Quantification of Liquid Water Saturation in a PEM Fuel Cell Diffusion Medium Using X-ray Microtomography

Quantification of liquid water saturation distribution in a diffusion medium is critical to establishing a basic understanding of the two-phase flow and flooding occurrence in proton exchange membrane (PEM) fuel cells. We have used X-ray microtomography to obtain high-resolution (10 X 10 X 13.4 μm), three-dimensional images of liquid water distribution in a gas diffusion layer (GDL) during gas purge. We report on temporally resolved liquid saturation profiles across the GDL thickness and demonstrate the feasibility of using X-ray microtomography to quantify liquid water distribution at the component level. The results show that the drying rate decreases exponentially with purge time and no significant liquid water removal takes place after 6 min of purge, at room temperature.

[1]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[2]  Alexander Wokaun,et al.  In situ diagnostic of two-phase flow phenomena in polymer electrolyte fuel cells by neutron imaging: Part A. Experimental, data treatment, and quantification , 2005 .

[3]  Chaoyang Wang,et al.  Visualization of Liquid Water Transport in a PEFC , 2004 .

[4]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[5]  Kirk W Feindel,et al.  The use of 1H NMR microscopy to study proton-exchange membrane fuel cells. , 2006, Chemphyschem : a European journal of chemical physics and physical chemistry.

[6]  Mark L. Rivers,et al.  Using X-ray computed tomography in hydrology: systems, resolutions, and limitations , 2002 .

[7]  D. Wildenschild,et al.  Quantitative Analysis of Flow Processes in a Sand Using Synchrotron‐Based X‐ray Microtomography , 2005, Vadose Zone Journal.

[8]  Feng-Yuan Zhang,et al.  Liquid Water Removal from a Polymer Electrolyte Fuel Cell , 2006 .

[9]  Nicos Martys,et al.  Transport in sandstone: A study based on three dimensional microtomography , 1996 .

[10]  Jack S. Brenizer,et al.  Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging , 2005 .

[11]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[12]  S. R. Stock,et al.  X-ray microtomography of materials , 1999 .

[13]  W. E. Soll,et al.  Pore level imaging of fluid transport using synchrotron X-ray microtomography , 1996 .

[14]  S. Moon,et al.  Behavior of Second-Phase Particles in Al5052 Alloy during Anodizing in a Sulfuric Acid Solution CSLM Observation , 2004 .

[15]  Shohji Tsushima,et al.  Magnetic Resonance Imaging of the Water Distribution within a Polymer Electrolyte Membrane in Fuel Cells , 2004 .

[16]  Shohji Tsushima,et al.  Analysis of Water Transport in PEFCs by Magnetic Resonance Imaging Measurement , 2006 .

[17]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[18]  Alexander Wokaun,et al.  In Situ Investigation of Two‐Phase Flow Patterns in Flow Fields of PEFC’s Using Neutron Radiography , 2002 .

[19]  Derek Elsworth,et al.  Dissolution-induced preferential flow in a limestone fracture. , 2005, Journal of contaminant hydrology.