Structural optimal hybrid control strategies employing dynamic dual units: inerter and spring

[1]  Daniel Ambrosini,et al.  Improvement of tuned mass damper by using rotational inertia through tuned viscous mass damper , 2013 .

[2]  Agathoklis Giaralis,et al.  Optimal design of a novel tuned mass-damper–inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems , 2014 .

[3]  Antony Darby,et al.  An experimental investigation into the use of a buffered impact damper , 2006 .

[4]  M. De Angelis,et al.  Optimal design and performance evaluation of systems with Tuned Mass Damper Inerter (TMDI) , 2017 .

[5]  Michael C. Constantinou,et al.  Seismic response of structures with supplemental damping , 1993 .

[6]  James T. P. Yao,et al.  CONCEPT OF STRUCTURAL CONTROL , 1972 .

[7]  Pradipta Banerji,et al.  Tuned liquid dampers for controlling earthquake response of structures , 2000 .

[8]  T. T. Soong,et al.  Seismic Design of Viscoelastic Dampers for Structural Applications , 1992 .

[9]  Xugang Hua,et al.  Design and Evaluation of Tuned Inerter-Based Dampers for the Seismic Control of MDOF Structures , 2016 .

[10]  Billie F. Spencer,et al.  Inertial mass damper for mitigating cable vibration , 2017 .

[11]  D. De Domenico,et al.  Improving the dynamic performance of base‐isolated structures via tuned mass damper and inerter devices: A comparative study , 2018, Structural Control and Health Monitoring.

[12]  Mamoru Iwata,et al.  Buckling‐restrained brace using steel mortar planks; performance evaluation as a hysteretic damper , 2006 .

[13]  Lin Chen,et al.  Cables interconnected with tuned inerter damper for vibration mitigation , 2017 .

[14]  A. Kiureghian,et al.  Response spectrum method for multi‐support seismic excitations , 1992 .

[15]  Kuo-Chun Chang,et al.  Simplified analysis of mid‐story seismically isolated buildings , 2011 .

[16]  M. Shinozuka,et al.  Simulation of Stochastic Processes by Spectral Representation , 1991 .

[17]  David J. Wagg,et al.  Using an inerter‐based device for structural vibration suppression , 2014 .

[18]  Kohju Ikago,et al.  Seismic control of single‐degree‐of‐freedom structure using tuned viscous mass damper , 2012 .

[19]  David J. Wagg,et al.  Vibration suppression of cables using tuned inerter dampers , 2016 .

[20]  T. T. Soong,et al.  Parametric study and simplified design of tuned mass dampers , 1998 .

[21]  T. T. Soong,et al.  STRUCTURAL CONTROL: PAST, PRESENT, AND FUTURE , 1997 .

[22]  T. T. Soong,et al.  Supplemental energy dissipation: state-of-the-art and state-of-the- practice , 2002 .

[23]  Robert E. Bachman,et al.  The Use of the Energy Dissipating Restraint for Seismic Hazard Mitigation , 1993 .

[24]  Cem Topkaya,et al.  An experimental study on steel‐encased buckling‐restrained brace hysteretic dampers , 2009 .

[25]  Michael Z. Q. Chen,et al.  Performance evaluation for inerter-based dynamic vibration absorbers , 2015 .

[26]  Nicos Makris,et al.  Seismic protection of structures with supplemental rotational inertia , 2016 .

[27]  Malcolm C. Smith.  Synthesis of mechanical networks: the inerter , 2002, IEEE Trans. Autom. Control..

[28]  Hirokazu Iemura,et al.  Application of angular‐mass dampers to base‐isolated benchmark building , 2008 .

[29]  Dong Xu,et al.  Static structural system identification for beam‐like structures using compatibility conditions , 2018 .

[30]  Michael C. Constantinou,et al.  Negative stiffness device for seismic protection of structures: An analytical and experimental study , 2011 .

[31]  Gangbing Song,et al.  Vibration Control of a Pipeline Structure Using Pounding Tuned Mass Damper , 2016 .

[32]  Luyu Li,et al.  Effect of inerter for seismic mitigation comparing with base isolation , 2019, Structural Control and Health Monitoring.

[33]  Luyu Li,et al.  Seismic Assessment and Optimal Design for Structures with Clutching Inerter Dampers , 2020 .

[34]  Meng Wang,et al.  Displacement reduction effect and simplified evaluation method for SDOF systems using a clutching inerter damper , 2018 .

[35]  Michael C. Constantinou,et al.  Adaptive Negative Stiffness: New Structural Modification Approach for Seismic Protection , 2013 .

[36]  Izuru Takewaki,et al.  Fundamental mechanism of earthquake response reduction in building structures with inertial dampers , 2012 .

[37]  Liang Hu,et al.  Analytical solution of seismic response of base‐isolated structure with supplemental inerter , 2019, Earthquake Engineering & Structural Dynamics.

[38]  Michael C. Constantinou,et al.  Effect of viscous damping devices on the response of seismically isolated structures , 2015 .

[39]  James M. Kelly,et al.  Earthquake-Resistant Design with Rubber , 1993 .

[40]  Robert Levy,et al.  Seismic design methodology for friction damped braced frames , 2000 .