Fabrication of nickel electrode coatings by combination of atmospheric and suspension plasma spray processes

Abstract Atmospheric plasma spray and suspension plasma spray were presented as two promising methods for manufacturing nickel cathode electrode coatings for alkaline water electrolysis, using micron- and submicron-sized powders, respectively. A combination of both processes was also successfully utilized as a novel method by deposition of a suspension plasma sprayed layer on an atmospheric plasma sprayed one to develop high performance electrodes. The coated electrodes were then characterized in terms of their microstructure, surface topography, wettability and steady state polarization curves. The highest electrocatalytic activity was obtained for an electrode coated by the combined method with the exchange current density and overpotential ( η 250 ) values of 6.2 × 10 − 4  A/cm 2 and − 386 mV, respectively. The high activity of this electrode was attributed to its large specific surface area with a high surface roughness value ( S a  = 14.4 μm) comprising a multiscale micron/submicron-sized surface structure. It is expected that the dual microstructure of this electrode in addition to its superhydrophilic behaviour (with contact angles below 10°) enhances the activity by providing more reaction sites for hydrogen adsorption, promoting the diffusive mass transport of the reactants, and facilitating hydrogen bubble ascension from the pores.

[1]  M. Krane,et al.  Column Formation in Suspension Plasma-Sprayed Coatings and Resultant Thermal Properties , 2011 .

[2]  Bharat Bhushan,et al.  Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction , 2011 .

[3]  C. Persson,et al.  Influence of particle in-flight characteristics on the microstructure of atmospheric plasma sprayed yttria stabilized ZrO2 , 2001 .

[4]  M. Unser,et al.  ow-bond axisymmetric drop shape analysis for surface tension and contact ngle measurements of sessile drops , 2010 .

[5]  Thierry Chartier,et al.  Suspension and solution plasma spraying of finely structured layers: potential application to SOFCs , 2007 .

[6]  Dongke Zhang,et al.  Recent progress in alkaline water electrolysis for hydrogen production and applications , 2010 .

[7]  Pablo Sanchis,et al.  Hydrogen Production From Water Electrolysis: Current Status and Future Trends , 2012, Proceedings of the IEEE.

[8]  A. Lasia,et al.  Hydrogen evolution reaction on Ni-Al-Mo and Ni-Al electrodes prepared by low pressure plasma spraying , 1995 .

[9]  E. Pfender.  Fundamental studies associated with the plasma spray process , 1988 .

[10]  Zhenwei Wang,et al.  Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges , 2007 .

[11]  D. Stojić,et al.  Hydrogen generation from water electrolysis—possibilities of energy saving , 2003 .

[12]  J. Matějíček,et al.  Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia☆ , 1999 .

[13]  S. Kuroda,et al.  Quenching stress in plasma sprayed coatings and its correlation with the deposit microstructure , 1995 .

[14]  G. G. Long,et al.  Influence of Spray Angle on the Pore and Crack Microstructure of Plasma-Sprayed Deposits , 1997 .

[15]  R. Wuthrich,et al.  Electrocatalytically Active Nickel-Based Electrode Coatings Formed by Atmospheric and Suspension Plasma Spraying , 2013, Journal of Thermal Spray Technology.

[16]  Liqun Ma,et al.  Structure, morphology and electrocatalytic characteristics of nickel powders treated by mechanical milling , 2008 .

[17]  C. Marozzi,et al.  Development of electrode morphologies of interest in electrocatalysis: Part 2: Hydrogen evolution reaction on macroporous nickel electrodes , 2001 .

[18]  A. N. Gavrilov,et al.  Influence of structural defects on the electrocatalytic activity of platinum , 2008 .

[19]  Xin-dong Wang,et al.  A novel catalyst layer with hydrophilic―hydrophobic meshwork and pore structure for solid polymer electrolyte water electrolysis , 2011 .

[20]  H. Wendt,et al.  Raney-nickel activated H2-cathodes Part I: Modelling the current/voltage behaviour of flat Raney-nickel coated microporous electrodes , 1992 .

[21]  C. Moreau,et al.  Impact of plasma-sprayed metal particles on hot and cold glass surfaces , 2006 .

[22]  Andrea Kellenberger,et al.  Roughness factor evaluation of thermal arc sprayed skeleton nickel electrodes , 2006 .

[23]  C. Moreau,et al.  Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings , 2007, International Thermal Spray Conference.

[24]  Ghislain Montavon,et al.  Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review , 2011 .

[25]  B. Conway,et al.  Relation of energies and coverages of underpotential and overpotential deposited H at Pt and other metals to the ‘volcano curve’ for cathodic H2 evolution kinetics , 2000 .

[26]  P. Fauchais,et al.  Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions , 2008 .

[27]  Hartmut Wendt,et al.  Materials research and development of electrocatalysts for alkaline water electrolysis , 1989 .

[28]  S. Nam,et al.  Effect of morphology of electrodeposited Ni catalysts on the behavior of bubbles generated during the oxygen evolution reaction in alkaline water electrolysis. , 2013, Chemical communications.

[29]  Derek Pletcher,et al.  Electrocatalysis: present and future , 1984 .

[30]  L. Birry,et al.  Studies of the Hydrogen Evolution Reaction on Raney Nickel—Molybdenum Electrodes , 2004 .