LSGMCF dense diffusion barrier preparation and electrical characteristics for limiting current oxygen sensor
暂无分享,去创建一个
Xudong Luo | Xiaofang Zhang | Xiangnan Wang | Jiegang You | Jinlian Li | Wen-rong Tan | Yakai Wang | Fuyao Wang
[1] Jianxu Ding,et al. A limiting current oxygen sensor with (CuO)0.1(8YSZ)0.9 dense diffusion barrier , 2022, Physica B: Condensed Matter.
[2] S. Pakhira,et al. Recent advancements of two-dimensional transition metal dichalcogenides and their applications in electrocatalysis and energy storage , 2021, Emergent Materials.
[3] Zhanhu Guo,et al. Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects , 2021 .
[4] Zhanhu Guo,et al. Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption , 2021, Advanced Composites and Hybrid Materials.
[5] L. Trabzon,et al. Affinity biosensors developed with quantum dots in microfluidic systems , 2021, Emergent Materials.
[6] I. Kanno,et al. Limiting current type yttria-stabilized zirconia thin-film oxygen sensor with spiral Ta2O5 gas diffusion layer , 2021 .
[7] K. Fujii,et al. Dion–Jacobson-type oxide-ion conductor CsLa2Ti2NbO10−δ without phase transitions , 2020 .
[8] Di Liu,et al. Template-directed synthesis of mesoporous TiO2 materials for energy conversion and storage , 2020, Emergent Materials.
[9] H. Garmestani,et al. Conductivity and mixed conductivity of a novel dense diffusion barrier and the sensing properties of limiting current oxygen sensors. , 2020, Dalton transactions.
[10] Hongming Yuan,et al. A dense diffusion barrier limiting current oxygen sensor for detecting full concentration range , 2020 .
[11] Maoyi Yi,et al. Conductivity behavior of Fe, Ti singly and doubly doped CaO-ZrO2 , 2019, Journal of Alloys and Compounds.
[12] Fen Zhou,et al. Limiting-current oxygen sensor with LaNi0.6Fe0.4O3− dense diffusion barrier and Ce0.8Gd0.15Ca0.05O2− electrolyte , 2019, Ceramics International.
[13] Jingkun Yu,et al. A new application of Ce Zr1-O2 as dense diffusion barrier in limiting current oxygen sensor , 2019, Sensors and Actuators B: Chemical.
[14] Jingkun Yu,et al. A limiting current oxygen sensor prepared by a co-pressing and co-sintering technique , 2018, Sensors and Actuators B: Chemical.
[15] Jingkun Yu,et al. The effect of Fe doping on the electrical conductivities of CaZrO3 and its sensing performance in limiting current oxygen sensor , 2018, Journal of Alloys and Compounds.
[16] Tao Liu,et al. A novel limiting current oxygen sensor prepared by slurry spin coating , 2018, Sensors and Actuators B: Chemical.
[17] Jingkun Yu,et al. Preparation and electrical property of CaZr0.7M0.3O3 (M = Fe, Cr and Co) dense diffusion barrier for application in limiting current oxygen sensor , 2018, Sensors and Actuators B: Chemical.
[18] Tao Liu,et al. A limiting current oxygen sensor based on FeO1.5 doped LDC as dense diffusion barrier , 2018 .
[19] Yongjia Zhang,et al. Effect of film thickness on the electrical and ethanol sensing characteristics of LaFeO3 nanoparticle-based thick film sensors , 2018 .
[20] Jingkun Yu,et al. Crystal structure, microstructure, thermal expansion and electrical conductivity of CeO2–ZrO2 solid solution , 2017 .
[21] Jingkun Yu,et al. Properties of limiting current oxygen sensor with La0.8Sr0.2Ga0.8Mg0.2O3−δ solid electrolyte and La0.8Sr0.2(Ga0.8Mg0.2)1−xCrxO3−δ dense diffusion barrier , 2017 .
