Modeling and Prediction of Shell-Side Fouling in Shell-and-Tube Heat Exchangers
暂无分享,去创建一个
[1] Michael C. Georgiadis,et al. Modeling and simulation of shell and tube heat exchangers under milk fouling , 1998 .
[2] Sandro Macchietto,et al. A Dynamic, Distributed Model of Shell-and-Tube Heat Exchangers Undergoing Crude Oil Fouling , 2011 .
[3] Sandro Macchietto,et al. Impact of deposit ageing on thermal fouling: Lumped parameter model , 2009 .
[4] Edward Alfred Donald Saunders. Heat exchangers : selection, design & construction , 1988 .
[5] Peter Glarborg,et al. Shedding of ash deposits , 2009 .
[6] B. L. Yeap,et al. Mitigation of Crude Oil Refinery Heat Exchanger Fouling Through Retrofits Based on Thermo-Hydraulic Fouling Models , 2004 .
[7] Jarruwat Charoensuk,et al. Numerical analysis of heat transfer and flow field around cross-flow heat exchanger tube with fouling , 2010 .
[8] M. Riazi. Characterization and Properties of Petroleum Fractions , 2005 .
[9] B. D. Crittenden,et al. Modelling hydrocarbon fouling , 1987 .
[10] Martyn S. Ray. Coulson and Richardson's Chemical Engineering Volume 3 (Chemical & Biochemical Reactors, and Process Control), 3rd Edition, by J.F. Richardson and D.G. Peacock (Eds), Pergamon Press, Oxford, UK (1994). 776 pages. ISBN 0‐08‐041002‐2. , 2008 .
[11] Shell-Side Characteristics of Shell-and-Tube Heat Exchangers: A Simplified Rating System for Commercial Heat Exchangers , 1958, Journal of Fluids Engineering.
[12] Norman Epstein. A MODEL OF THE INITIAL CHEMICAL REACTION FOULING RATE FOR FLOW WITHIN A HEATED TUBE, AND ITS VERIFICATION , 1994 .
[13] Sandro Macchietto,et al. Fouling in Crude Oil Preheat Trains: A Systematic Solution to an Old Problem , 2011 .
[14] Sandro Macchietto,et al. Management of cleaning types and schedules in refinery heat exchangers , 2016 .
[15] C. B. Panchal,et al. Analysis of Exxon crude-oil-slip stream coking data , 1995 .
[16] Timo Hyppänen,et al. The contribution of differently-sized ash particles to the fouling trends of a pilot-scale coal-fired combustor with an ash deposition CFD model , 2017 .
[18] M. Santos,et al. THE IMPACT OF FOULING ON THE OPTIMAL DESIGN OF A HEAT EXCHANGER NETWORK : AN INDUSTRIAL CASE STUDY , 2018 .
[19] E. F. C. Somerscales,et al. Fouling of Heat Transfer Surfaces: An Historical Review , 1990 .
[20] A. P. Watkinson,et al. A critical review of organic fluid fouling , 1990 .
[21] S. Macchietto,et al. Impact of Complex Layering Structures of Organic and Inorganic Foulants on the Thermohydraulic Performance of a Single Heat Exchanger Tube: A Simulation Study , 2016 .
[22] Mohammad Reza Jafari Nasr,et al. Modeling of crude oil fouling in preheat exchangers of refinery distillation units , 2006 .
[23] B. L. Yeap,et al. Evaluation of laboratory crude oil threshold fouling data for application to refinery pre-heat trains , 2002 .
[24] Sandro Macchietto,et al. Impact of deposit aging and surface roughness on thermal fouling: Distributed model , 2010 .
[25] Sandro Macchietto,et al. Organic and inorganic fouling in heat exchangers – Industrial case study: Analysis of fouling state , 2017 .
[26] Riazi. Characterization and Properties of Petroleum Fractions, First Edition , 2005 .
[27] Francis V. Hanson,et al. Book reviewHeat exchangers selection, design and construction: by E.A.D. Saunders, Longman Scientific and Technical, Essex, England, 1988, ISBN 0-47020870-8, pp. 568, price: US$ 99.95 (co-published in the United States with John Wiley & Sons, Inc., New York) , 1989 .
[28] Sandro Macchietto,et al. Thermo‐hydraulic analysis of refinery heat exchangers undergoing fouling , 2017 .
[29] Sandro Macchietto,et al. A new dynamic model of crude oil fouling deposits and its application to the simulation of fouling‐cleaning cycles , 2016 .