Polymeric composites for powder-based additive manufacturing: Materials and applications
暂无分享,去创建一个
Chee Kai Chua | Kun Zhou | Fei Shen | Shangqin Yuan | K. Zhou | C. Chua | Shangqin Yuan | Fei Shen
[1] M. S. Wahab,et al. Development of Polymer Nanocomposites for Rapid Prototyping Process , 2009 .
[2] L. Froyen,et al. Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .
[3] D. Silva,et al. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy. , 2009, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[4] Zuowan Zhou,et al. Largely Enhanced Thermal Conductivity and High Dielectric Constant of Poly(vinylidene fluoride)/Boron Nitride Composites Achieved by Adding a Few Carbon Nanotubes , 2016 .
[5] A. Kawabata,et al. Growth of Dense, Vertical and Horizontal Graphene and Its Thermal Properties , 2013 .
[6] M. Schmid,et al. Thermal and molecular properties of polymer powders for Selective Laser Sintering (SLS) , 2016 .
[7] L. Cardon,et al. Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering , 2016, Polymers.
[8] Chee Kai Chua,et al. Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering. , 2010, Acta biomaterialia.
[9] Shi-qiang Lu,et al. Synthesis and characterization of poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(arylene ether ketone) (S-PAEK) block copolymers , 2001 .
[11] P. A. Staniland,et al. Advanced thermoplastics and their composites , 1987, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.
[12] C K Chua,et al. Selective laser sintering of biocompatible polymers for applications in tissue engineering. , 2005, Bio-medical materials and engineering.
[13] Jean-Pierre Kruth,et al. Densification and Geometrical Assessments of Alumina Parts Produced Through Indirect Selective Laser Sintering of Alumina-Polystyrene Composite Powder , 2013 .
[14] M. Mehrali,et al. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing , 2015, Science and technology of advanced materials.
[15] Thomas L. Bougher,et al. High thermal conductivity of chain-oriented amorphous polythiophene. , 2014, Nature nanotechnology.
[16] Wing Kam Liu,et al. Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing , 2018 .
[17] Wei Zhu,et al. 3D‐Printed Artificial Microfish , 2015, Advanced materials.
[18] Paulo Jorge Da Silva bartolo,et al. Advanced Processes to Fabricate Scaffolds for Tissue Engineering , 2008 .
[19] D. Lin,et al. A review on additive manufacturing of polymer-fiber composites , 2017 .
[20] N. Theodoropoulou,et al. Electrical and mechanical properties of PA11 blended with nanographene platelets using industrial twin-screw extruder for selective laser sintering , 2013 .
[21] K. Hon,et al. Selective Laser Sintering of SiC/Polyamide Composites , 2003 .
[22] L. Cardon,et al. Polystyrene‐coated alumina powder via dispersion polymerization for indirect selective laser sintering applications , 2012 .
[23] Mohammed H Al-Saleh. Electrical and electromagnetic interference shielding characteristics of GNP/UHMWPE composites , 2016 .
[24] C. Yan,et al. A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites , 2016, Scientific Reports.
[25] K. Zhou,et al. Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering , 2018 .
[26] V. E. Beal,et al. Process optimization for PA12/MWCNT nanocomposite manufacturing by selective laser sintering , 2013 .
[27] L. Hao,et al. In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering. , 2009, Journal of biomedical materials research. Part A.
[28] Shaun Eshraghi,et al. Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. , 2010, Acta biomaterialia.
[29] F. Doğan,et al. Mechanical properties of polypropylene (PP) + high‐density polyethylene (HDPE) binary blends: Non‐isothermal degradation kinetics of PP + HDPE (80/20) Blends , 2013 .
[30] A. Morgan,et al. Flame Retardant Intumescent Polyamide 11-Carbon Nanofiber Nanocomposites: Thermal and Flammability Properties , 2007 .
[31] J. Kruth,et al. Characterization of polyamide powders for determination of laser sintering processability , 2016 .
[32] Steve Edmondson,et al. Design and additive manufacture for flow chemistry. , 2013, Lab on a chip.
[33] P. Calvert. Inkjet Printing for Materials and Devices , 2001 .
