Octupole electrode pattern for tuning forks vibrating at the first overtone mode in quartz-enhanced photoacoustic spectroscopy.

The design, realization, and performance analysis of an octupole electrode pattern configuration intended for the optimization of the charge collection efficiency in quartz tuning forks (QTFs) vibrating at the first overtone in-plane flexural mode is reported. Two QTFs having the same geometry, but differing in the electrode pattern deposited on the QTF prongs, have been realized in order to study the influence of the electrode pattern on the resonance quality factor and electrical resistance. A standard quadrupole pattern (optimized for the fundamental mode) and an octupole electrode layout have been implemented. Although both QTFs show the same resonance quality factor for the first overtone, the octupole pattern provides a reduction of the QTF electrical resistance by more than four times. The sensing performance of the two QTFs has been compared by employing them in a mid-IR quartz-enhanced photoacoustic sensor (QEPAS) system targeting a water absorption line. When operating at the first overtone mode, the QTF with an octupole electrode pattern provides a QEPAS signal more than two times higher with respect to the QTF employing the standard quadrupole configuration.

[1]  Xukun Yin,et al.  Quartz enhanced photoacoustic H2S gas sensor based on a fiber-amplifier source and a custom tuning fork with large prong spacing , 2015 .

[2]  Frank K. Tittel,et al.  Recent advances in quartz enhanced photoacoustic sensing , 2018 .

[3]  Huadan Zheng,et al.  Simultaneous dual-gas QEPAS detection based on a fundamental and overtone combined vibration of quartz tuning fork , 2017 .

[4]  Huadan Zheng,et al.  Double antinode excited quartz-enhanced photoacoustic spectrophone , 2017 .

[5]  A. Kosterev,et al.  Applications of quartz tuning forks in spectroscopic gas sensing , 2005 .

[6]  Frank K. Tittel,et al.  Loss Mechanisms Determining the Quality Factors in Quartz Tuning Forks Vibrating at the Fundamental and First Overtone Modes , 2018, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[7]  F. Ayazi,et al.  An analytical model for support loss in micromachined beam resonators with in-plane flexural vibrations , 2003 .

[8]  Vincenzo Spagnolo,et al.  Analysis of overtone flexural modes operation in quartz-enhanced photoacoustic spectroscopy. , 2016, Optics express.

[9]  A. Kosterev,et al.  Influence of molecular relaxation dynamics on quartz-enhanced photoacoustic detection of CO2 at λ =2 μm , 2006 .

[10]  Huadan Zheng,et al.  Quartz–enhanced photoacoustic spectrophones exploiting custom tuning forks: a review , 2017 .

[11]  Yves Bidaux,et al.  Purely wavelength- and amplitude-modulated quartz-enhanced photoacoustic spectroscopy. , 2016, Optics express.

[12]  J. Fluitman,et al.  Dependence of the quality factor of micromachined silicon beam resonators on pressure and geometry , 1992 .

[13]  Frank K. Tittel,et al.  Octupole electrode pattern for tuning forks vibrating at the first overtone mode in quartz-enhanced photoacoustic spectroscopy , 2019, OPTO.

[14]  Vincenzo Spagnolo,et al.  Fiber-ring laser intracavity QEPAS gas sensor using a 7.2 kHz quartz tuning fork , 2018, Sensors and Actuators B: Chemical.

[15]  Lei Dong,et al.  QEPAS spectrophones: design, optimization, and performance , 2010 .

[16]  Kaikai Xu,et al.  Integrated Silicon Directly Modulated Light Source Using p-Well in Standard CMOS Technology , 2016, IEEE Sensors Journal.

[17]  A. Kosterev,et al.  Impact of humidity on quartz-enhanced photoacoustic spectroscopy based detection of HCN , 2006 .

[18]  N. P. Sanchez,et al.  Atmospheric CH₄ and N₂O measurements near Greater Houston area landfills using a QCL-based QEPAS sensor system during DISCOVER-AQ 2013. , 2014, Optics letters.

[19]  Vincenzo Spagnolo,et al.  Coupling external cavity mid-IR quantum cascade lasers with low loss hollow metallic/dielectric waveguides , 2012 .

[20]  Vincenzo Spagnolo,et al.  Highly sensitive gas leak detector based on a quartz-enhanced photoacoustic SF6 sensor. , 2016, Optics express.

[21]  Frank K. Tittel,et al.  Quartz-Enhanced Photoacoustic Spectroscopy: A Review , 2014, Sensors.

[22]  Simone Borri,et al.  A quartz enhanced photo-acoustic gas sensor based on a custom tuning fork and a terahertz quantum cascade laser. , 2014, The Analyst.

[23]  Frank K. Tittel,et al.  Analysis of the electro-elastic properties of custom quartz tuning forks for optoacoustic gas sensing , 2016 .

[24]  G. Scamarcio,et al.  Quartz-enhanced photoacoustic spectroscopy exploiting tuning fork overtone modes , 2015 .

[25]  OBIAS,et al.  Mid infrared quantum cascade laser operating in pure amplitude modulation for background-free trace gas spectroscopy , 2016 .

[26]  H. Hosaka,et al.  DAMPING CHARACTERISTICS OF BEAM-SHAPED MICRO-OSCILLATORS , 1995 .

[28]  Wei Ren,et al.  Mid-infrared multimode fiber-coupled quantum cascade laser for off-beam quartz-enhanced photoacoustic detection. , 2016, Optics letters.

[29]  Frank K. Tittel,et al.  Improved Tuning Fork for Terahertz Quartz-Enhanced Photoacoustic Spectroscopy , 2016, Sensors.

[30]  Shaun N. Fisher,et al.  Stability of flow and the transition to turbulence around a quartz tuning fork in superfluid He-4 at very low temperatures , 2014 .

[31]  P. Patimisco,et al.  A quartz-enhanced photoacoustic sensor for H2S trace-gas detection at 2.6 μm , 2015 .

[32]  Frank K. Tittel,et al.  Nitrous oxide quartz-enhanced photoacoustic detection employing a broadband distributed-feedback quantum cascade laser array , 2018, Applied Physics Letters.

[33]  Huadan Zheng,et al.  Overtone resonance enhanced single-tube on-beam quartz enhanced photoacoustic spectrophone , 2016 .

[34]  G. Scamarcio,et al.  THz quartz-enhanced photoacoustic sensor for H₂S trace gas detection. , 2015, Optics express.

[35]  Huadan Zheng,et al.  Single-tube on-beam quartz-enhanced photoacoustic spectroscopy. , 2016, Optics letters.

[36]  Frank K. Tittel,et al.  Allan Deviation Plot as a Tool for Quartz-Enhanced Photoacoustic Sensors Noise Analysis , 2016, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.