Analysis of the influence of rubber infill morphology on the mechanical performance of artificial turf surfaces for soccer

Artificial turf is increasingly being used in the construction of football pitches. One of its characteristics is an infill of sand and rubber granules. At present, different materials and layer thicknesses, as well as grain sizes are used for the sand and mainly for the rubber, but they are chosen with little scientific evidence about their influence on the mechanical and biomechanical properties of the pitch. Based on knowledge from materials science, it is reasonable to suggest that grain morphology may have a large influence on pitch performance. This paper presents research conducted to assess the influence of different parameters related to infill grain morphology on the mechanical properties of artificial turf (force reduction (%), vertical deformation (mm) and vertical ball bounce (m)), as well as on their wear with use, measured according to the Fédération Internationale de Football Association (FIFA) procedures. The results show a significant reduction of pitch performance with use and a significant influence of grain morphology in mechanical response of artificial turf with respect to impact forces and ball rebound.

[1]  B M Nigg,et al.  Surface-Related Injuries in Soccer , 1989, Sports medicine.

[2]  James F. Shackelford,et al.  Introduction to materials science for engineers , 1985 .

[3]  Matt Carré,et al.  An examination of the Clegg impact hammer test with regard to the playing performance of synthetic sports surfaces , 2004 .

[4]  Rb Martin.  Problems Associated with Testing the Impact Absorption Properties of Artificial Playing Surfaces , 1990 .

[5]  Martyn R. Shorten,et al.  SHOE-SURFACE TRACTION OF CONVENTIONAL AND IN-FILLED SYNTHETIC TURF FOOTBALL SURFACES , 2002 .

[6]  Lozano,et al.  The effect of shock absorbing sports surfaces in jumping , 1999 .

[7]  Lozano,et al.  The influence of friction on sports surfaces in turning movements , 1999 .

[8]  J. V. Dura,et al.  Testing shock absorbing materials: the application of viscoelastic linear model , 2002 .

[9]  MARK R. VILLWOCK,et al.  FOOTBALL PLAYING SURFACE COMPONENTS MAY AFFECT LOWER EXTREMITY INJURY RISK , 2009 .

[10]  Steve Haake,et al.  The Engineering of Sport , 1998 .

[11]  Baroud,et al.  Energy storage and return in sport surfaces , 1999 .

[12]  Andrew Scott McNitt,et al.  EVALUATION OF THE PLAYING SURFACE HARDNESS OF AN INFILLED SYNTHETIC TURF SYSTEM , 2004 .

[13]  Ga Valiant,et al.  Traction Characteristics of Outsoles for Use on Artificial Playing Surfaces , 1990 .

[14]  M Schootman,et al.  A multivariate risk analysis of selected playing surfaces in the National Football League: 1980 to 1989 , 1992, The American journal of sports medicine.