[34] K E Tanner,et al. Selective Laser Sintering of Hydroxyapatite Reinforced Polyethylene Composites for Bioactive Implants and Tissue Scaffold Development , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[35] Goonhee Lee. Selective laser sintering of calcium phosphate materials for orthopedic implants , 1997 .
[36] Oana Ghita,et al. Studies on the reprocessability of poly(ether ether ketone) (PEEK) , 2014 .
[37] Feng Li,et al. Weyl points and Fermi arcs in a chiral phononic crystal , 2017, Nature Physics.
[38] Rodney S. Ruoff,et al. Polymer−Graphite Nanocomposites: Effective Dispersion and Major Property Enhancement via Solid-State Shear Pulverization , 2008 .
[39] Jonathan Goole,et al. 3D printing in pharmaceutics: A new tool for designing customized drug delivery systems. , 2016, International journal of pharmaceutics.
[40] Robert J. Wood,et al. An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.
[41] Oana Ghita,et al. Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders , 2014 .
[42] Richard S. Trask,et al. 3D printed polyurethane honeycombs for repeated tailored energy absorption , 2016 .
[43] Miguel Castilho,et al. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects , 2014, Biofabrication.
[44] C. Tang,et al. MODELING OF THE MECHANICAL BEHAVIOR OF HA/PEEK BIOCOMPOSITE UNDER QUASI-STATIC TENSILE LOAD , 2004 .
[45] Chee Kai Chua,et al. Thermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering , 2015, Molecules.
[46] R. Mülhaupt,et al. Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.
[47] Wenjing Cao,et al. Mechanical properties and morphologies of poly(ether ketone ketone)/glass fibers/mica ternary composites , 2001 .
[48] Chee Kai Chua,et al. Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication , 2017 .
[49] N. Murthy,et al. Hydrogen bonding, mobility, and structural transitions in aliphatic polyamides , 2006 .
[50] C. Schick,et al. Differential scanning calorimetry (DSC) of semicrystalline polymers , 2009, Analytical and bioanalytical chemistry.
[51] C. Ramesh. Crystalline Transitions in Nylon 12 , 1999 .
[52] Noor Azuan Abu Osman,et al. Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering , 2014, PloS one.
[53] Shuping Peng,et al. Mechanical properties' improvement of a tricalcium phosphate scaffold with poly-l-lactic acid in selective laser sintering , 2013, Biofabrication.
[54] P. Wei,et al. Synergistic effects of sepiolite on intumescent flame retardant polypropylene , 2010 .
[55] David L. Bourell,et al. Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process , 2011 .
[56] Patrice Peyre,et al. Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers , 2015 .
[57] Alida Mazzoli,et al. Characterization of an aluminum-filled polyamide powder for applications in selective laser sintering , 2007 .
[58] A Thor,et al. A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps. , 2009, International journal of oral and maxillofacial surgery.
[59] John M. Torkelson,et al. Sub-micron dispersed-phase particle size in polymer blends: overcoming the Taylor limit via solid-state shear pulverization , 2003 .
[60] Y. Wang,et al. Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sintering , 2016, Journal of Materials Science.
[61] Dichen Li,et al. Hierarchically porous materials prepared by selective laser sintering , 2017 .
[62] M. Bhandari,et al. The Use of Carbon-Fiber-Reinforced (CFR) PEEK Material in Orthopedic Implants: A Systematic Review , 2015, Clinical medicine insights. Arthritis and musculoskeletal disorders.
[63] R. Adhikari,et al. Biodegradable synthetic polymers for tissue engineering. , 2003, European cells & materials.
[64] Pierre Le-Clech,et al. Fouling in membrane bioreactors used in wastewater treatment , 2006 .
[65] Fernando Cruz. Fabrication of HA/PLLA Composite Scaffolds for Bone Tissue Engineering Using Additive Manufacturing Technologies , 2010 .
[66] Min Wang,et al. Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres , 2008, Journal of materials science. Materials in medicine.
[67] Chee Kai Chua,et al. Fabrication of customised scaffolds using computer‐aided design and rapid prototyping techniques , 2005 .
[68] K. Evans,et al. Processability of PEEK, a New Polymer for High Temperature Laser Sintering (HT-LS) , 2015 .
