Thermocycling effect on mechanical and tribological characterization of two indirect dental restorative materials

[1]  D. Watts,et al.  Shrinkage strain – Rates study of dental composites based on (BisGMA/TEGDMA) monomers , 2017 .

[2]  Estevam Barbosa de Las Casas,et al.  A FEM-based study on the influence of skewness and kurtosis surface texture parameters in human dental occlusal contact , 2016, J. Comput. Appl. Math..

[3]  L. Correr-Sobrinho,et al.  Influence of irradiance on Knoop hardness, degree of conversion, and polymerization shrinkage of nanofilled and microhybrid composite resins. , 2016, General dentistry.

[4]  Sebastian Stach,et al.  Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach , 2015 .

[5]  Julian D Satterthwaite,et al.  Post-irradiation hardness development, chemical softening, and thermal stability of bulk-fill and conventional resin-composites. , 2015, Journal of dentistry.

[6]  Y. Momoi,et al.  Polymerization stress of dental resin composite continues to develop 12 hours after irradiation. , 2015, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].

[7]  A. Ramalho,et al.  Mechanical and wear behaviours of nano and microfilled polymeric composite: effect of filler fraction and size , 2014 .

[8]  R. Belli,et al.  Are linear elastic material properties relevant predictors of the cyclic fatigue resistance of dental resin composites? , 2014, Dental materials : official publication of the Academy of Dental Materials.

[9]  D. Zaytsev,et al.  Deformation behavior of human enamel and dentin-enamel junction under compression. , 2014, Materials science & engineering. C, Materials for biological applications.

[10]  A. Subbiya,et al.  Polymerisation Shrinkage in Resin Composites-A Review , 2014 .

[11]  A. Monaco,et al.  Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review. , 2014, Journal of the mechanical behavior of biomedical materials.

[12]  M. Demirci,et al.  The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. , 2013, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].

[13]  J. Sukumaran,et al.  Scratch evaluation on a high performance polymer , 2013 .

[14]  V. Tagliaferri,et al.  Progressive and constant load scratch testing of single- and multi-layered composite coatings , 2013 .

[15]  Amilcar Ramalho,et al.  Effects of temperature on mechanical and tribological properties of dental restorative composite materials , 2013 .

[16]  P. Lambrechts,et al.  Correlating in vitro scratch test with in vivo contact free occlusal area wear of contemporary dental composites. , 2013, Dental Materials.

[17]  F. Trovalusci,et al.  Visual appearance and scratch resistance of high performance thermoset and thermoplastic powder coatings , 2013 .

[18]  R. Akhtar,et al.  Nanomechanical properties of dental resin-composites. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[19]  M. Cho,et al.  Elastic stiffness and filler size effect of covalently grafted nanosilica polyimide composites: molecular dynamics study. , 2012, ACS applied materials & interfaces.

[20]  D. Mohamad,et al.  Water sorption characteristics of restorative dental composites immersed in acidic drinks. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[21]  Jože Vižintin,et al.  Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces , 2012 .

[22]  Linmao Qian,et al.  Investigation on the microtribological behaviour of human tooth enamel by nanoscratch , 2011 .

[23]  D. Klaus,et al.  Standardization of a Volumetric Displacement Measurement for Two-Body Abrasion Scratch Test Data Analysis , 2011 .

[24]  R. Moraes,et al.  Preparation and Evaluation of Dental Resin Luting Agents with Increasing Content of Bisphenol-A Ethoxylated Dimethacrylate , 2010, Journal of biomaterials applications.

[25]  D. Watts,et al.  Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[26]  R. V. Mesquita,et al.  Influence of temperature on the visco-elastic properties of direct and indirect dental composite resins. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[27]  P. Marquis,et al.  Water uptake and strength characteristics of a nanofilled resin-based composite. , 2008, Journal of dentistry.

[28]  S. Rüttermann,et al.  Polymerization shrinkage and hygroscopic expansion of contemporary posterior resin-based filling materials--a comparative study. , 2007, Journal of dentistry.

