Hydrodynamic studies in fluidized bed with internals and modeling using ANN and ANFIS

Abstract The hydrodynamics of gas-solid fluidized beds were studied covering a range of hydrodynamic parameters such as inlet air flow rate, bed height, spacing of internal and column diameter with a particular percentage open area of internal. Cross type internals with constant percentage open area were used. The influence of the above mentioned parameters on pressure drop, expansion ratio (R), fluctuation ratio (r), minimum fluidization velocity and Fluidization index (FI) were studied. The pressure drop was found to increase with increase in bed height regardless of presence or absence of internals. But in presence of internals (more numbers or less spacing) pressure drop initially decreases but beyond certain level the resistance offered by internals is more and it caused slight increase in pressure drop. The expansion ratio reduces significantly with decrease in the spacing of internals. The effect of internals on quality of fluidization has been studied. By the introduction of internals, the quality of fluidization in terms of FI had improved. Fluctuation ratio was found to reduce with the use of internals and also decrease with decrease in internal spacing. Correlations for pressure drop and expansion ratio have been developed using significant dimensionless groups. Correlated values of pressure drop and expansion ratio have been compared with their respective experimental values and were found to be in good agreement. The collected experimental data was used in the development of a model using Expert systems such as Artificial Neural Networks (ANN) and Adaptive Neuro-Fuzzy Inference Systems (ANFIS) and a comparison was made. Error analysis made for both ANFIS and ANN shows that ANFIS has better ability to model under non-linearity conditions over ANN.

[1]  P. Guigon,et al.  An Experimental Study on the Fluidisation Behaviour of Geldart C Glass Powders , 2006 .

[2]  Saroj Kumar Padhi,et al.  EFFECT OF TWISTED TAPE BAFFLES ON PRESSURE DROP, FLUCTUATION AND EXPANSION RATIOS IN GAS - SOLID FLUIDIZED BED , 2010 .

[3]  J. Manickaraj,et al.  Estimation of the Heat Transfer Coefficient in a Liquid–Solid Fluidized Bed Using an Artificial Neural Network , 2008 .

[4]  G K Roy,et al.  Influence of Coaxial-Rod- and Coaxial-Blade-Type Baffles on Bed Expansion in Gas-Solid Fluidization , 2002 .

[5]  G K Roy,et al.  Effect of Co-Axial Rod Promoters on the Dynamics of a Batch Gas-Solid Fluidized Bed , 2000 .

[6]  J. Jasiński,et al.  Neural networks application for modeling carbonizing process in fluidized bed , 2008 .

[7]  S Arulselvi,et al.  Experiments and ANFIS modelling for the biodegradation of penicillin-G wastewater using anaerobic hybrid reactor. , 2011, Bioresource technology.

[8]  K. C. Biswal,et al.  Effect of secondary fluidizing medium on hydrodynamics of gas-solid fluidized bed-Statistical and ANN approaches , 2009 .

[9]  N. Anantharaman,et al.  Hydrodynamic studies on fluidized beds with internals: Experimental and ANN approach , 2014 .

[10]  Abanti Sahoo,et al.  Artificial Neural Network approach to segregation characteristic of binary homogeneous mixtures in promoted gas–solid fluidized beds , 2007 .

[11]  Abanti Sahoo,et al.  Bed Expansion of a Squared Gas-Solid Promoted Fluidized Bed: By Modified Godard - Richardson Equation , 2005 .