Towards practicable methods for carbon removal from Ni-YSZ anodes and restoring the performance of commercial-sized ASC-SOFCs after carbon deposition induced degradation

Abstract Carbon deposition is one of the major degradation sources, which reduces the activity of solid oxide fuel cells (SOFC) and it can even cause irreversible cell degradation. In order to counteract this phenomenon and thus to extend the SOFC lifetime, development of effective cell-protecting strategies for carbon re-gasification and restoring of the cell performance is of crucial importance, since other methods considering prevention of this degradation phenomenon can mean an increased system complexity or reduced system performance. In the literature there is very limited data relating to the performance of SOFCs after the carbon removal process has been executed. This study aims to analyze carbon removal techniques and moreover their effect on the SOFC performance as well as possibilities for industrial application. Various innovative approaches for carbon re-gasification are scrutinized and detailed explained within this study on 20 samples, which further help to provide potential carbon removal procedures relevant for industrial SOFC systems.

[1]  C. Hochenauer,et al.  SOFC operation with carbon oxides: Experimental analysis of performance and degradation , 2018, Electrochimica Acta.

[2]  T. He,et al.  Performance of double perovskite symmetrical electrode materials Sr 2 TiFe 1–x Mo x O 6–δ ( x = 0.1, 0.2) for solid oxide fuel cells , 2018 .

[3]  Jens R. Rostrup-Nielsen,et al.  Activity of nickel catalysts for steam reforming of hydrocarbons , 1973 .

[4]  Kiyoshi Otsuka,et al.  Complete removal of carbon monoxide in hydrogen-rich gas stream through methanation over supported metal catalysts , 2004 .

[5]  J. Figueiredo,et al.  Gasification of carbon deposits on nickel catalysts , 1975 .

[6]  Raymond J. Gorte,et al.  Direct oxidation of hydrocarbons in a solid-oxide fuel cell , 2000, Nature.

[7]  Christoph Hochenauer,et al.  In-situ electrochemical characterization methods for industrial-sized planar solid oxide fuel cells Part I: Methodology, qualification and detection of carbon deposition , 2016 .

[8]  Ryan Clemmer,et al.  Effect of hydrogen on carbon formation on Ni/YSZ composites exposed to methane , 2008 .

[9]  J. Rostrup-Nielsen.  Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .

[10]  C. Hochenauer,et al.  CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni–YSZ cermet anodes , 2017 .

[11]  M. Kogler,et al.  Structural and chemical degradation mechanisms of pure YSZ and its components ZrO2 and Y2O3 in carbon-rich fuel gases. , 2016, Physical chemistry chemical physics : PCCP.

[12]  J. Nørskov,et al.  Steam Reforming and Graphite Formation on Ni Catalysts , 2002 .

[13]  Hee Chun Lim,et al.  Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel , 2002 .

[14]  H. Wise,et al.  Hydrogenation of surface carbon on alumina-supported nickel , 1979 .

[15]  J. Rostrup-Nielsen.  Mechanisms of carbon formation on nickel-containing catalysts , 1977 .

[16]  Meilin Liu,et al.  Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels , 2014 .

[17]  Christoph Hochenauer,et al.  Analysis of possibilities for carbon removal from porous anode of solid oxide fuel cells after different failure modes , 2016 .

[18]  Miao He,et al.  Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported f , 2011 .

[19]  Christoph Hochenauer,et al.  Strategy for Carbon Gasification from Porous Ni-YSZ Anodes of Industrial-Sized ASC-SOFCs and Effects of Carbon Growth , 2016 .

[20]  J. Hill,et al.  In Situ Raman Studies of Carbon Removal from High Temperature Ni–YSZ Cermet Anodes by Gas Phase Reforming Agents , 2013 .

[21]  D. Trimm,et al.  The kinetics of gasification of carbon deposited on nickel catalysts , 1979 .

[22]  J. Figueiredo,et al.  Gasification of Carbon Deposited on Metallic Catalysts , 1986 .

[23]  Phillip N. Hutton,et al.  Carbon deposition in an SOFC fueled by tar-laden biomass gas: a thermodynamic analysis , 2005 .

[24]  Clausen,et al.  Design of a surface alloy catalyst for steam reforming , 1998, Science.

[25]  C. Hochenauer,et al.  Extensive analysis of large planar SOFC: Operation with humidified methane and carbon monoxide to examine carbon deposition based degradation , 2017 .

[26]  S. Takenaka,et al.  Sequential production of H2 and CO over supported Ni catalysts , 2004 .

[27]  C. H. Bartholomew.  Carbon Deposition in Steam Reforming and Methanation , 1982 .

[28]  Ki-Tae Lee,et al.  Superior electrochemical performance of non-precious Co-Ni-Mo alloy catalyst-impregnated Sr2FeMoO6-δ as an electrode material for symmetric solid oxide fuel cells , 2016 .

[29]  Christoph Hochenauer,et al.  An experimental and numerical study of performance of large planar ESC-SOFCs and experimental investigation of carbon depositions , 2016 .

[30]  B. Maribo-Mogensen,et al.  Internal Steam Reforming in Solid Oxide Fuel Cells , 2008 .

[31]  Christoph Hochenauer,et al.  Anode regeneration following carbon depositions in an industrial-sized anode supported solid oxide fuel cell operating on synthetic diesel reformate , 2015 .

[32]  G. Froment,et al.  Steam/CO2 Reforming of Methane. Carbon Filament Formation by the Boudouard Reaction and Gasification by CO2, by H2, and by Steam: Kinetic Study , 2002 .

[33]  V. Yurkiv,et al.  Reformate-operated SOFC anode performance and degradation considering solid carbon formation: A modeling and simulation study , 2014 .

[34]  David L. Trimm,et al.  The Formation and Removal of Coke from Nickel Catalyst , 1977 .

[35]  S. Takenaka,et al.  Structural change of Ni species during the methane decomposition and the subsequent gasification of deposited carbon with CO2 over supported Ni catalysts , 2003 .

[36]  D. Trimm.  Coke Formation and Gasification in Refineries , 1986 .

[37]  J. Ruiz-Morales,et al.  Structural and electrochemical characterisation of Pr0.7Ca0.3Cr1−yMnyO3−δ as symmetrical solid oxide fuel cell electrodes , 2009 .

[38]  J. Rostrup-Nielsen.  Equilibria of decomposition reactions of carbon monoxide and methane over nickel catalysts , 1972 .

[39]  Juan Carlos Ruiz-Morales,et al.  On the simultaneous use of La0.75Sr0.25Cr0.5Mn0.5O3−δ as both anode and cathode material with improved microstructure in solid oxide fuel cells , 2006 .

[40]  Bin Chen,et al.  Experimental and modeling study of high performance direct carbon solid oxide fuel cell with in situ catalytic steam-carbon gasification reaction , 2018 .

[41]  M. Willinger,et al.  Methane Decomposition and Carbon Growth on Y2O3, Yttria-Stabilized Zirconia, and ZrO2 , 2014, Chemistry of materials : a publication of the American Chemical Society.

[42]  Bin Chen,et al.  Modeling of direct carbon solid oxide fuel cells with H2O and CO2 as gasification agents , 2017 .

[43]  Ryuji Kikuchi,et al.  Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets , 2002 .

[44]  J. Hill,et al.  Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds , 2010 .

[45]  T. M. Gür,et al.  Modeling of experimental results for carbon utilization in a carbon fuel cell , 2013 .