Effect of kaolin additive on PM2.5 reduction during pulverized coal combustion: Importance of sodium and its occurrence in coal

Little work has been performed on the importance of sodium and its occurrence in coal to PM2.5 (particles less than 2.5μm in aerodynamic diameter) reduction by kaolin during O2/N2 combustion and O2/CO2 combustion at high temperatures. In this study, the combustion experiment of a treated low-sodium coal with sodium aluminosilicate additive was conducted in a lab-scale drop tube furnace (DTF) at 1500°C to reveal the contribution of mineral melting and coalescence to PM2.5 reduction. Meanwhile, two typical Na-loaded coals (in which the sodium was loaded in the form of NaCl and sodium carboxylate, respectively) with kaolin added were also burnt under O2/N2 and O2/CO2 atmospheres to investigate the effect of interaction between kaolin and different chemical form sodium on PM2.5 reduction. The results show that sodium aluminosilicate is able to promote the migration of PM0.5–2.5 (particles in aerodynamic diameter of 0.5–2.5μm) to form coarse particles. Due to the stronger reactivity of sodium carboxylate reacting with kaolin than that of NaCl, PM0.2–0.5 (particles in aerodynamic diameter of 0.2–0.5μm) decreases more significantly in the combustion when adding kaolin into the NaAc-loaded coal than into NaCl-loaded coal. In addition, the PM0.2–0.5 reduction in O2/CO2 combustion is lower than that in O2/N2 combustion owing to the less vaporization of metals and the slower diffusion rate of vapors in the O2/CO2 atmosphere in comparison to those in the O2/N2 atmosphere. The mineral coalescence varied in interactions of kaolin with NaAc and NaCl. Besides, the PM0.5–2.5 emission differed as a result of differences in coal characteristic and the atmosphere, and this would cause the difference of collision frequency between particles and additive. With the joint actions of mineral coalescence and particle collision, the NaAc-loaded coal has a higher PM0.5–2.5 reduction by kaolin than NaCl-loaded coal, especially under the O2/N2 combustion. An expression describing the relationship of PM0.5–2.5 reduction, mineral coalescence and particle collision was fitted and it is found that the mineral coalescence has a stronger influence than particle collision on PM0.5–2.5 reduction by kaolin.

[1]  Minghou Xu,et al.  Control of PM1 by kaolin or limestone during O2/CO2 pulverized coal combustion , 2011 .

[2]  Lian Zhang,et al.  Formation of submicron particulate matter (PM1) during coal combustion and influence of reaction temperature , 2006 .

[3]  Yu Song,et al.  Source apportionment of PM2.5 in Beijing by positive matrix factorization , 2006 .

[4]  Lian Zhang,et al.  Effects of coal blending on the reduction of PM10 during high-temperature combustion 1. Mineral transformations , 2008 .

[5]  Diego Alvarez,et al.  Comparison of chars obtained under oxy-fuel and conventional pulverized coal combustion atmospheres , 2007 .

[6]  Defu Che,et al.  Pyrolysis and combustion characteristics of coals in oxyfuel combustion , 2012 .

[7]  Y. Ninomiya,et al.  Effect of Additives on the Reduction of PM2.5 Emissions during Pulverized Coal Combustion , 2009 .

[8]  J. Wendt,et al.  Mechanisms governing trace sodium capture by kaolinite in a downflow combustor , 1996 .

[9]  Yun Yu,et al.  Char characteristics and particulate matter formation during Chinese bituminous coal combustion , 2007 .

[10]  A. Wexler,et al.  Statistical mechanical description and modelling of turbulent collision of inertial particles , 1998, Journal of Fluid Mechanics.

[11]  C. A. Ho,et al.  Modelling of micro-particle agglomeration in turbulent flows , 2002 .

[12]  Jost O.L. Wendt,et al.  Sodium partitioning in a pulverzed coal combustion environment , 1996 .

[13]  J. Wendt,et al.  High-temperature interactions between multiple-metals and kaolinite , 2002 .

[14]  RajenderKumar Gupta,et al.  Submicron ash formation from coal combustion , 2005 .

[15]  T. Wall,et al.  Sodium ash reactions during combustion of pulverised coal , 1991 .

[16]  D. Ensor,et al.  Size Distribution of Fine Particles from Coal Combustion , 1982, Science.

[17]  Eric Croiset,et al.  Combustion characteristics of coal in a mixture of oxygen and recycled flue gas , 2006 .

