A cost-effective fault management system for distribution systems with distributed generators

Abstract Fault Management System (FMS) is one of the main functions in Distribution Automation System (DAS); however, the conventional FMS cannot be used in distribution systems with Distributed Generators (DGs) due to the lack of directional function. The directional fault detection device is expensive due to the expensive directional module used. In a wide-ranging distribution system, the investment cost will be very high if the fault detecting devices are expensive. Therefore, the design and implementation of a cost-effective FMS for distribution system with DGs is necessary. A Multi-Level Fault-Current Indicator (MLFCI) having a plurality of reed switches used to detect different current levels is proposed in this paper. The hardware prototype is designed and implemented. An algorithm used to locate fault based on the different fault current levels is derived. A MLFCI-based FMS for distribution systems with DGs is then realized. Experimental results demonstrate the feasibility of the proposed MLFCI. Simulation results are then used to demonstrate the validity of the proposed MLFCI-based FMS for distribution systems with DGs.

[1]  Steven E. Collier.  Ten Steps to a Smarter Grid , 2010 .

[2]  Pierluigi Siano,et al.  Failure Identification in Smart Grids Based on Petri Net Modeling , 2011, IEEE Transactions on Industrial Electronics.

[3]  T.S. Sidhu,et al.  Restoration of Directional Overcurrent Relay Coordination in Distributed Generation Systems Utilizing Fault Current Limiter , 2008, IEEE Transactions on Power Delivery.

[4]  A. Vojdani,et al.  Smart Integration , 2008, IEEE Power and Energy Magazine.

[5]  Jamal Moshtagh,et al.  A new approach to fault location in three-phase underground distribution system using combination of wavelet analysis with ANN and FLS , 2014 .

[6]  Jose Roberto Sanches Mantovani,et al.  Fast fault section estimation in distribution control centers using adaptive genetic algorithm , 2014 .

[7]  L.A. Kojovic,et al.  Summary of Distributed Resources Impact on Power Delivery Systems , 2008, IEEE Transactions on Power Delivery.

[8]  Walter G. Scott,et al.  Distributed Power Generation Planning and Evaluation , 2000 .

[9]  Guobing Song,et al.  A fault-location method for VSC-HVDC transmission lines based on natural frequency of current , 2014 .

[10]  Javad Sadeh,et al.  A new fault location algorithm for radial distribution systems using modal analysis , 2013 .

[11]  J. Teng.  A direct approach for distribution system load flow solutions , 2003 .

[12]  J. A. Buck,et al.  Engineering Electromagnetics , 1967 .

[13]  Cameron Smallwood,et al.  Expansion of distribution automation with communicating faulted circuit indicators , 2011, 2011 Rural Electric Power Conference.

[14]  Shang-Wen Luan,et al.  Development of a Novel Fault Indicator for DistributionAutomation , 2011 .

[15]  Aggelos S. Bouhouras,et al.  Selective Automation Upgrade in Distribution Networks Towards a Smarter Grid , 2010, IEEE Transactions on Smart Grid.

[16]  Ke Wang,et al.  An improved fault-location method for distribution system using wavelets and support vector regression , 2014 .

[17]  Yanfeng Gong,et al.  Distribution feeder fault location using IED and FCI information , 2011, 2011 64th Annual Conference for Protective Relay Engineers.

[18]  J. Borroy,et al.  Directional undervoltage pilot scheme for distribution generation networks protection , 2012 .

[19]  Joydeep Mitra,et al.  Microgrid Protection Using Communication-Assisted Digital Relays , 2010, IEEE Transactions on Power Delivery.

[20]  S.F. Mekhamer,et al.  A Modified Particle Swarm Optimizer for the Coordination of Directional Overcurrent Relays , 2007, IEEE Transactions on Power Delivery.