Condition monitoring of urban rail transit by local energy harvesting

The goal of this study is to develop a vibration-based electromagnetic energy harvesting prototype that provides power to rail-side monitoring equipment and sensors by collecting wheel-rail vibration energy when the train travels. This technology helps power rail–side equipment in off-grid and remote areas. This article introduces the principle, modeling, and experimental test of the system, including (1) an electromagnetic energy harvesting prototype with DC-DC boost converter and lithium battery charge management function, (2) wireless sensor nodes integrated with accelerometer and temperature/humidity sensor, and (3) a vehicle-track interaction model that considers wheel out-of-roundness. Field test results, power consumption, Littlewood–Paley wavelet transform method, and feasibility analysis are reported. An application case of the technology is introduced: the sensor nodes of the wireless sensor network are powered by the electromagnetic energy harvester and lithium battery with DC-DC boost converter, thereby continuously monitoring the railway track state; based on the Littlewood–Paley wavelet analysis of measured railway track acceleration data, the abnormal signal caused by the wheel out-of-roundness can be detected.

[1]  Nicolo' Zampieri,et al.  Design, Simulation, and Testing of Energy Harvesters With Magnetic Suspensions for the Generation of Electricity From Freight Train Vibrations , 2012 .

[2]  Li-Qun Chen,et al.  Experimental identification of hardening and softening nonlinearity in circular laminated plates , 2017 .

[3]  Anders Rydberg,et al.  Reliability experiments for wireless sensor networks in train environment , 2009, 2009 European Wireless Technology Conference.

[4]  Carl A. Nelson,et al.  Power harvesting systems design for railroad safety , 2014 .

[5]  Victoria J. Hodge,et al.  Wireless Sensor Networks for Condition Monitoring in the Railway Industry: A Survey , 2015, IEEE Transactions on Intelligent Transportation Systems.

[6]  Jian Yang,et al.  Nonlinear characteristic of a circular composite plate energy harvester: experiments and simulations , 2017 .

[7]  Kwang-Ho Lee,et al.  Solar Energy Harvesting from Roadways , 2014 .

[8]  Dan Tan,et al.  Magnetic force analysis and performance of a tri-stable piezoelectric energy harvester under random excitation , 2017 .

[9]  Lei Zuo,et al.  Electromagnetic energy harvesting from train induced railway track vibrations , 2012, Proceedings of 2012 IEEE/ASME 8th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications.

[10]  Yanping Yuan,et al.  A portable high-efficiency electromagnetic energy harvesting system using supercapacitors for renewable energy applications in railroads , 2016 .

[11]  Shaikh Faruque Ali,et al.  Magneto-elastic oscillator: Modeling and analysis with nonlinear magnetic interaction , 2017 .

[12]  Christopher P. L. Barkan,et al.  Smart Sensor System for Monitoring Railcar Braking Systems , 2008 .

[13]  Lennart Elfgren,et al.  Event-based strain monitoring on a railway bridge with a wireless sensor network , 2009 .

[14]  Rong Chen,et al.  A rail-borne piezoelectric transducer for energy harvesting of railway vibration , 2016 .

[15]  Mahir Ülker-Kaustell,et al.  Time-frequency analysis of railway bridge response in forced vibration , 2016 .

[16]  Wanming Zhai,et al.  Vehicle–Track Coupled Dynamics , 2020 .

[17]  Przemysław Kołakowski,et al.  Piezo‐based weigh‐in‐motion system for the railway transport , 2012 .

[18]  Yang Jian,et al.  Vibration energy harvesting system for railroad safety based on running vehicles , 2014 .

[19]  Ping Wang,et al.  Energy harvesting of track-borne transducers by train-induced wind , 2017 .

[20]  Rong Chen,et al.  Design and Verification of a Rail-Borne Energy Harvester for Powering Wireless Sensor Networks in the Railway Industry , 2017, IEEE Transactions on Intelligent Transportation Systems.

[21]  Carl A. Nelson,et al.  Power harvesting for railroad track health monitoring using piezoelectric and inductive devices , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[22]  Qing Lu,et al.  Potentials of Piezoelectric and Thermoelectric Methods on Energy Harvesting Pavements , 2016 .

[23]  Junyi Cao,et al.  Broadband tristable energy harvester: Modeling and experiment verification , 2014 .

[24]  Yuan Wang,et al.  Experimental investigation of non-linear multi-stable electromagnetic-induction energy harvesting mechanism by magnetic levitation oscillation , 2018, Applied Energy.