A nonlinear semi-concurrent multiscale method for fractures

[1]  Seungho Lee,et al.  Nano-scale electro-kinetics in one and two-phase flows: Instabilities, bifurcations, and pattern formation , 2015 .

[2]  Timon Rabczuk,et al.  Concurrent multiscale modeling of three dimensional crack and dislocation propagation , 2015, Adv. Eng. Softw..

[3]  H. Nguyen-Xuan,et al.  An extended isogeometric thin shell analysis based on Kirchhoff-Love theory , 2015 .

[4]  T. Rabczuk,et al.  T-spline based XIGA for fracture analysis of orthotropic media , 2015 .

[5]  Saeed Ziaei-Rad,et al.  A semi-concurrent multiscale approach for modeling damage in nanocomposites , 2014 .

[6]  Timon Rabczuk,et al.  The extended unsymmetric frontal solution for multiple-point constraints , 2014 .

[7]  Dwayne D. Tannant,et al.  Unified continuum/discontinuum modeling framework for slope stability assessment , 2014 .

[8]  X. Zhuang,et al.  A comparative study on unfilled and filled crack propagation for rock-like brittle material , 2014 .

[9]  Timon Rabczuk,et al.  Finite strain fracture of 2D problems with injected anisotropic softening elements , 2014 .

[10]  T. Rabczuk,et al.  Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation , 2014 .

[11]  Timon Rabczuk,et al.  An adaptive multiscale method for quasi-static crack growth , 2014 .

[12]  T. Rabczuk,et al.  Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) , 2014 .

[13]  T. Rabczuk,et al.  Optimization of fiber distribution in fiber reinforced composite by using NURBS functions , 2014 .

[14]  Charles E. Augarde,et al.  A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields , 2014 .

[15]  N. Nguyen-Thanh,et al.  An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics , 2014 .

[16]  Hehua Zhu,et al.  An improved meshless Shepard and least squares method possessing the delta property and requiring no singular weight function , 2014 .

[17]  Timon Rabczuk,et al.  Efficient coarse graining in multiscale modeling of fracture , 2014 .

[18]  X. Zhuang,et al.  A Meshless Local Petrov-Galerkin Shepard and Least-Squares Method Based on Duo Nodal Supports , 2014 .

[19]  Timon Rabczuk,et al.  A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage , 2014 .

[20]  Timon Rabczuk,et al.  A computational library for multiscale modeling of material failure , 2013, Computational Mechanics.

[21]  Timon Rabczuk,et al.  Reproducing Kernel Triangular B-spline-based FEM for Solving PDEs , 2013 .

[22]  P. Areias,et al.  Element-wise algorithm for modeling ductile fracture with the Rousselier yield function , 2013 .

[23]  T. Rabczuk,et al.  Molecular dynamics/xfem coupling by a three-dimensional extended bridging domain with applications to dynamic brittle fracture , 2013 .

[24]  Kjell Magne Mathisen,et al.  A new and simple locking-free triangular thick plate element using independent shear degrees of freedom , 2013 .

[25]  Timon Rabczuk,et al.  Initially rigid cohesive laws and fracture based on edge rotations , 2013 .

[26]  Hung Nguyen-Xuan,et al.  A Phantom-Node Method with Edge-Based Strain Smoothing for Linear Elastic Fracture Mechanics , 2013, J. Appl. Math..

[27]  Timon Rabczuk,et al.  Finite strain fracture of plates and shells with configurational forces and edge rotations , 2013 .

[28]  Hehua Zhu,et al.  A GENERALIZED AND EFFICIENT METHOD FOR FINITE COVER GENERATION IN THE NUMERICAL MANIFOLD METHOD , 2013 .

[29]  Hung Nguyen-Xuan,et al.  AN APPLICATION OF THE ES-FEM IN SOLID DOMAIN FOR DYNAMIC ANALYSIS OF 2D FLUID–SOLID INTERACTION PROBLEMS , 2013 .