[69] S. Das,et al. Processing and properties of electrically conductive nanocomposites based on polyamide-12 filled with exfoliated graphite nanoplatelets prepared by selective laser sintering , 2013 .
[70] E. Toyserkani,et al. Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes , 2017 .
[71] Neil Hopkinson,et al. Methods for quantifying the stable sintering region in laser sintered polyamide-12 , 2013 .
[72] E. Champion. Sintering of calcium phosphate bioceramics. , 2013, Acta biomaterialia.
[73] G. P. Johari,et al. The effect of increased crystallization on the electrical properties of nylon-12 , 1993 .
[74] Chwee Teck Lim,et al. Nanofiber technology: current status and emerging developments , 2017 .
[75] W. Peukert,et al. Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing , 2016 .
[76] Frank C Sciurba,et al. Activity Monitoring and Energy Expenditure in COPD Patients: A Validation Study , 2007, COPD.
[77] T. Moon,et al. Flame-retardant polyamide 11 nanocomposites: further thermal and flammability studies , 2011 .
[78] S. Huang,et al. Selective laser sintering of polyamide-rectorite composite , 2005 .
[79] Zhengping Liu,et al. Ionic liquids as green reaction media for synthesis of poly(aryl ether ketone)s , 2013 .
[80] W. Wang,et al. Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites , 2012 .
[81] Chee Kai Chua,et al. Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering , 2016, Polymers.
[82] Ying‐Ling Liu,et al. Electrical conductivity enhancement of polymer/multiwalled carbon nanotube (MWCNT) composites by thermally-induced defunctionalization of MWCNTs. , 2011, ACS applied materials & interfaces.
[83] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.
[84] J. Beaman,et al. SLS materials development method for rapid manufacturing , 2005 .
[85] K. Zhou,et al. Development of process efficiency maps for selective laser sintering of polymeric composite powders: Modeling and experimental testing , 2018 .
[86] Wy Ip,et al. Selective Laser Sintering of Poly(L-Lactide)/Carbonated Hydroxyapatite Nanocomposite Porous Scaffolds for Bone Tissue Engineering , 2010 .
[87] Suman Das,et al. Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering , 2010 .
[88] I. Gibson,et al. Material properties and fabrication parameters in selective laser sintering process , 1997 .
[89] Oana Ghita,et al. Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties , 2016 .
[90] Hassan A. Arafat,et al. Economic evaluation of stand-alone solar powered membrane distillation systems , 2012 .
[91] Jean-Pierre Kruth,et al. Effect of Powder Size and Shape on the SLS Processability and Mechanical Properties of a TPU Elastomer , 2016 .
[92] S. Huang,et al. Experimental Investigation into the Selective Laser Sintering of High-Impact Polystyrene , 2008 .
[93] C. Yan,et al. Investigation and development of large-scale equipment and high performance materials for powder bed laser fusion additive manufacturing , 2014 .
[94] Haseung Chung,et al. Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering , 2008 .
[95] B. Liu,et al. Post Treatment Process and Selective Laser Sintering Mechanism of Polymer-Coated Mo Powder , 2011 .
[96] J. Torkelson,et al. Processing-Structure-Property Relationships in Solid-State Shear Pulverization: Parametric Study of specific energy , 2012 .
[97] Arjun G. Yodh,et al. Thermal conductivity and interfacial resistance in single-wall carbon nanotube epoxy composites , 2005 .
[98] P H Krebsbach,et al. Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. , 2003, Biomaterials.
[99] Brett Lyons,et al. Additive Manufacturing in Aerospace; Examples and Research Outlook , 2014 .
[100] E. C. Botelho,et al. Evaluation of crystallization kinetics of poly (ether-ketone-ketone) and poly (ether-ether-ketone) by DSC , 2010 .
[101] S. Mohanty,et al. Effect of surface modification of fly ash reinforced in polyetheretherketone composites , 2011 .
[102] Howon Lee,et al. Ultralight, ultrastiff mechanical metamaterials , 2014, Science.
[103] Wenjun Zhang,et al. Selective laser sintering of TiO2 nanoparticle film on plastic conductive substrate for highly efficient flexible dye-sensitized solar cell application , 2014 .
[104] L G Griffith,et al. Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels. , 1998, Annals of surgery.
