Optimization of Compressor Mounting Bracket of a Passenger Car

In the present work, the CAE tools are used for the optimization of the compressor mounting bracket used in an automobile. Both static and dynamic analysis is done for the bracket. With the objective to minimize the mass and increase the stiffness of the bracket, the new design is optimized using shape and topology optimization techniques. The optimized design given by CAE tool is then validated experimentally. The new design results in lower level of vibrations, contribute to lower mass along with lesser cost which is effective in air conditioning system as well as the efficiency of a vehicle. The results given by CAE tool had a very good correlation with the experimental results.

[1]  Basem Alzahabi,et al.  Optimization of Transmission Mount Bracket , 2003 .

[2]  Hong Suk Chang,et al.  A Study on the Analysis Method for Optimizing Mounting Brackets , 2006 .

[3]  Jihong Zhu,et al.  Topology Optimization in Aircraft and Aerospace Structures Design , 2016 .

[4]  Rudinixon Moreira Bitencourt,et al.  Shape and Topologic Optimization Of Engine Mounts , 2006 .

[5]  Jeong Woo Chang,et al.  Topology optimization of compressor bracket , 2008 .

[6]  Chao Li,et al.  Conceptual and detailed design of an automotive engine cradle by using topology, shape, and size optimization , 2015 .

[7]  Murali M. R. Krishna,et al.  Finite Element Topography and Shape Optimization of a Jounce Bumper Bracket , 2002 .

[8]  S. Laxman,et al.  Structural Optimization: Achieving a Robust and Light-Weight Design of Automotive Components , 2007 .

[9]  Kamyar Haghighi,et al.  Finite Element Optimization of an Exhaust System , 2000 .

[10]  Andrea Baldini,et al.  High performance automotive chassis design: a topology optimization based approach , 2011 .

[11]  Dohyun Jung,et al.  A study on the accelerated vibration endurance tests for battery fixing bracket in electrically driven vehicles , 2011 .

[12]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[13]  K. Suresh,et al.  Predicting the Benefits of Topology Optimization , 2015, DAC 2015.

[14]  Chang-Seong Ko,et al.  DESIGN OF STEERING COLUMN MOUNTING BRACKET FOR VIBRATION , 2003 .

[15]  Jianguang Fang,et al.  On design optimization for structural crashworthiness and its state of the art , 2017 .

[16]  John Bird.  Science for Engineering , 1995 .

[17]  Takanobu Saito,et al.  Development of Optimization Method for Automotive Parts and Structures , 2014 .

[18]  Jin Zhu,et al.  Dynamic Analysis of an Engine Chassis Mount Bracket Using the Finite Element Method , 1988 .

[19]  K. S. Raghavan,et al.  Weight Reduction of Structural Vibration Isolation Hydro- Mount Bracket through Design Analysis and Use of Advanced High Strength Steels , 2009 .

[20]  Martin Rebbert,et al.  Shape Optimization of a Single Cylinder Engine Crankshaft , 2011 .

[21]  O. P. Singh,et al.  Effect of muffler mounting bracket designs on durability , 2011 .

[22]  Eduardo Domingo Morales,et al.  Optimization Methods Applied to Development of Vehicle Structures , 2013 .

[23]  Xiao-Yong Pan,et al.  Structural Optimization for Engine Mount Bracket , 2007 .

[24]  Noboru Kikuchi,et al.  Shape and Topology Optimization of a Car Body with Multiple Loading Conditions , 1992 .

[25]  C. -H. Park,et al.  Shape optimization of rubber isolators in automotive cooling modules for the maximization of vibration isolation and fatigue life , 2011 .

[26]  Wenhua Du,et al.  Application of topology optimization to design an electric bicycle main frame , 2012 .

[27]  Myoungsu Shin,et al.  Practical Finite Element Analysis , 2008 .

[28]  P. Duysinx,et al.  Topology optimization for minimum weight with compliance and stress constraints , 2012 .

[29]  Eric A. Nelson.  Draw Direction Constraints in Topology Optimization - A Practical Example , 2003 .

[30]  Vibhay Kumar,et al.  Correlation Study of Oil Strainer Mounting Bracket for Dynamic Loading , 2013 .

[31]  Dongqing Zhang,et al.  Structure Optimization Method for Heavy Truck Propeller Shaft Bracket , 2015 .

[32]  Gaurav Deshpande,et al.  Importance of Federal Motor Vehicle Safety Standards 207/210 in Occupant Safety - A Case Study☆ , 2013 .