[30]  Hung Nguyen-Xuan,et al.  AN EDGE-BASED SMOOTHED FINITE ELEMENT METHOD FOR ANALYSIS OF LAMINATED COMPOSITE PLATES , 2013 .

[31]  Hung Nguyen-Xuan,et al.  COMPUTATION OF LIMIT LOAD USING EDGE-BASED SMOOTHED FINITE ELEMENT METHOD AND SECOND-ORDER CONE PROGRAMMING , 2013 .

[32]  H. Nguyen-Xuan,et al.  Free and forced vibration analysis using the n-sided polygonal cell-based smoothed finite element method (nCS-FEM) , 2013 .

[33]  Charles E. Augarde,et al.  Fracture modeling using meshless methods and level sets in 3D: Framework and modeling , 2012 .

[34]  Louis Ngai Yuen Wong,et al.  Influence of flaw inclination angle and loading condition on crack initiation and propagation , 2012 .

[35]  X. Zhuang,et al.  On error control in the element-free Galerkin method , 2012 .

[36]  Phill-Seung Lee,et al.  Phantom-node method for shell models with arbitrary cracks , 2012 .

[37]  Vinh Phu Nguyen,et al.  MULTISCALE CONTINUOUS AND DISCONTINUOUS MODELING OF HETEROGENEOUS MATERIALS: A REVIEW ON RECENT DEVELOPMENTS , 2011 .

[38]  Hehua Zhu,et al.  HIGH ROCK SLOPE STABILITY ANALYSIS USING THE ENRICHED MESHLESS SHEPARD AND LEAST SQUARES METHOD , 2011 .

[39]  L. Wong,et al.  Cracking Processes in Rock-Like Material Containing a Single Flaw Under Uniaxial Compression: A Numerical Study Based on Parallel Bonded-Particle Model Approach , 2011, Rock Mechanics and Rock Engineering.

[40]  Raúl A. Feijóo,et al.  On micro‐to‐macro transitions for multi‐scale analysis of non‐linear heterogeneous materials: unified variational basis and finite element implementation , 2011 .

[41]  S. Bordas,et al.  Accurate fracture modelling using meshless methods, the visibility criterion and level sets: Formulation and 2D modelling , 2011 .

[42]  Miaolin Feng,et al.  Asymptotic expansion homogenization for simulating progressive damage of 3D braided composites , 2010 .

[43]  Antonio Bobet,et al.  Crack coalescence in specimens with open and closed flaws: A comparison , 2009 .

[44]  Louis Ngai Yuen Wong,et al.  Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression , 2009 .

[45]  B. Schrefler,et al.  Multiscale Methods for Composites: A Review , 2009 .

[46]  W. Brekelmans,et al.  FE2 computational homogenization for the thermo-mechanical analysis of heterogeneous solids , 2008 .

[47]  Marc Duflot,et al.  Meshless methods: A review and computer implementation aspects , 2008, Math. Comput. Simul..

[48]  Sheng-Qi Yang,et al.  Experimental Investigation on Strength and Failure Behavior of Pre-cracked Marble Under Conventional Triaxial Compression , 2008 .

[49]  Julien Yvonnet,et al.  Computational homogenization for nonlinear conduction in heterogeneous materials using model reduction , 2008 .

[50]  Jacob Fish,et al.  Toward realization of computational homogenization in practice , 2008 .

[51]  M. Geers,et al.  Computational homogenization for heat conduction in heterogeneous solids , 2008 .

[52]  T. Rabczuk,et al.  A meshfree thin shell method for non‐linear dynamic fracture , 2007 .

[53]  T. Belytschko,et al.  A three dimensional large deformation meshfree method for arbitrary evolving cracks , 2007 .

[54]  Dietrich Stoyan,et al.  Modelling the microstructure of concrete with spherical grains , 2006 .

[55]  Yin-Ping Li,et al.  Experimental research on pre-cracked marble under compression , 2005 .