[105] J. Bijwe,et al. Influence of PTFE content in PEEK–PTFE blends on mechanical properties and tribo-performance in various wear modes , 2005 .
[106] C. Yan,et al. Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts , 2015 .
[107] A. Boccaccini,et al. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.
[108] S. Cummer,et al. Experimental acoustic ground cloak in air. , 2011, Physical review letters.
[109] Paulo Jorge Da Silva bartolo,et al. Virtual Prototyping & Bio Manufacturing in Medical Applications , 2008 .
[110] A. Pires,et al. Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering : Microstructural characterization , 2007 .
[111] C. Shuai,et al. Processing and characterization of laser sintered hydroxyapatite scaffold for tissue engineering , 2013, Biotechnology and Bioprocess Engineering.
[112] Steven A. Cummer,et al. Acoustic Holographic Rendering with Two-dimensional Metamaterial-based Passive Phased Array , 2016, Scientific Reports.
[113] Amit Bandyopadhyay,et al. Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[114] S. Levchik,et al. A Review of Recent Progress in Phosphorus-based Flame Retardants , 2006 .
[115] A. Fina,et al. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review , 2011 .
[116] Philipp Honigmann,et al. Patient Specific Implants from a 3D Printer – An Innovative Manufacturing Process for Custom PEEK Implants in Cranio-Maxillofacial Surgery , 2017 .
[117] Dongxu Ke,et al. Additive manufacturing of biomaterials. , 2018, Progress in materials science.
[118] J. L. Leite,et al. The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering , 2009 .
[119] Kriskrai Sitthiseripratip,et al. Scaffold Library for Tissue Engineering: A Geometric Evaluation , 2012, Comput. Math. Methods Medicine.
[120] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. , 2002, Tissue engineering.
[121] Mo Song,et al. Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes , 2013 .
[122] Dietmar W Hutmacher,et al. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.
[123] Massimiliano Fantini,et al. Rehabilitation of the nose using CAD/CAM and rapid prototyping technology after ablative surgery of squamous cell carcinoma: a pilot clinical report. , 2010, The International journal of oral & maxillofacial implants.
[124] Liang Hao,et al. Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering , 2011 .
[125] Binling Chen,et al. Poly Aryl Ether Ketones (PAEKs) and carbon-reinforced PAEK powders for laser sintering , 2017, Journal of Materials Science.
[126] Yong-Suk Choi,et al. Surgical positioning of orthodontic mini-implants with guides fabricated on models replicated with cone-beam computed tomography. , 2007, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[127] Jake E. Barralet,et al. 3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies , 2008 .
[128] Fabrizio Scarpa,et al. Vibration transmissibility and damping behaviour for auxetic and conventional foams under linear and nonlinear regimes , 2013 .
[129] L. Shao,et al. High thermal conductivity in amorphous polymer blends by engineered interchain interactions. , 2015, Nature materials.
[130] F. Fang,et al. A Novel Bio-carrier Fabricated Using 3D Printing Technique for Wastewater Treatment , 2015, Scientific Reports.
[131] Chee Kai Chua,et al. Development of a Tissue Engineering Scaffold Structure Library for Rapid Prototyping. Part 1: Investigation and Classification , 2003 .
[132] J. Bellón,et al. Use of nonporous polytetrafluoroethylene prosthesis in combination with polypropylene prosthetic abdominal wall implants in prevention of peritoneal adhesions. , 1997, Journal of biomedical materials research.
[133] Reinhard Vehring,et al. Pharmaceutical Particle Engineering via Spray Drying , 2007, Pharmaceutical Research.
[134] P. Bai,et al. Processing and Characterization of Core-Shell PA12/Silica Composites Produced by Selective Laser Sintering , 2010 .
[135] A. Basit,et al. Effect of geometry on drug release from 3D printed tablets. , 2015, International journal of pharmaceutics.
[136] J. Gilman,et al. Melt-Processable Syndiotactic Polystyrene/Montmorillonite Nanocomposites , 2003 .
[137] J. Beaman,et al. Model of the selective laser sintering of bisphenol-A polycarbonate , 1993 .
[138] Shuping Peng,et al. Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering , 2013, Biofabrication.
[139] Preliminary Study for Transparentization of SLS Parts by Resin Infiltration , 2004 .
