Simulation of Thermal Load Distribution in Portal Frame Bridges

Uneven exposure to e.g. solar radiation can cause temperature differences between various structural parts of a bridge, which leads to tensile stresses if the parts cannot move freely. In this study, thermal simulations and stress calculations on a model of a portal frame bridge are performed with the aim of evaluating the temperature difference between the bridge parts. Factorial design is used in a parametric study to determine the influence of different factors on the temperature difference and the largest reasonable temperature difference obtainable for the chosen weather data. The study shows that the quasi-permanent temperature difference between parts which is proposed by Eurocode 1 is overestimated, causing tensile stresses in the transverse direction to be exaggerated significantly. Using the design method proposed by Eurocode 1 is therefore likely to overestimate the required reinforcement in crack width limit design, which in turn would lead to unnecessary costs and environmental impacts. The results also indicate that the temperature distribution within the bridge is different from what is given in Eurocode load cases, and consequently, the largest tensile stresses appear in other areas of the bridge. A simplified temperature distribution is therefore investigated and shown to give similar results as the detailed thermal simulations.

[1]  Russell R. Barton,et al.  A review on design, modeling and applications of computer experiments , 2006 .

[2]  A. Rosenfeld,et al.  Practical issues for using solar-reflective materials to mitigate urban heat islands , 1998 .

[3]  Jesper Arfvidsson,et al.  Fukthandbok: Praktik och teori , 2017 .

[4]  Gao-xin Wang,et al.  Long-Term Temperature Monitoring and Statistical Analysis on the Flat Steel-Box Girder of Sutong Bridge , 2014 .

[5]  Michael D. Gilchrist,et al.  Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading , 2015 .

[6]  Cyril Douthe,et al.  A preliminary design formula for the strength of stiffened curved panels by design of experiment method , 2014 .

[7]  D. Hillel.  Introduction to environmental soil physics , 1982 .

[8]  Abbas S. Milani,et al.  Cyclic response sensitivity of post-tensioned steel connections using sequential fractional factorial design , 2015 .

[9]  Carlos Graciano,et al.  Elastic buckling of longitudinally stiffened patch loaded plate girders using factorial design , 2014 .

[10]  Johan Sundberg.  Termiska egenskaper i jord och berg , 1991 .

[11]  Alejandro Pérez Caldentey,et al.  Experimental Study of Thermal Actions on a Solid Slab Concrete Deck Bridge and Comparison with Eurocode 1 , 2014 .

[12]  Raid Karoumi,et al.  Statistical screening of individual and joint effect of several modelling factors on the dynamic finite element response of a railway bridge , 2012 .

[13]  J. S. Hunter,et al.  Statistics for Experimenters: Design, Innovation, and Discovery , 2006 .

[14]  James M. W. Brownjohn,et al.  Temperature analysis of a long-span suspension bridge based on field monitoring and numerical simulation , 2016 .

[15]  S. Thelandersson,et al.  Transverse thermal stresses in concrete box cross‐sections due to climatic exposure , 2012 .

[16]  Raid Karoumi,et al.  Modelling of Climatic Thermal Actions in Hollow Concrete Box Cross-Sections , 2011 .

[17]  F. Kreith,et al.  Principles of heat transfer , 1962 .

[18]  H. Gulvanessian,et al.  EN1990 Eurocode—Basis of structural design , 2001 .

[19]  G. Martínez,et al.  Impact response of expanded metal tubes: A numerical investigation , 2016 .

[20]  Yi Xiang Fu.  Research on Temperature Effects of the Pre-Stressed Concrete Box Girder Bridge , 2015 .

[21]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[22]  Paul J. Barr,et al.  Temperature Effects on a Box-Girder Integral-Abutment Bridge , 2014 .

[23]  Oskar Larsson.  Modeling of Temperature Profiles in a Concrete Slab under Climatic Exposure , 2009 .

[24]  Oskar Larsson,et al.  Climate Related Thermal Actions for Reliable Design of Concrete Structures , 2012 .