Assessing the performance of foams stabilized by anionic/nonionic surfactant mixture under high temperature and pressure conditions

[1]  Shiti Cui,et al.  Flow characteristics and EOR mechanism of foam flooding in fractured vuggy reservoirs , 2022, Journal of Petroleum Science and Engineering.

[2]  Hong-Na Zhang,et al.  Experimental study on the characteristics of temperature dependent surface/interfacial properties of a non-ionic surfactant aqueous solution at quasi-thermal equilibrium condition , 2022, International Journal of Heat and Mass Transfer.

[3]  Jiabin Dong,et al.  Effects of surface geometry on advection–diffusion process in rough fractures , 2021 .

[4]  Liwei Sun,et al.  Porous amino acid-functionalized poly(ionic liquid) foamed with supercritical CO2 and its application in CO2 adsorption , 2021 .

[5]  Yu-Zhong Wang,et al.  A dimensional stable hydrogel-born foam with enhanced mechanical and thermal insulation and fire-retarding properties via fast microwave foaming , 2020 .

[6]  Zhiyuan Wang,et al.  A dynamic model for predicting the geometry of bubble entrapped in yield stress fluid , 2020 .

[7]  Zhaomin Li,et al.  A review of development methods and EOR technologies for carbonate reservoirs , 2020, Petroleum Science.

[8]  Shuangxing Liu,et al.  Molecular Dynamics Study on CO2 Foam Films with Sodium Dodecyl Sulfate: Effects of Surfactant Concentration, Temperature, and Pressure on the Interfacial Tension , 2020 .

[9]  Weipeng Yang,et al.  Stabilization mechanism of fly ash three-phase foam and its sealing capacity on fractured reservoirs , 2020 .

[10]  P. Zitha,et al.  Oil Recovery by Alkaline/Surfactant/Foam Flooding: Effect of Drive-Foam Quality on Oil-Bank Propagation , 2019, SPE Journal.

[11]  J. Hou,et al.  Experimental study on nitrogen drive and foam assisted nitrogen drive in varying-aperture fractures of carbonate reservoir , 2019, Journal of Petroleum Science and Engineering.

[12]  Nurudeen Yekeen,et al.  Synergistic effects of nanoparticles and surfactants on n-decane-water interfacial tension and bulk foam stability at high temperature , 2019, Journal of Petroleum Science and Engineering.

[13]  Shuangxi Nie,et al.  In-situ fabrication of cellulose foam HKUST-1 and surface modification with polysaccharides for enhanced selective adsorption of toluene and acidic dipeptides , 2019, Chemical Engineering Journal.

[14]  Zhanghua Lian,et al.  Lost circulation material for abnormally high temperature and pressure fractured-vuggy carbonate reservoirs in Tazhong block, Tarim Basin, NW China , 2019, Petroleum Exploration and Development.

[15]  K. Mohanty,et al.  Novel Application of Cationic Surfactants for Foams With Wettability Alteration in Oil-Wet Low-Permeability Carbonate Rocks , 2018, SPE Journal.

[16]  Zhenghe Xu,et al.  Effect of temperature on foamability using a thermoresponsive polymer , 2018, AIP Advances.

[17]  E. Bonnin,et al.  Ice-templating beet-root pectin foams: Controlling texture, mechanics and capillary properties , 2018, Chemical Engineering Journal.

[18]  E. Santiso,et al.  Carbon Sequestration through CO2 Foam-Enhanced Oil Recovery: A Green Chemistry Perspective , 2018, Engineering.

[19]  Ming Luo,et al.  Foam-EOR method in fractured-vuggy carbonate reservoirs: Mechanism analysis and injection parameter study , 2018 .

[20]  W. Alameri,et al.  Laboratory Study of CO2 Foam Flooding in High Temperature, High Salinity Carbonate Reservoirs Using Co-injection Technique , 2017 .

[21]  D. Schechter,et al.  Enhancing the Stability of Foam by the Use of Nanoparticles , 2017 .

[22]  W. Qiao,et al.  Effects of silica nanoparticles and polymers on foam stability with sodium dodecylbenzene sulfonate in water–liquid paraffin oil emulsions at high temperatures , 2017 .

[23]  Zhaomin Li,et al.  Experimental study on the dynamic filtration control performance of N2/liquid CO2 foam in porous media , 2017 .

[24]  B. Wang,et al.  Research on nitrogen foam for enhancing oil recovery in harsh reservoirs , 2017 .

[25]  Liang Zhang,et al.  The stability study of CO2 foams at high pressure and high temperature , 2017 .

[26]  Deming Wang,et al.  Effect of Temperature on Foaming Ability and Foam Stability of Typical Surfactants Used for Foaming Agent , 2017 .

[27]  Zhaomin Li,et al.  Silica nanoparticles as a high-performance filtrate reducer for foam fluid in porous media , 2017 .

[28]  C. Dalmazzone,et al.  Crude oil foams. Part 1 – A novel methodology for studying non-aqueous foams formed by depressurization , 2016 .

[29]  Binfei Li,et al.  Study of Nanoparticle–Surfactant-Stabilized Foam as a Fracturing Fluid , 2015 .

[30]  J. D. Berry,et al.  Measurement of surface and interfacial tension using pendant drop tensiometry. , 2015, Journal of colloid and interface science.

[31]  S. A. Farzaneh,et al.  Experimental investigation of CO2-foam stability improvement by alkaline in the presence of crude oil , 2015 .

[32]  Shaoran Ren,et al.  Dissolution of surfactants in supercritical CO2 with co-solvents , 2015 .

[33]  T. Willers,et al.  Temperature effect on foamability, foam stability, and foam structure of milk , 2014 .

[34]  Ying Li,et al.  Ultra-stable aqueous foam stabilized by water-soluble alkyl acrylate crosspolymer , 2014 .

[35]  D. Langevin,et al.  Unusually stable liquid foams. , 2014, Advances in colloid and interface science.

[36]  J. Bruining,et al.  Capillary pressure for the sand–CO2–water system under various pressure conditions. Application to CO2 sequestration , 2007 .

[37]  Anh V. Nguyen,et al.  Effect of sodium dodecyl sulphate and dodecanol mixtures on foam film drainage: examining influence of surface rheology and intermolecular forces , 2007 .

[38]  Anh V. Nguyen.  Liquid drainage in single plateau borders of foam. , 2002, Journal of colloid and interface science.

[39]  Koichi Terasaka,et al.  Bubble formation at a nozzle submerged in viscous liquids having yield stress , 2001 .

[40]  Howard A. Stone,et al.  A Generalized View of Foam Drainage: Experiment and Theory , 2000 .

[41]  I. D. Morrison.  Ross's rule: Sydney Ross and the phase diagram , 1996 .

[42]  J. O. Amaefule,et al.  Thermal Stability of Surfactants for Reservoir Application (includes associated papers 11323 and 11597 ) , 1982 .

[43]  L. L. Handy,et al.  Effect of Temperature on Surfactant Adsorption in Porous Media , 1981 .