Realizing superior cycling stability of Ni-Rich layered cathode by combination of grain boundary engineering and surface coating

[1]  Lili Liu,et al.  Three new bifunctional additives for safer nickel-cobalt-aluminum based lithium ion batteries , 2018, Chinese Chemical Letters.

[2]  Feng Lin,et al.  Chemomechanical behaviors of layered cathode materials in alkali metal ion batteries , 2018 .

[3]  Piero Pianetta,et al.  Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries , 2018, Nano Energy.

[4]  Liquan Chen,et al.  Surface Doping to Enhance Structural Integrity and Performance of Li‐Rich Layered Oxide , 2018, Advanced Energy Materials.

[5]  Wangda Li,et al.  Extending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase , 2018, Advanced Energy Materials.

[6]  X. Sun,et al.  Surface and Subsurface Reactions of Lithium Transition Metal Oxide Cathode Materials: An Overview of the Fundamental Origins and Remedying Approaches , 2018, Advanced Energy Materials.

[7]  Bingbing Chen,et al.  Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density. , 2018, Chemical Society reviews.

[8]  Jianming Zheng,et al.  Designing principle for Ni-rich cathode materials with high energy density for practical applications , 2018, Nano Energy.

[9]  Ji‐Guang Zhang,et al.  Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries , 2018, Nature Energy.

[10]  Jaephil Cho,et al.  A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteries , 2018 .

[11]  D. Aurbach,et al.  Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries , 2018 .

[12]  James D. Steiner,et al.  Oxygen Release Induced Chemomechanical Breakdown of Layered Cathode Materials. , 2018, Nano letters.

[13]  Junxia Lu,et al.  Boosting the electrochemical performance of MoO3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO2 passivation layer , 2018 .

[14]  Chong Seung Yoon,et al.  Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation? , 2018 .

[15]  Alicia Koo,et al.  Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al 2 O 3 and LiAlO 2 coatings on LiNi 0.6 Co 0.2 Mn 0.2 O 2 , 2018 .

[16]  M. Whittingham,et al.  Narrowing the Gap between Theoretical and Practical Capacities in Li‐Ion Layered Oxide Cathode Materials , 2017 .

[17]  B. Polzin,et al.  Suppressed oxygen extraction and degradation of LiNixMnyCozO2 cathodes at high charge cut-off voltages , 2017, Nano Research.

[18]  Eric A Stach,et al.  Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes. , 2017, Nano letters.

[19]  Minjoon Park,et al.  Self‐Induced Concentration Gradient in Nickel‐Rich Cathodes by Sacrificial Polymeric Bead Clusters for High‐Energy Lithium‐Ion Batteries , 2017 .

[20]  Wangda Li,et al.  High-voltage positive electrode materials for lithium-ion batteries. , 2017, Chemical Society reviews.

[21]  Ji‐Guang Zhang,et al.  Li‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization , 2017 .

[22]  Jianming Zheng,et al.  Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries , 2017, Nature Communications.

[23]  Weifeng Wei,et al.  Roles of surface structure and chemistry on electrochemical processes in lithium-rich layered oxide cathodes , 2016 .

[24]  Y. Meng,et al.  Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries , 2016 .

[25]  Jaephil Cho,et al.  Enhancing Interfacial Bonding between Anisotropically Oriented Grains Using a Glue‐Nanofiller for Advanced Li‐Ion Battery Cathode , 2016, Advanced materials.

[26]  Yan Chen,et al.  Operando Lithium Dynamics in the Li‐Rich Layered Oxide Cathode Material via Neutron Diffraction , 2016 .

[27]  Doron Aurbach,et al.  Promise and reality of post-lithium-ion batteries with high energy densities , 2016 .

[28]  K. Amine,et al.  Kinetics Tuning of Li-Ion Diffusion in Layered Li(NixMnyCoz)O2. , 2015, Journal of the American Chemical Society.

[29]  Min Gyu Kim,et al.  A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. , 2015, Nano letters.

[30]  K Ramesha,et al.  Origin of voltage decay in high-capacity layered oxide electrodes. , 2015, Nature materials.

[31]  Dean J. Miller,et al.  Effectively suppressing dissolution of manganese from spinel lithium manganate via a nanoscale surface-doping approach , 2014, Nature Communications.

[32]  Jun Ma,et al.  Tuning charge–discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries , 2014, Nature Communications.

[33]  Y. Shao-horn,et al.  Revealing the atomic structure and strontium distribution in nanometer-thick La0.8Sr0.2CoO3−δ grown on (001)-oriented SrTiO3 , 2014 .

[34]  Xueliang Sun,et al.  Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application , 2014 .

[35]  Daniel P. Abraham,et al.  Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy , 2013 .

[36]  Chong Seung Yoon,et al.  Nanostructured high-energy cathode materials for advanced lithium batteries. , 2012, Nature materials.

[37]  M. Armand,et al.  Building better batteries , 2008, Nature.

[38]  K. Zhao,et al.  Mechanical and Structural Degradation of LiNixMnyCozO2 Cathode in Li-Ion Batteries: An Experimental Study , 2017 .

[39]  Dean J. Miller,et al.  Synthesis of full concentration gradient cathode studied by high energy X-ray diffraction , 2016 .