[22] Jingkun Yu,et al. Limiting current oxygen sensor based on La0.8Sr0.2Ga0.8Mg0.2O3−δ as both dense diffusion barrier and solid electrolyte , 2017 .
[23] Tao Liu,et al. A Limiting Current Oxygen Sensor Based on LSGM as a Solid Electrolyte and LSGMN (N = Fe, Co) as a Dense Diffusion Barrier , 2016, Journal of Materials Engineering and Performance.
[24] K. Kravchyk,et al. Ionic and electronic conductivity of 3 mol% Fe2O3-substituted cubic yttria-stabilized ZrO2 (YSZ) and scandia-stabilized ZrO2 (ScSZ) , 2014 .
[25] Yu Lei,et al. Solid-state gas sensors for high temperature applications – a review , 2014 .
[26] Xiaojing Wang,et al. A high performance limiting current oxygen sensor with Ce0.8Sm0.2O1.9 electrolyte and La0.8Sr0.2Co0.8Fe0.2O3 diffusion barrier , 2013 .
[27] B. Li,et al. Influence of Thickness on Oxide Ionic Conductivity in Sm3+ and Nd3+ Co-Doped CeO2 Electrolyte , 2010 .
[28] Keiji Yashiro,et al. Effect of Y2O3 addition on the conductivity and elastic modulus of (CeO2)1 − x(YO1.5)x , 2009 .
[29] K. Murata,et al. An oxygen permeable membrane La0.8Sr0.2(Ga0.8Mg0.2)1 − xCrxO3 − δ for a reduced atmosphere , 2009 .
[30] Xiaoliang Zhou,et al. Preparation and electrical behavior study of the ceramic interconnect La0.7Ca0.3CrO3-δ with CeO2-based electrolyte Ce0.8Sm0.2O1.9 , 2009 .
[31] J. Fergus. Perovskite oxides for semiconductor-based gas sensors , 2007 .
[32] Ghenadii Korotcenkov,et al. Practical aspects in design of one-electrode semiconductor gas sensors: Status report , 2007 .
[33] J. Goodenough,et al. LSGM-Based Solid Oxide Fuel Cell with 1.4 W/cm2 Power Density and 30 Day Long-Term Stability , 2005 .
[34] Yue Zhang,et al. Study of YSZ Amperometric Oxygen Sensor with a Dense Barrier Layer , 2004 .
[35] H. Matsumoto,et al. Electrical properties and defect structure of niobia-doped ceria , 2004 .
[36] Rangachary Mukundan,et al. Electrochemical Sensors for Energy and Transportation , 2004 .
[37] M. Mori,et al. Evaluation of Ni and Ti-doped Y2O3 stabilized ZrO2 cermet as an anode in high-temperature solid oxide fuel cells , 2003 .
[38] Ellen Ivers-Tiffée,et al. Principles of solid state oxygen sensors for lean combustion gas control , 2001 .
[39] Meilin Liu,et al. A new type of amperometric oxygen sensor based on a mixed-conducting composite membrane , 2001 .
[40] T. Ishihara,et al. Mixed electronic–oxide ionic conductivity and oxygen permeating property of Fe-, Co- or Ni-doped LaGaO3 perovskite oxide , 2000 .
[41] N. Sakai,et al. Chemical stability of the La0.9Sr0.1Ga0.8Mg0.2O2.85 electrolyte in a reducing atmosphere , 1999 .
[42] H. Ullmann,et al. Transition metal doped lanthanum gallates , 1999 .
[43] Meilin Liu,et al. Study of transition metal oxide doped LaGaO3 as electrode materials for LSGM-based solid oxide fuel cells , 1998 .
[44] Eric L. Brosha,et al. Dense diffusion barrier limiting current oxygen sensors , 1998 .
[45] Tatsumi Ishihara,et al. Doped LaGaO3 Perovskite Type Oxide as a New Oxide Ionic Conductor , 1994 .
[46] A. Asada,et al. Planar type of limiting current oxygen sensor , 1993 .