[56]  P. Hosseini-Tehrani,et al.  Boundary element analysis of stress intensity factor KI in some two-dimensional dynamic thermoelastic problems , 2005 .

[57]  Ted Belytschko,et al.  Cracking particles: a simplified meshfree method for arbitrary evolving cracks , 2004 .

[58]  T. Belytschko,et al.  Stable particle methods based on Lagrangian kernels , 2004 .

[59]  P. Bouchard,et al.  Numerical modelling of crack propagation: automatic remeshing and comparison of different criteria , 2003 .

[60]  K. T. Chau,et al.  Analysis of crack coalescence in rock-like materials containing three flaws—Part I: experimental approach , 2001 .

[61]  S. Suresh,et al.  A comprehensive unit cell model: a study of coupled effects in piezoelectric 1–3 composites , 2000 .

[62]  W. Brekelmans,et al.  Overall behaviour of heterogeneous elastoviscoplastic materials: effect of microstructural modelling , 2000 .

[63]  J. Chaboche,et al.  FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials , 2000 .

[64]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[65]  Herbert H. Einstein,et al.  Fracture coalescence in rock-type materials under uniaxial and biaxial compression , 1998 .

[66]  Herbert H. Einstein,et al.  Numerical modeling of fracture coalescence in a model rock material , 1998 .

[67]  Sören Östlund,et al.  FEM-remeshing technique applied to crack growth problems , 1998 .

[68]  K. T. Chau,et al.  Crack coalescence in a rock-like material containing two cracks , 1998 .

[69]  Chaoshui Xu,et al.  Stress intensity factor evaluation for cracked chevron notched brazilian disc specimens , 1994 .

[70]  Subra Suresh,et al.  An experimental and numerical study of deformation in metal-ceramic composites , 1989 .

[71]  R. Christensen,et al.  Solutions for effective shear properties in three phase sphere and cylinder models , 1979 .

[72]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[73]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[74]  S. Shtrikman,et al.  On some variational principles in anisotropic and nonhomogeneous elasticity , 1962 .

[75]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[76]  T. Rabczuk,et al.  Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters , 2015 .

[77]  T. Rabczuk,et al.  A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites , 2015 .

[78]  T. Rabczuk,et al.  A three dimensional extended Arlequin method for dynamic fracture , 2015 .

[79]  Stéphane Bordas,et al.  A meshless adaptive multiscale method for fracture , 2015 .

[80]  Hehua Zhu,et al.  A 3D computational homogenization model for porous material and parameters identification , 2015 .

[81]  T. Rabczuk,et al.  XLME interpolants, a seamless bridge between XFEM and enriched meshless methods , 2014 .

[82]  Louis Ngai Yuen Wong,et al.  Frictional crack initiation and propagation analysis using the numerical manifold method , 2012 .

[83]  A. Fakhimi,et al.  Discrete element analysis of the effect of pore size and pore distribution on the mechanical behavior of rock , 2011 .

[84]  J. Schröder,et al.  A Framework for the Two-Scale Homogenization of Electro-Mechanically Coupled Boundary Value Problems , 2010 .

[85]  T. Belytschko,et al.  Immersed particle method for fluid–structure interaction , 2009 .

[86]  Fredrik Larsson,et al.  Variationally consistent computational homogenization of transient heat flow , 2009 .

[87]  E Weinan,et al.  Heterogeneous multiscale methods: A review , 2007 .

[88]  Xiaoping Lu,et al.  A subregion DRBEM formulation for the dynamic analysis of two-dimensional cracks , 2006, Math. Comput. Model..

[89]  Kumar Vemaganti,et al.  Hierarchical modeling of heterogeneous solids , 2006 .

[90]  Silvio Valente,et al.  Size effects in the mixed mode crack propagation: Softening and snap-back analysis , 1990 .

[91]  E. Oñate,et al.  A plastic-damage model for concrete , 1989 .