Simulated and experimental studies for design improvement in riser tubes of modified solar water heater

[1]  Neeraj Sunheriya,et al.  Experimental and computational analysis of riser tubes of modified simple solar water heater with different twisted inserts , 2023, International Journal on Interactive Design and Manufacturing (IJIDeM).

[2]  M. Palaniappan,et al.  Modelling and analysis of an N-DPCM (nano-doped PCM) integrated solar water heater using CFD , 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

[3]  Neeraj Sunheriya,et al.  Review of component wise performance enhancement techniques for simple solar water heater , 2021, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[4]  S. Karmare,et al.  A review on convective heat augmentation techniques in solar thermal collector using nanofluid , 2021, Journal of Thermal Engineering.

[5]  S. K. Dewangan.  Effect of spherical internal surface irregularities (SISIs) on thermohydraulic features of modified SSWH riser tube flow , 2021, International Journal of Energy and Environmental Engineering.

[6]  S. Joshi,et al.  Exergy and thermo-economic analyses of various tubular solar still configurations for improved performance , 2021 .

[7]  Suneet Singh,et al.  A Monte Carlo based approach for exergo-economic modeling of solar water heater , 2020 .

[8]  M. Hammad,et al.  Performance of a new solar water heater design with natural circulation , 2020 .

[9]  S. Iniyan,et al.  Performance of copper oxide/water nanofluid in a flat plate solar water heater under natural and forced circulations , 2015 .

[10]  S. Eiamsa-ard,et al.  Heat transfer enhancement by helical screw tape coupled with rib turbulators , 2014 .

[11]  Sergii Khairnasov,et al.  Aluminum heat pipes applied in solar collectors , 2013 .

[12]  V. Ozceyhan,et al.  Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall , 2012 .

[13]  Damir Dović,et al.  Numerically assisted analysis of flat and corrugated plate solar collectors thermal performances , 2012 .

[14]  B. Ramani,et al.  Performance of a double pass solar air collector , 2010 .

[15]  K. N. Sheeba,et al.  Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes , 2009 .

[16]  Sujoy Kumar Saha,et al.  Thermohydraulic Study of Laminar Swirl Flow Through a Circular Tube Fitted With Twisted Tapes , 2001 .

[17]  J. D. Arsha,et al.  Tapered Twisted Tape Inserts for Enhanced Heat Transfer , 2016 .