Microstructural characterization of Cu/Al composites and effect of cooling rate at the Cu/Al interfacial region
暂无分享,去创建一个
[1] Yongnam Kwon,et al. Influence of secondary warm rolling on the interface microstructure and mechanical properties of a roll-bonded three-ply Al/Mg/Al sheet , 2014 .
[2] Y. Fu,et al. Characteristics of clad aluminum hollow billet prepared by horizontal continuous casting , 2014 .
[3] M. R. Toroghinejad,et al. Microstructure and mechanical properties of transient liquid phase bonding of Al2O3p/Al nanocomposite using copper interlayer , 2014 .
[4] Ravi Kumar,et al. Influence of spark plasma sintering temperature on the densification, microstructure and mechanical properties of Al-4.5 wt.%Cu alloy , 2013, Acta Metallurgica Sinica (English Letters).
[5] Caiwang Tan,et al. Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding , 2013 .
[6] Yongjun Tang,et al. Effect of cooling rate on the magnetic properties of Fe53Nd37Al10 alloy , 2013, International Journal of Minerals, Metallurgy, and Materials.
[7] T. Lee,et al. Controlling Al/Cu composite diffusion layer during hydrostatic extrusion by using colloidal Ag , 2013 .
[8] M. Divandari,et al. Investigation on interface of Al/Cu couples in compound casting , 2013 .
[9] Yongnam Kwon,et al. Solid-state bonding between Al and Cu by vacuum hot pressing , 2013 .
[10] Weite Wu,et al. Growth of intermetallic phases in Al/Cu composites at various annealing temperatures during the ARB process , 2012, Metals and Materials International.
[11] L. Zuo,et al. Effect of High Magnetic Field on Growth Behavior of Compound Layers during Reactive Diffusion between Solid Cu and Liquid Al , 2011 .
[12] E. Hug,et al. Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires , 2011 .
[13] Xin-hua Liu,et al. Interfacial Microstructure and Bonding Strength of Copper Cladding Aluminum Rods Fabricated by Horizontal Core-Filling Continuous Casting , 2011 .
[14] A. Taheri,et al. An investigation on diffusion bonding of aluminum to copper using equal channel angular extrusion process , 2011, Materials letters.
[15] B. Xiao,et al. Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds , 2010 .
[16] G. Qiao,et al. Microstructure and tensile behavior of Cu–Al multi-layered composites prepared by plasma activated sintering , 2010 .
[17] A. Hadian,et al. Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer , 2010 .
[18] A. Golpayegani,et al. Study of Al/Cu rich phases formed in A356 alloy by inserting Cu wire in pattern in LFC process , 2009 .
[19] D. Sun,et al. Microstructure and mechanical properties of transient liquid phase bonded TiCP/AZ91D joints using copper interlayer , 2009 .
[20] W. Tillmann,et al. Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer , 2009 .
[21] A. Kokabi,et al. Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy , 2009 .
[22] H. Kawakami,et al. Bonding process of Al/Cu dissimilar bonding with liquefaction in air , 2007 .
[23] M. Y. Yau,et al. Formation of Al2Cu and AlCu intermetallics in Al(Cu) alloy matrix composites by reaction sintering , 2004 .
[24] T. Narita,et al. Numerical Modeling of the Transient Liquid-phase Diffusion Bonding Process of Al Using Cu Filler Metal , 2003 .
[25] Binggang Zhang,et al. Microstructure and strength of diffusion-bonded joints of TiAl base alloy to steel , 2002 .
[26] B. Wei,et al. Microstructure evolution and solidification kinetics of undercooled Co–Ge eutectic alloys , 2002 .
[27] F. Molleda,et al. Special features of the formation of the diffusion bonded joints between copper and aluminium , 1988 .
[28] J. Hunt,et al. Morphological observations of the eutectic-dendrite breakdown in the Al-CuAl2 system , 1971 .