  A. P. Hammersley,et al.  Two-dimensional detector software: From real detector to idealised image or two-theta scan , 1996 .

[37]  L. Azároff.  X-Ray diffraction , 1974 .