Performance Analysis of Scattering-Level Multiplexing (SLMux) in Distributed Fiber-Optic Backscatter Reflectometry Physical Sensors

Optical backscatter reflectometry (OBR) is a method for the interrogation of Rayleigh scattering occurring in each section of an optical fiber, resulting in a single-fiber-distributed sensor with sub-millimeter spatial resolution. The use of high-scattering fibers, doped with MgO-based nanoparticles in the core section, provides a scattering increase which can overcome 40 dB. Using a configuration-labeled Scattering-Level Multiplexing (SLMux), we can arrange a network of high-scattering fibers to perform a simultaneous scan of multiple fiber sections, therefore extending the OBR method from a single fiber to multiple fibers. In this work, we analyze the performance and boundary limits of SLMux, drawing the limits of detection of N-channel SLMux, and evaluating the performance of scattering-enhancement methods in optical fibers.

[1]  M. Froggatt,et al.  High-spatial-resolution distributed strain measurement in optical fiber with rayleigh scatter. , 1998, Applied optics.

[2]  Wilfried Blanc,et al.  Formation and applications of nanoparticles in silica optical fibers , 2015, 1510.02611.

[3]  S. Martín-López,et al.  Resolving 1 million sensing points in an optimized differential time-domain Brillouin sensor. , 2017, Optics letters.

[4]  Wilfried Blanc,et al.  Compositional Changes at the Early Stages of Nanoparticles Growth in Glasses , 2019, The Journal of Physical Chemistry C.

[5]  Carlo Molardi,et al.  Simultaneous Distributed Sensing on Multiple MgO-Doped High Scattering Fibers by Means of Scattering-Level Multiplexing , 2019, Journal of Lightwave Technology.

[6]  Emiliano Schena,et al.  Fiber optic sensors for sub-centimeter spatially resolved measurements: Review and biomedical applications , 2018, Optical Fiber Technology.

[7]  P. Dinning,et al.  Design of a high-sensor count fibre optic manometry catheter for in-vivo colonic diagnostics. , 2009, Optics express.

[8]  Iulian Iordachita,et al.  Distributed fiber optics 3D shape sensing by means of high scattering NP-doped fibers simultaneous spatial multiplexing. , 2019, Optics express.

[9]  Daniele Tosi,et al.  Design of an All-POF-Fiber Smartphone Multichannel Breathing Sensor With Camera-Division Multiplexing , 2019, IEEE Sensors Letters.

[10]  Daniele Tosi,et al.  Simultaneous Detection of Multiple Fiber-Optic Fabry–Perot Interferometry Sensors With Cepstrum-Division Multiplexing , 2016, Journal of Lightwave Technology.

[11]  Byoungho Lee,et al.  Review of the present status of optical fiber sensors , 2003 .

[12]  J. D. Winefordner,et al.  Application of correlation analysis for signal-to-noise enhancement in flame spectrometry. Use of correlation in determination of rhodium by atomic fluorescence , 1973 .

[13]  P. Dinning,et al.  In-vivo demonstration of a high resolution optical fiber manometry catheter for diagnosis of gastrointestinal motility disorders. , 2009, Optics express.

[14]  Ivana Gasulla,et al.  Spatial Division Multiplexed Microwave Signal processing by selective grating inscription in homogeneous multicore fibers , 2017, Scientific Reports.

[15]  Raman Kashyap,et al.  Intra-Arterial Image Guidance With Optical Frequency Domain Reflectometry Shape Sensing , 2019, IEEE Transactions on Medical Imaging.

[16]  S. Loranger,et al.  Rayleigh scatter based order of magnitude increase in distributed temperature and strain sensing by simple UV exposure of optical fibre , 2015, Scientific Reports.

[17]  J. Macalpine,et al.  A novel wavelength detection technique for fiber Bragg grating sensors , 2002, IEEE Photonics Technology Letters.

[18]  Liang Chen,et al.  Recent Progress in Distributed Fiber Optic Sensors , 2012, Sensors.

[19]  Seungtae Oh,et al.  Discrimination of temperature and strain with a single FBG based on the birefringence effect. , 2004, Optics express.

[20]  Emiliano Schena,et al.  Multi-fiber distributed thermal profiling of minimally invasive thermal ablation with scattering-level multiplexing in MgO-doped fibers. , 2019, Biomedical optics express.

[21]  M. A. Putnam,et al.  Stepped-wavelength optical-fiber Bragg grating arrays fabricated in line on a draw tower. , 1994, Optics letters.

[22]  Elfed Lewis,et al.  Optical fiber sensors-based temperature distribution measurement in ex vivo radiofrequency ablation with submillimeter resolution , 2014, Journal of biomedical optics.

[23]  Wilfried Blanc,et al.  Fabrication of Rare Earth‐Doped Transparent Glass Ceramic Optical Fibers by Modified Chemical Vapor Deposition , 2011, 1108.3195.

[24]  Kevin P. Chen,et al.  Distributed Optical Fiber Sensors with Ultrafast Laser Enhanced Rayleigh Backscattering Profiles for Real-Time Monitoring of Solid Oxide Fuel Cell Operations , 2017, Scientific Reports.

[25]  Michael A. Davis,et al.  Fiber grating sensors , 1997 .

[26]  Carlo Molardi,et al.  Fiber Bragg Grating (FBG) Sensors in a High-Scattering Optical Fiber Doped with MgO Nanoparticles for Polarization-Dependent Temperature Sensing , 2019, Applied Sciences.

[27]  Victor Lambin Iezzi,et al.  Enhancement of accuracy in shape sensing of surgical needles using optical frequency domain reflectometry in optical fibers. , 2017, Biomedical optics express.

[28]  Carlo Molardi,et al.  Refractive Index Sensor by Interrogation of Etched MgO Nanoparticle-Doped Optical Fiber Signature , 2019, IEEE Photonics Technology Letters.

[29]  Ping Lu,et al.  Bragg grating inscription in various optical fibers with femtosecond infrared lasers and a phase mask , 2011 .

[30]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.