论文信息 - Two-phase flow measurements with advanced instrumented spool pieces and local conductivity probes

Two-phase flow measurements with advanced instrumented spool pieces and local conductivity probes

A series of two-phase, air-water and steam-water tests performed with instrumented spool pieces and with conductivity probes obtained from Atomic Energy of Canada, Ltd. is described. The behavior of the three-beam densitometer, turbine meter, and drag flowmeter is discussed in terms of two-phase models. Application of some two-phase mass flow models to the recorded spool piece data is made and preliminary results are shown. Velocity and void fraction information derived from the conductivity probes is presented and compared to velocities and void fractions obtained using the spool piece instrumentation.

K. G. Turnage | C. E. Davis | C. E. Davis

[1] I. Aya. Model to calculate mass flow rate and other quantities of two-phase flow in a pipe with a densitometer, a drag disk, and a turbine meter , 1975 .

[2] M. E. Charles,et al. Vertical two-phase flow part I. Flow pattern correlations , 1974 .

[3] S. Silverman. Principles of operation and data reduction techniques for the loft drag disc turbine transducer , 1977 .

[4] K. Aziz,et al. A flow pattern map for gas—liquid flow in horizontal pipes , 1974 .

[5] E. M. Feldman,et al. Semiscale Mod-1 program and system description for the blowdown heat transfer tests (test series 2) , 1975 .