Multilayer organic photovoltaic devices fabricated by electrospray deposition technique and the role of the interlayer

Abstract Multilayer organic photovoltaic (OPV) devices were fabricated using the electrospray deposition method. The film-formation conditions and particularly the solvent composition were investigated to reveal the importance of the boiling point and polarity of the component solvents. The deposited film must be semi-wet to form a flat film by slow-drying at ambient conditions, resulting from the high boiling point and high affinity of o -dichlorobenzene for poly(3-hexylthiophene) (P3HT) and [6,6]-C 70 -butyric acid methyl ester (PC 70 BM). On the other hand, a polar solvent assists in the formation of an electrospray with a wide spray range under an applied voltage. Employing the film formation conditions, double-layered (P3HT and PC 70 BM) and triple-layered (P3HT, interlayer, and PC 70 BM) OPV devices were fabricated. A diketopyrrolopyrrole derivative, which is a near-infrared-absorbing ambipolar semiconductor, was applied as the interlayer material. By comparing the two devices, it was determined that the interlayer acts as a sensitizer at around 700 nm for the P3HT–PC 70 BM system.

[1]  Kwanghee Lee,et al.  Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells , 2012 .

[2]  R. Gunnella,et al.  Optimal construction parameters of electrosprayed trilayer organic photovoltaic devices , 2014 .

[3]  D. Y. Kim,et al.  Low-temperature fabrication of TiO(2) electrodes for flexible dye-sensitized solar cells using an electrospray process. , 2012, ACS applied materials & interfaces.

[4]  Takeshi Fukuda,et al.  Insertion of fullerene layer for bulk heterojunction organic photovoltaic cell fabricated by electrospray deposition method , 2013 .

[5]  Thuc‐Quyen Nguyen,et al.  Small molecule sensitizers for near-infrared absorption in polymer bulk heterojunction solar cells , 2008 .

[6]  Hao Zhang,et al.  Understanding the Halogenation Effects in Diketopyrrolopyrrole-Based Small Molecule Photovoltaics. , 2015, ACS applied materials & interfaces.

[7]  K. Leo,et al.  Increase in internal quantum efficiency in small molecular oligothiophene: C60 mixed heterojunction solar cells by substrate heating , 2010 .

[8]  I. Osaka,et al.  Molecular ordering of spin-coated and electrosprayed P3HT:PCBM thin films and their applications to photovoltaic cell , 2016 .

[9]  S. Patil,et al.  Diketopyrrolopyrrole-diketopyrrolopyrrole-based conjugated copolymer for high-mobility organic field-effect transistors. , 2012, Journal of the American Chemical Society.

[10]  Y. Yamagata,et al.  Bulk heterojunction organic photovoltaic cell fabricated by the electrospray deposition method using mixed organic solvent , 2011 .

[11]  Y. Yamashita,et al.  Ambipolar behavior of hydrogen-bonded diketopyrrolopyrrole-thiophene co-oligomers formed from their soluble precursors. , 2012, Organic letters.

[12]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[13]  Thuc‐Quyen Nguyen,et al.  A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells , 2009 .

[14]  Electrospray-Deposited Poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) for Poly(3-hexylthiophene):Phenyl-C61-Butyric Acid Methyl Ester Photovoltaic Cells , 2012 .

[15]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .

[16]  T. Fukuda,et al.  Influence of spray conditions on droplet charge per unit volume for electrospray deposition , 2014 .

[17]  Zhiqiang Gao,et al.  Enhancement of the performance of organic solar cells by electrospray deposition with optimal solvent system , 2014 .

[18]  Hiroshi Fujiwara,et al.  Three‐layered organic solar cell with a photoactive interlayer of codeposited pigments , 1991 .

[19]  Padma Gopalan,et al.  Continuous equilibrated growth of ordered block copolymer thin films by electrospray deposition. , 2013, ACS nano.

[20]  Takeshi Fukuda,et al.  Controlled donor-accepter ratio for application of organic photovoltaic cells by alternative intermittent electrospray co-deposition , 2016 .

[21]  Katsutoshi Nagai,et al.  Multilayer White Light-Emitting Organic Electroluminescent Device , 1995, Science.

[22]  Y. Yamagata,et al.  Improved Power Conversion Efficiency of Organic Photovoltaic Cell Fabricated by Electrospray Deposition Method by Mixing Different Solvents , 2012 .

[23]  Said Karim Shah,et al.  Realization of solution processed multi-layer bulk heterojunction organic solar cells by electro-spray deposition , 2012 .

[24]  Lionel Hirsch,et al.  P3HT:PCBM, Best Seller in Polymer Photovoltaic Research , 2011, Advanced materials.

[25]  R. Friend,et al.  Air-Stable n-channel Diketopyrrolopyrrole-Diketopyrrolopyrrole Oligomers for High Performance Ambipolar Organic Transistors. , 2016, ACS applied materials & interfaces.

[26]  Martin A. Green,et al.  Solar cell efficiency tables (version 48) , 2016 .

[27]  Eric T. Hoke,et al.  Accounting for Interference, Scattering, and Electrode Absorption to Make Accurate Internal Quantum Efficiency Measurements in Organic and Other Thin Solar Cells , 2010, Advanced materials.

[28]  Hiroshi Fujiwara,et al.  p‐i‐n like behavior in three‐layered organic solar cells having a co‐deposited interlayer of pigments , 1992 .

[29]  Thuc‐Quyen Nguyen,et al.  A Low Band Gap, Solution Processable Oligothiophene with a Diketopyrrolopyrrole Core for Use in Organic Solar Cells , 2008 .

[30]  Hongkyu Kang,et al.  Flexible polymer solar cell modules with patterned vanadium suboxide layers deposited by an electro-spray printing method , 2014 .

[31]  E. Bontempi,et al.  Variability of physical characteristics of electro-sprayed poly(3-hexylthiophene) thin films , 2011 .

[32]  C. Adachi,et al.  Efficient blue organic light-emitting diodes employing thermally activated delayed fluorescence , 2014, Nature Photonics.

[33]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[34]  S. Forrest,et al.  VERY HIGH-EFFICIENCY GREEN ORGANIC LIGHT-EMITTING DEVICES BASED ON ELECTROPHOSPHORESCENCE , 1999 .

[35]  A. Cricenti,et al.  Control of structural, electronic, and optical properties of eumelanin films by electrospray deposition. , 2011, The journal of physical chemistry. B.