[18]  G. Nathan,et al.  Mechanism and kinetics of sodium release from brown coal char particles during combustion , 2011 .

[19]  Jiamo Fu,et al.  Chemical Composition and Sources of PM10 and PM2.5 Aerosols in Guangzhou, China , 2006, Environmental monitoring and assessment.

[20]  J. Wendt,et al.  In-furnace capture of cadmium and other semi-volatile metals by sorbents , 2005 .

[21]  Wayne Seames,et al.  An initial study of the fine fragmentation fly ash particle mode generated during pulverized coal combustion , 2003 .

[22]  F. S. Lai,et al.  The self-preserving particle size distribution for Brownian coagulation in the free-molecule regime , 1972 .

[23]  I. Naruse,et al.  Influence of coal type on evolution characteristics of alkali metal compounds in coal combustion , 1998 .

[24]  Jinyue Yan,et al.  Effects of flue gas recycle on oxy-coal power generation systems , 2012 .

[25]  Mohamed Pourkashanian,et al.  CFD modeling of oxy-coal combustion: Prediction of burnout, volatile and NO precursors release , 2013 .

[26]  Minghou Xu,et al.  Formation and Control of Fine Potassium-Enriched Particulates during Coal Combustion , 2010 .

[27]  Farhang Shadman,et al.  Aluminosilicate Sorbents for Control of Alkali Vapors during Coal Combustion and Gasification , 1988 .

[28]  C. Shaddix,et al.  On the use of single-film models to describe the oxy-fuel combustion of pulverized coal char , 2012 .

[29]  Farhang Shadman,et al.  Control of ash deposition through the high temperature adsorption of alkali vapors on solid sorbents , 1989 .

[30]  J. Wendt,et al.  High-temperature sorbents for Hg, Cd, Pb, and other trace metals: Mechanisms and applications , 2010 .

[31]  A. Sarofim,et al.  The fate of sodium during pulverized coal combustion , 1985 .

[32]  Lian Zhang,et al.  Characterization of combustion‐derived individual fine particulates by computer‐controlled scanning electron microscopy , 2009 .

[33]  Minghou Xu,et al.  Mechanisms of the central mode particle formation during pulverized coal combustion , 2009 .

[34]  R. J. Quann,et al.  Vaporization and condensation of mineral matter during pulverized coal combustion , 1981 .

[35]  G. Nathan,et al.  The release of water-bound and organic sodium from Loy Yang coal during the combustion of single particles in a flat flame , 2011 .

[36]  R. J. Lang.  Anion effects in alkali-catalysed steam gasification☆ , 1986 .

[37]  I. Naruse,et al.  Emission control of sodium compounds and their formation mechanisms during coal combustion , 2007 .

[38]  James K. Edzwald,et al.  Principles and applications of dissolved air flotation , 1995 .

[39]  R. Creelman,et al.  Coal ash fusion temperatures—New characterization techniques, and implications for slagging and fouling , 1998 .

[40]  Lian Zhang,et al.  Influence of woody biomass (cedar chip) addition on the emissions of PM10 from pulverised coal combustion , 2011 .

[41]  Behdad Moghtaderi,et al.  Differences in reactivity of pulverised coal in air (O2/N2) and oxy-fuel (O2/CO2) conditions , 2009 .

[42]  S. Bhattacharya,et al.  Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part II. Effects of chemical form and valence , 2002 .

[43]  Yiannis A. Levendis,et al.  Single-coal-particle combustion in O2/N2 and O2/CO2 environments , 2008 .

[44]  RajenderKumar Gupta,et al.  Oxy-fuel combustion technology for coal-fired power generation , 2005 .

[45]  Y. Ninomiya,et al.  Evaluation of a Mg-Based Additive for Particulate Matter (PM)2.5 Reduction during Pulverized Coal Combustion† , 2010 .

[46]  J. Wendt,et al.  Mechanisms and Models Describing Sodium and Lead Scavenging by a Kaolinite Aerosol at High Temperatures , 2003 .

[47]  J. Wendt,et al.  Metal capture by sorbents in combustion processes , 1994 .

[48]  Yang Wang,et al.  Transformation of Alkali Metals during Pyrolysis and Gasification of a Lignite , 2008 .

[49]  P. A. Jensen,et al.  Oxy-fuel combustion of solid fuels , 2010 .

[50]  Jost O.L. Wendt,et al.  ON TRIMODAL PARTICLE SIZE DISTRIBUTIONS IN FLY ASH FROM PULVERIZED-COAL COMBUSTION , 2002 .