Abstract Advanced numerical simulations using computers provide a robust tool for assessing the structural integrity of existing reinforced concrete (RC) structures. This paper presents an application of modern computer simulation, in the context of nonlinear finite element method (nonlinear FEM), to predict the loadbearing capacity and failure behavior of different types of RC column–slab connections strengthened by steel profiles in an existing complex industrial RC structure in Austria. Two typical connections are subjected to primary numerical investigation using nonlinear three-dimensional FEM with a newly developed constitutive model for concrete. Subsequent verification tests indicate that the primary numerical analyses are quite consistent with the test observations. Post-numerical analyses of the verification tests are also carried out taking into account the measured material properties. The simulation results are in very good agreement with the test data. Based on the numerical results, the load-flow mechanisms and the load-sharing portions in the connections are identified. The ultimate loads of the rest of the connections are then determined using numerical analysis, hence no further tests are necessary. On the basis of the numerical simulations, rational decisions on the structure are made.
[1]
Lin-Hai Han,et al.
Performance of concrete-filled thin-walled steel tubes under pure torsion
,
2007
.
[2]
Ferhun C. Caner,et al.
Microplane constitutive model M4L for concrete. II: Calibration and validation
,
2013
.
[3]
Mathias Johansson,et al.
Finite element study of concrete-filled steel tubes using a new confinement-sensitive concrete compression model
,
2001
.
[4]
Jiabin Li,et al.
Microplane constitutive model M4L for concrete. I: Theory
,
2013
.
[5]
Yoshiaki Goto,et al.
Nonlinear Finite Element Analysis for Cyclic Behavior of Thin-Walled Stiffened Rectangular Steel Columns with In-Filled Concrete
,
2012
.
[6]
R. P. Johnson,et al.
General rules and rules for buildings
,
2004
.