[140] David L. Bourell,et al. Sustainability Study in Selective Laser Sintering - An Energy Perspective , 2010 .
[141] I. Gibson,et al. Selective Laser Sintered CastFormTM Polystyrene with Controlled Porosity and its Infiltration Characteristics , 2002 .
[142] Suprakas Sinha Ray,et al. POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .
[143] A. Pires,et al. Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior , 2008 .
[144] Hongwei Zhu,et al. Recent Developments in Graphene‐Based Membranes: Structure, Mass‐Transport Mechanism and Potential Applications , 2016, Advanced materials.
[145] Chee Kai Chua,et al. 3D printing by selective laser sintering of polypropylene feed channel spacers for spiral wound membrane modules for the water industry , 2016 .
[146] N. Theodoropoulou,et al. Carbon/Phenolic Nanocomposites as Advanced Thermal Protection Material in Aerospace Applications , 2013 .
[147] J. C. Huang,et al. PEEK composites reinforced by nano-sized SiO2 and Al2O3 particulates , 2005 .
[148] S. Reich,et al. Carbon-Nanotube-Polymer Nanofibers with High Thermal Conductivity , 2013 .
[149] Y. Wang,et al. Powder characteristics, microstructure and properties of graphite platelet reinforced Poly Ether Ether Ketone composites in High Temperature Laser Sintering (HT-LS) , 2015 .
[150] Sylwester Gogolewski,et al. Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes. , 2003, Journal of biomedical materials research. Part A.
[151] K E Tanner,et al. Bioactive ceramic-reinforced composites for bone augmentation , 2010, Journal of The Royal Society Interface.
[152] Shi Yusheng,et al. Development of a polymer alloy of polystyrene (PS) and polyamide (PA) for building functional part based on selective laser sintering (SLS) , 2004 .
[153] Pei-kang Bai,et al. Selective laser sintering mechanism of polymer-coated molybdenum powder , 2007 .
[154] V. Beal,et al. Statistical evaluation of laser energy density effect on mechanical properties of polyamide parts manufactured by selective laser sintering , 2009 .
[155] R. Girolamo,et al. Morphology and Mechanical Properties of the Mesomorphic Form of Isotactic Polypropylene in Stereodefective Polypropylene , 2013 .
[156] V. Bulović,et al. Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays , 2009 .
[157] J. Chen,et al. Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement , 2007 .
[158] Oana Ghita,et al. Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS) , 2014 .
[159] V. Barron,et al. Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds. , 2012, Acta biomaterialia.
[160] D. Bourell,et al. Polyamide 11-MWNT nanocomposites: Thermal and electrical conductivity measurements , 2014 .
[161] J. Beaman,et al. Thermal conductivity of polyamide 12 powder for use in laser sintering , 2013 .
[162] Eleonora Atzeni,et al. Economics of additive manufacturing for end-usable metal parts , 2012 .
[163] J. Denault,et al. Consolidation Process of PEEK/Carbon Composite for Aerospace Applications , 1998 .
[164] K. Zhou,et al. Toughening of polyamide 11 with carbon nanotubes for additive manufacturing , 2017 .
[165] Ian Gibson,et al. Effects of graphite powder on the laser sintering behaviour of polycarbonate , 2002 .
[166] Xiaoyu Zheng,et al. Multiscale metallic metamaterials. , 2016, Nature materials.
[167] John D Carroll,et al. Use of rapid prototyping in the care of patients with structural heart disease. , 2008, Trends in cardiovascular medicine.
[168] Masanori Kikuchi,et al. Development of guided bone regeneration membrane composed of β-tricalcium phosphate and poly (l-lactide-co-glycolide-co-ε-caprolactone) composites , 2004 .
[169] Chee Kai Chua,et al. Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and beta-tricalcium phosphate scaffold as bone replacement material via selective laser sintering. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[170] Martin Wegener,et al. Experiments on elastic cloaking in thin plates. , 2012, Physical review letters.
[171] Jang-Kyo Kim,et al. Ultralight Graphene Foam/Conductive Polymer Composites for Exceptional Electromagnetic Interference Shielding. , 2017, ACS applied materials & interfaces.
[172] R. Hague,et al. Laser sintering of polyamides and other polymers , 2012 .
