2D homologous organic-inorganic hybrids as light-absorbers for planer and nanorod-based perovskite solar cells

[1]  Yingjuan Xie,et al.  Hierarchical TiO2 photocatalysts with a one-dimensional heterojunction for improved photocatalytic activities , 2015, Nano Research.

[2]  Fuzhi Huang,et al.  Thin Films of Dendritic Anatase Titania Nanowires Enable Effective Hole‐Blocking and Efficient Light‐Harvesting for High‐Performance Mesoscopic Perovskite Solar Cells , 2015 .

[3]  A. Mohamed,et al.  Self-assembly of nitrogen-doped TiO2 with exposed {001} facets on a graphene scaffold as photo-active hybrid nanostructures for reduction of carbon dioxide to methane , 2014, Nano Research.

[4]  N. Park,et al.  Synthesis, structure, and photovoltaic property of a nanocrystalline 2H perovskite-type novel sensitizer (CH3CH2NH3)PbI3 , 2012, Nanoscale Research Letters.

[5]  Namchul Cho,et al.  Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade‐Coating , 2015 .

[6]  Bin Liu,et al.  Growth of oriented single-crystalline rutile TiO(2) nanorods on transparent conducting substrates for dye-sensitized solar cells. , 2009, Journal of the American Chemical Society.

[7]  Martin Schreyer,et al.  Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3) PbI3 for solid-state sensitised solar cell applications , 2013 .

[8]  Arto V. Nurmikko,et al.  Photoconductivity and electroluminescence in lead iodide based natural quantum well structures , 1992 .

[9]  Shyamtanu Chattoraj,et al.  Pseudohalide (SCN(-))-Doped MAPbI3 Perovskites: A Few Surprises. , 2015, The journal of physical chemistry letters.

[10]  Yong Qiu,et al.  Study on the stability of CH3NH3PbI3films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells , 2014 .

[11]  Leone Spiccia,et al.  Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells , 2014 .

[12]  Young Chan Kim,et al.  Compositional engineering of perovskite materials for high-performance solar cells , 2015, Nature.

[13]  Francisco Fabregat-Santiago,et al.  Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells. , 2014, The journal of physical chemistry letters.

[14]  D. Mitzi.  Hybrid Organic‐Inorganic Electronics , 2005 .

[15]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[16]  Nam-Gyu Park,et al.  High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer. , 2013, Nano letters.

[17]  Henry J. Snaith,et al.  Direct measurement of the exciton binding energy and effective masses for charge carriers in organic–inorganic tri-halide perovskites , 2015, 1504.07025.

[18]  M. Kanatzidis,et al.  Dimensional Reduction: A Design Tool for New Radiation Detection Materials , 2011, Advanced materials.

[19]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[20]  A. Mohamed,et al.  Highly reactive {001} facets of TiO2-based composites: synthesis, formation mechanism and characterization. , 2014, Nanoscale.

[21]  D. Mitzi,et al.  Photovoltaic Properties of Two-Dimensional (CH3NH3)2Pb(SCN)2I2 Perovskite: A Combined Experimental and Density Functional Theory Study. , 2016, The journal of physical chemistry letters.

[22]  David B. Mitzi,et al.  Organic-inorganic electronics , 2001, IBM J. Res. Dev..

[23]  David B. Mitzi,et al.  Solution-processed inorganic semiconductors , 2004 .

[24]  Nripan Mathews,et al.  Incorporation of Cl into sequentially deposited lead halide perovskite films for highly efficient mesoporous solar cells. , 2014, Nanoscale.

[25]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[26]  Nam-Gyu Park,et al.  11% Efficient Perovskite Solar Cell Based on ZnO Nanorods: An Effective Charge Collection System , 2014 .

[27]  Tao Xu,et al.  Pseudohalide-induced moisture tolerance in perovskite CH3 NH3 Pb(SCN)2 I thin films. , 2015, Angewandte Chemie.

[28]  A. Jen,et al.  The roles of alkyl halide additives in enhancing perovskite solar cell performance , 2015 .

[29]  Chen Hongzheng,et al.  A Heterojunction Based on Well-ordered Organic-Inorganic Hybrid Perovskite and Its Photovoltaic Performance , 2011 .

[30]  Francesco Di Giacomo,et al.  Role of morphology and crystallinity of nanorod and planar electron transport layers on the performance and long term durability of perovskite solar cells , 2015 .

[31]  Eric T. Hoke,et al.  A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. , 2014, Angewandte Chemie.

[32]  Michael J. Heben,et al.  Investigation of degradation mechanisms of perovskite-based photovoltaic devices using laser beam induced current mapping , 2015, SPIE Optics + Photonics for Sustainable Energy.

[33]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[34]  Guangda Niu,et al.  Graphene oxide as dual functional interface modifier for improving wettability and retarding recombination in hybrid perovskite solar cells , 2014 .

[35]  Xiaomin Li,et al.  TiO2 nanorod arrays functionalized with In2S3 shell layer by a low-cost route for solar energy conversion , 2011, Nanotechnology.

[36]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.

[37]  Y. Kivshar,et al.  Wide-band negative permeability of nonlinear metamaterials , 2012, Scientific Reports.

[38]  D. Mitzi,et al.  Thin-film preparation and characterization of Cs3Sb2I9: A lead-free layered perovskite semiconductor , 2015 .

[39]  D. Mitzi,et al.  Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells , 2016, Advanced materials.

[40]  Juan Bisquert,et al.  Properties of Contact and Bulk Impedances in Hybrid Lead Halide Perovskite Solar Cells Including Inductive Loop Elements , 2016 .

[41]  W. Zhou,et al.  Composites of small Ag clusters confined in the channels of well-ordered mesoporous anatase TiO2 and their excellent solar-light-driven photocatalytic performance , 2014, Nano Research.

[42]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[43]  Nam-Gyu Park,et al.  High‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3 , 2014, Advanced materials.

[44]  M. Grätzel,et al.  Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .

[45]  A. Mohamed,et al.  Facet-dependent photocatalytic properties of TiO(2) -based composites for energy conversion and environmental remediation. , 2014, ChemSusChem.

[46]  Xiaofeng Wang,et al.  Multilayered Perovskite Materials Based on Polymeric-Ammonium Cations for Stable Large-Area Solar Cell , 2016 .

[47]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[48]  Ishihara,et al.  Excitons in self-organized semiconductor/insulator superlattices: PbI-based perovskite compounds. , 1995, Physical review. B, Condensed matter.

[49]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[50]  M. Grätzel,et al.  Lead-Free MA2CuCl(x)Br(4-x) Hybrid Perovskites. , 2016, Inorganic chemistry.

[51]  Ishihara,et al.  Dielectric confinement effect on excitons in PbI4-based layered semiconductors. , 1992, Physical review. B, Condensed matter.

[52]  J. Temmyo,et al.  Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application. , 2013, Optics express.

[53]  Wei Chen,et al.  Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers , 2015, Science.

[54]  Omar K Farha,et al.  2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications. , 2015, Journal of the American Chemical Society.

[55]  Sandeep Kumar Pathak,et al.  Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells , 2013, Nature Communications.

[56]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[57]  P. K. Kanaujia,et al.  Strong Photocurrent from Two-Dimensional Excitons in Solution-Processed Stacked Perovskite Semiconductor Sheets , 2015, ACS applied materials & interfaces.

[58]  Zhike Liu,et al.  Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity , 2016, Nature Communications.