[29]  G. Zappini,et al.  The relationship between physical parameters and wear of dental composites , 2007 .

[30]  D. Bikiaris,et al.  Aging studies of light cured dimethacrylate-based dental resins and a resin composite in water or ethanol/water. , 2007, Dental materials : official publication of the Academy of Dental Materials.

[31]  I. E. Ruyter,et al.  Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers. , 2007, Dental materials : official publication of the Academy of Dental Materials.

[32]  J. Devaux,et al.  Characterization of nanofilled compared to universal and microfilled composites. , 2007, Dental materials : official publication of the Academy of Dental Materials.

[33]  J. Ferracane.  Hygroscopic and hydrolytic effects in dental polymer networks. , 2006, Dental materials : official publication of the Academy of Dental Materials.

[34]  R. V. Mesquita,et al.  Dynamic visco-elastic properties of dental composite resins. , 2006, Dental materials : official publication of the Academy of Dental Materials.

[35]  L. Gallo,et al.  Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite. , 2005, Dental materials : official publication of the Academy of Dental Materials.

[36]  José Carlos Pereira,et al.  Influence of pH environment on polymer based dental material properties. , 2005, Journal of dentistry.

[37]  L. Musanje,et al.  Effects of strain rate and temperature on the mechanical properties of resin composites. , 2004, Dental materials : official publication of the Academy of Dental Materials.

[38]  V. Jardret,et al.  Viscoelastic effects on the scratch resistance of polymers: relationship between mechanical properties and scratch properties at various temperatures , 2003 .

[39]  S. Y. Lee,et al.  Flexural behaviour of post-cured composites at oral-simulating temperatures. , 2001, Journal of oral rehabilitation.

[40]  P. Bush,et al.  A comparison of the wear resistance and hardness of indirect composite resins. , 2001, The Journal of prosthetic dentistry.

[41]  S. Karlsson,et al.  Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials. , 2001, Journal of dentistry.

[42]  N. Sarkar,et al.  Simulation of in vivo degradation of dental composites , 1999 .

[43]  B. Darvell,et al.  Thermal cycling procedures for laboratory testing of dental restorations. , 1999, Journal of dentistry.

[44]  J. Ferracane,et al.  In vitro aging of dental composites in water--effect of degree of conversion, filler volume, and filler/matrix coupling. , 1998, Journal of biomedical materials research.

[45]  E Romberg,et al.  Indentation Damage and Mechanical Properties of Human Enamel and Dentin , 1998, Journal of dental research.

[46]  E Asmussen,et al.  Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. , 1998, Dental materials : official publication of the Academy of Dental Materials.

[47]  J. Ferracane,et al.  Fracture Toughness of Experimental Dental Composites Aged in Ethanol , 1995, Journal of dental research.

[48]  J K Harcourt,et al.  Fracture toughness of water-aged resin composite restorative materials. , 1995, Dental materials : official publication of the Academy of Dental Materials.

[49]  A. Peutzfeldt,et al.  Modulus of resilience as predictor for clinical wear of restorative resins. , 1992, Dental materials : official publication of the Academy of Dental Materials.

[50]  E. Kao.  Influence of food-simulating solvents on resin composites and glass-ionomer restorative cement. , 1989, Dental materials : official publication of the Academy of Dental Materials.

[51]  D. Williams,et al.  The Effect of Environmental Aging on the Fracture Toughness of Dental Composites , 1987, Journal of dental research.

[52]  S. Kalachandra,et al.  Water sorption of polymethacrylate networks: bis-GMA/TEGDM copolymers. , 1987, Journal of biomedical materials research.

[53]  I. E. Ruyter,et al.  Composites for use in posterior teeth: composition and conversion. , 1987, Journal of biomedical materials research.

[54]  P. Lambrechts,et al.  The Impact of Composite Structure on Its Elastic Response , 1986, Journal of dental research.

[55]  Geometrical product specifications (GPS). Surface texture: Profile , 2022 .