[173] M. Meboldt,et al. Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing , 2017 .
[174] W. Peukert,et al. A novel process route for the production of spherical LBM polymer powders with small size and good flowability , 2014 .
[175] C K Chua,et al. Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. , 2011, Acta biomaterialia.
[176] Neil Hopkinson,et al. Study into the recyclability of a thermoplastic polyurethane powder for use in laser sintering , 2012 .
[177] C. Yan,et al. Selective laser sintering of polyamide 12/potassium titanium whisker composites , 2010 .
[178] Yan Xia,et al. Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications , 2013, International journal of nanomedicine.
[179] V. Scherbakov,et al. Selective Laser Sintering of Biopolymers with Micro and Nano Ceramic Additives for Medicine , 2012 .
[180] Chee Kai Chua,et al. 3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization , 2017 .
[181] Niklas Sandler,et al. 3D printed drug delivery devices: perspectives and technical challenges , 2017, Expert review of medical devices.
[182] Chee Kai Chua,et al. 3D printing and additive manufacturing : principles and applications , 2015 .
[183] Jean-Pierre Kruth,et al. Preparation and indirect selective laser sintering of alumina/PA microspheres , 2012 .
[184] Wanqin Jin,et al. Two-Dimensional-Material Membranes: A New Family of High-Performance Separation Membranes. , 2016, Angewandte Chemie.
[185] David L. Bourell,et al. Selective Laser Sintering of Polymer-Coated Silicon Carbide Powders , 1995 .
[186] S. Mohanty,et al. Effect of surface modification of fly ash on the mechanical, thermal, electrical and morphological properties of polyetheretherketone composites , 2011 .
[187] D. Wallwiener,et al. Anatomical conditions for pelvic floor reconstruction with polypropylene implant and its application for the treatment of vaginal prolapse. , 2007, European journal of obstetrics, gynecology, and reproductive biology.
[188] Chee Kai Chua,et al. Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review , 2017 .
[189] R. Carrodeguas,et al. α-Tricalcium phosphate: synthesis, properties and biomedical applications. , 2010, Acta biomaterialia.
[190] F. Klocke,et al. Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .
[191] Li Chang,et al. Wear of PEEK composites related to their mechanical performances , 2004 .
[192] H. Pang,et al. Conductive polymer composites with segregated structures , 2014 .
[193] Michael Schmidt,et al. Optical analysis of polymer powder materials for Selective Laser Sintering , 2016 .
[194] Ole Sigmund,et al. Giga-voxel computational morphogenesis for structural design , 2017, Nature.
[195] Xiaoyong Tian,et al. Process prediction of selective laser sintering based on heat transfer analysis for polyamide composite powders , 2018 .
[196] E. Weil. Phosphorus-Based Flame Retardants , 1978 .
[197] J. Torkelson,et al. Polypropylene-graphite nanocomposites made by solid-state shear pulverization: Effects of significantly exfoliated, unmodified graphite content on physical, mechanical and electrical properties , 2010 .
[198] Yusheng Shi,et al. Selective laser sintering of HIPS and investment casting technology , 2009 .
[199] Huu Hao Ngo,et al. New functional biocarriers for enhancing the performance of a hybrid moving bed biofilm reactor-membrane bioreactor system. , 2016, Bioresource technology.
[200] G. Salmoria,et al. The effects of laser energy density and particle size in the selective laser sintering of polycaprolactone/progesterone specimens: morphology and drug release , 2013 .
[201] Haeseong Jee,et al. Selective laser sintering of PCL/TCP composites for tissue engineering scaffolds † , 2010 .
[202] W. Peukert,et al. Optimized polybutylene terephthalate powders for selective laser beam melting , 2016 .
[203] A. B. de Haan,et al. Novel spacers for mass transfer enhancement in membrane separations , 2005 .
[204] Gordon G Wallace,et al. 3-dimensional (3D) fabricated polymer based drug delivery systems. , 2014, Journal of controlled release : official journal of the Controlled Release Society.
[205] C. Moseke,et al. Tetracalcium phosphate: Synthesis, properties and biomedical applications. , 2010, Acta biomaterialia.
[206] A. Yu,et al. Production of Fine Polymer Powder under Cryogenic Conditions , 2002 .
