Industry sector analysis for the application of additive manufacturing in smart and distributed manufacturing systems

[1]  Mariette DiChristina,et al.  Top 10 Emerging Technologies of 2017. , 2017, Scientific American.

[2]  N. Shamsaei,et al.  Quality part production via multi-laser additive manufacturing , 2017 .

[3]  Chee How Wong,et al.  Practical support structures for selective laser melting , 2016 .

[4]  Yingguang Li,et al.  Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing , 2016 .

[5]  Erwin Rauch,et al.  Collaborative Cloud Manufacturing: Design of Business Model Innovations Enabled by Cyberphysical Systems in Distributed Manufacturing Systems , 2016 .

[6]  Erwin Rauch,et al.  Sustainable production in emerging markets through Distributed Manufacturing Systems (DMS) , 2016 .

[7]  Adam T. Clare,et al.  Spatially resolved acoustic spectroscopy for selective laser melting , 2016 .

[8]  D. Gu,et al.  Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy , 2016 .

[9]  Ping Hu,et al.  Isotropic and anisotropic elasticity and yielding of 3D printed material , 2016 .

[10]  Sofiane Guessasma,et al.  Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective , 2016 .

[11]  Frederik Vogeler,et al.  Extrusion-based additive manufacturing of ZrO2 using photoinitiated polymerization , 2016 .

[12]  Markus Dickerhof,et al.  A modular flexible scalable and reconfigurable system for manufacturing of Microsystems based on additive manufacturing and e-printing , 2016 .

[13]  James M. Fraser,et al.  In situ morphology-based defect detection of selective laser melting through inline coherent imaging , 2016 .

[14]  Alain Bernard,et al.  Two-dimensional placement optimization for multi-parts production in additive manufacturing , 2016 .

[15]  Vimal Dhokia,et al.  Investigation of part distortions as a result of hybrid manufacturing , 2016 .

[16]  Vimal Dhokia,et al.  Hybrid additive and subtractive machine tools – Research and industrial developments , 2016 .

[17]  Mehran Solati-Hashjin,et al.  Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes , 2016 .

[18]  M. Matsumoto,et al.  Trends and research challenges in remanufacturing , 2016 .

[19]  Joshua M. Pearce,et al.  In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing , 2015 .

[20]  Wei Zhu,et al.  Material optimization and post-processing of sand moulds manufactured by the selective laser sintering of binder-coated Al2O3 sands , 2015 .

[21]  Sunil C. Joshi,et al.  3D printing in aerospace and its long-term sustainability , 2015 .

[22]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[23]  J. Dubois,et al.  Additive manufacturing of lightweight, fully Al-based components using quasicrystals , 2014 .

[24]  Ryan B. Wicker,et al.  Laser curing of silver-based conductive inks for in situ 3D structural electronics fabrication in stereolithography , 2014 .

[25]  Jean-Yves Hascoët,et al.  A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process , 2014 .

[26]  Sung-Hoon Ahn,et al.  A comparison of energy consumption in bulk forming, subtractive, and additive processes: Review and case study , 2014 .

[27]  Seung Ki Moon,et al.  Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures , 2014, International Journal of Precision Engineering and Manufacturing-Green Technology.

[28]  David Z. Zhang,et al.  Additive manufacturing: A framework for implementation , 2014 .

[29]  G. Klein,et al.  3D printing and neurosurgery--ready for prime time? , 2013, World neurosurgery.

[30]  Dazhong Wu,et al.  Cloud Manufacturing: Drivers, Current Status, and Future Trends , 2013 .

[31]  Vamsi K. Yadavalli,et al.  Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices , 2013 .

[32]  H. Maier,et al.  On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance , 2013 .

[33]  Zeki Ayağ,et al.  Evaluating machine tool alternatives through modified TOPSIS and alpha-cut based fuzzy ANP , 2012 .

[34]  Cengiz Kahraman,et al.  Multi-attribute comparison of catering service companies using fuzzy AHP: The case of Turkey , 2004 .

[35]  R. Sedhom.  3D Printing and its Effect on the Fashion Industry: It's More Than Just About Intellectual Property , 2015 .

[36]  P. Bártolo,et al.  Micro Additive manufacturing using ulra short laser pulses , 2015 .