[207] Simon Gaisford,et al. 3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems. , 2016, Journal of controlled release : official journal of the Controlled Release Society.
[208] F. Kloss,et al. Degradation characteristics of α and β tri-calcium-phosphate (TCP) in minipigs , 2002 .
[209] T. Niino,et al. Transparentization of SLS Processed SMMA Copolymer Parts by Infiltrating a Thermosetting Epoxy Resin with Tuned Refractive Index , 2005 .
[210] S. Das,et al. Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering , 2006 .
[211] R. Kruse,et al. Polyamides from lactams via anionic ring-opening polymerization: 1. Chemistry and some recent findings , 1997 .
[212] Michael Schmidt,et al. Selective laser sintering of PEEK , 2007 .
[213] Mehdi Hojjati,et al. Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview , 2006 .
[214] David Z. Chen,et al. Powder processing and properties characterization of polyamide 11- Graphene nanocomposites for selective laser sintering , 2010 .
[215] J. Werkmeister,et al. Mechanical evaluation and cell response of woven polyetheretherketone scaffolds. , 2012, Journal of biomedical materials research. Part A.
[216] E Berry,et al. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. , 1997, Medical engineering & physics.
[217] H. Xia,et al. Selective Laser Sintering 3D Printing: A Way to Construct 3D Electrically Conductive Segregated Network in Polymer Matrix , 2017 .
[218] Y. Xu,et al. Three dimensional printing of carbon/carbon composites by selective laser sintering , 2016 .
[219] Jean-Pierre Kruth,et al. Additive manufacturing of zirconia parts by indirect selective laser sintering , 2014 .
[220] Shi Yusheng,et al. A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering , 2009 .
[221] Alessandro Franco,et al. Experimental Analysis of Selective Laser Sintering of Polyamide Powders: an Energy Perspective , 2010 .
[222] Michele Ciofalo,et al. Flow and mass transfer in spacer-filled channels for reverse electrodialysis: a CFD parametrical study , 2016 .
[223] Bin Duan,et al. Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering. , 2010, Acta biomaterialia.
[224] G. Levy,et al. Flowability of Powders for Selective Laser Sintering (SLS) investigated by Round Robin Test , 2014 .
[225] C. Suchicital,et al. Selective Laser Sintering of Nylon 12-PEEK Blends Formed by Cryogenic Mechanical Alloying , 2000 .
[226] P. Marquis,et al. Selective laser sintering of ultra high molecular weight polyethylene for clinical applications. , 2000, Journal of biomedical materials research.
[227] Uwe Gbureck,et al. 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects. , 2010, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[228] Y. Oshida,et al. Hydroxyapatite/PMMA composites as bone cements. , 2004, Bio-medical materials and engineering.
[229] Ze Xian Low,et al. Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques , 2017 .
[230] Claude Vincent,et al. Rehabilitation needs for older adults with stroke living at home: perceptions of four populations , 2007, BMC geriatrics.
[231] Chee Kai Chua,et al. Characterization of Creeping and Shape Memory Effect in Laser Sintered Thermoplastic Polyurethane , 2016, J. Comput. Inf. Sci. Eng..
[232] C K Chua,et al. Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects , 2004, Journal of materials science. Materials in medicine.
[233] C. Yan,et al. An organically modified montmorillonite/nylon‐12 composite powder for selective laser sintering , 2011 .
[234] Tae-Hyun Nam,et al. Role of subnano-, nano- and submicron-surface features on osteoblast differentiation of bone marrow mesenchymal stem cells. , 2012, Biomaterials.
[235] T. Maekawa,et al. POLYMERIC SCAFFOLDS IN TISSUE ENGINEERING APPLICATION: A REVIEW , 2011 .
[236] N. Hilal,et al. A review on membrane fabrication: Structure, properties and performance relationship , 2013 .
[237] J. Miao,et al. Investigation of Multimodal Electret-Based MEMS Energy Harvester With Impact-Induced Nonlinearity , 2018, Journal of Microelectromechanical Systems.
[238] Chee Kai Chua,et al. Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction , 2016 .
[239] Scott C. Brown,et al. A three-dimensional osteochondral composite scaffold for articular cartilage repair. , 2002, Biomaterials.
[240] F. E. Wiria,et al. Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering , 2007 .
[241] Yusheng Shi,et al. Investigation into the selective laser sintering of styrene–acrylonitrile copolymer and postprocessing , 2010 .
[242] Mark A. Skylar-Scott,et al. Laser-assisted direct ink writing of planar and 3D metal architectures , 2016, Proceedings of the National Academy of Sciences.
[243] Stefan Lohfeld,et al. Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling , 2013, Annals of Biomedical Engineering.
[244] Yinghong Zhou,et al. 3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis , 2012 .
[245] A. Wegner,et al. New Polymer Materials for the Laser Sintering Process: Polypropylene and Others , 2016 .
[246] K. Hagio,et al. Tailor‐made surgical guide based on rapid prototyping technique for cup insertion in total hip arthroplasty , 2009, The international journal of medical robotics + computer assisted surgery : MRCAS.
[247] C. Robinson,et al. A High-performance Material for Aerospace Applications : Development of Carbon Fiber Filled PEKK for Laser Sintering , 2016 .
[248] Sung-Jin Park,et al. Instrumented cardiac microphysiological devices via multi-material 3D printing , 2016, Nature materials.
[249] Hwa‐Hsing Tang,et al. Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts , 2011 .
[250] J. Y. Choi,et al. Analysis of errors in medical rapid prototyping models. , 2002, International journal of oral and maxillofacial surgery.
[251] Sang-Do Yeo,et al. Formation of polymer particles with supercritical fluids: A review , 2005 .
[252] L. Froyen,et al. Lasers and materials in selective laser sintering , 2002 .
[253] I. Gibson,et al. Effects of energy density on morphology and properties of selective laser sintered polycarbonate , 1999 .
[254] L. Cardon,et al. Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering , 2016, Polymers.
[255] Ying Tao,et al. Achievement of quasi-nanostructured polymer blends by solid-state shear pulverization and compatibilization by gradient copolymer addition , 2006 .
[256] C. A. Wilkie,et al. Flame retardant polymer nanocomposites , 2007 .
[257] T. Courtney,et al. Milling dynamics: Part I. Attritor dynamics: Results of a cinematographic study , 1993 .
[258] Alida Mazzoli,et al. Selective laser sintering in biomedical engineering , 2012, Medical & Biological Engineering & Computing.
[259] Hyo chan Kim,et al. Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process , 2013 .
[260] Yong Liu,et al. 3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .
[261] C. Yan,et al. Preparation and selective laser sintering of nylon-12 coated metal powders and post processing , 2009 .
[262] W. Peukert,et al. A Novel Process Chain for the Production of Spherical SLS Polymer Powders with Good Flowability , 2015 .
[263] Gunawan,et al. Fabrication and Sintering Behavior of Zinc-Doped Biphasic Calcium Phosphate Bioceramics , 2016 .
[264] Y. Song,et al. Experimental Study of the Basic Process Mechanism for Direct Selective Laser Sintering of Low-Melting Metallic Powder , 1997 .
[265] Martin L. Dunn,et al. Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.
[266] I Zein,et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.
[267] Hui Wang,et al. A Percolation Model of Thermal Conductivity for Filled Polymer Composites , 2010 .
[268] Molly M Stevens,et al. Synthetic polymer scaffolds for tissue engineering. , 2009, Chemical Society reviews.
[269] W. Qi,et al. Preparation of PA11/BaTiO3 nanocomposite powders with improved processability, dielectric and piezoelectric properties for use in selective laser sintering , 2017 .
[270] Keming Chen,et al. The preliminary performance study of the 3D printing of a tricalcium phosphate scaffold for the loading of sustained release anti-tuberculosis drugs , 2015, Journal of Materials Science.
[271] Jean-Marie Dubois,et al. Quasicrystal–polymer composites for selective laser sintering technology , 2012 .
[272] Dichen Li,et al. High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering , 2018, Composites Science and Technology.
[273] Mo Song,et al. Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering , 2014 .
[274] J. Kruth,et al. Analysis of the material properties involved in laser sintering of thermoplastic polyurethane , 2017 .
[275] Jorge Vicente Lopes da Silva,et al. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. , 2008, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.