Technical Characteristics and Wear-Resistant Mechanism of Nano Coatings: A Review

Nano-coating has been a hot issue in recent years. It has good volume effect and surface effect, and can effectively improve the mechanical properties, corrosion resistance and wear resistance of the coatings. It is important to improve the wear resistance of the material surface. The successful preparation of nano-coatings directly affects the application of nano-coatings. Firstly, the preparation methods of conventional surface coatings such as chemical vapor deposition and physical vapor deposition, as well as the newly developed surface coating preparation methods such as sol-gel method, laser cladding and thermal spraying are reviewed in detail. The preparation principle, advantages and disadvantages and the application of each preparation method in nano-coating are analyzed and summarized. Secondly, the types of nano-coating materials are summarized and analyzed by inorganic/inorganic nanomaterial coatings and organic/inorganic nanomaterial coatings, and their research progress is summarized. Finally, the wear-resistant mechanism of nano-coatings is revealed from three aspects: grain refinement, phase transformation toughening mechanism and nano-effects. The application prospects of nano-coatings and the development potential combined with 3D technology are prospected.

[1]  Honggang Wang,et al.  One-pot synthesis and self-assembly of anti-wear octadecyltrichlorosilane/silica nanoparticles composite films on silicon , 2020 .

[2]  A. Atta,et al.  Superhydrophobic organic and inorganic clay nanocomposites for epoxy steel coatings , 2020, Focus on Powder Coatings.

[3]  S. Veldhuis,et al.  An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel , 2020 .

[4]  Nanocrystalline Materials , 2020 .

[5]  M. Mozammel,et al.  Efficient one-step fabrication of superhydrophobic nano-TiO2/TMPSi ceramic composite coating with enhanced corrosion resistance on 316L , 2020 .

[6]  F. Lu,et al.  Microstructure, wear, and oxidation resistance of nanostructured carbide-strengthened cobalt-based composite coatings on Invar alloys by laser cladding , 2020 .

[7]  Jiegang Mou,et al.  Research Progress on the Collaborative Drag Reduction Effect of Polymers and Surfactants , 2020, Materials.

[8]  J. Velasco,et al.  Effects of Graphene Nanoplatelets and Cellular Structure on the Thermal Conductivity of Polysulfone Nanocomposite Foams , 2019, Polymers.

[9]  T. Yin,et al.  Building the silicon carbide nanowire network on the surface of carbon fibers: Enhanced interfacial adhesion and high-performance wear resistance , 2019 .

[10]  H. Liao,et al.  Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review , 2019, Surface and Coatings Technology.

[11]  Hua Tang,et al.  Enhanced wettability and wear resistance on TiO2/PDA thin films prepared by sol-gel dip coating , 2019, Surface and Coatings Technology.

[12]  E. Pavlidou,et al.  Influence of microstructure flaws on the tribological performance of Cr-based thermal-sprayed ceramic coatings , 2019, Ceramics International.

[13]  P. Weiss,et al.  Organic-Inorganic Hybrid Pillarene-Based Nanomaterial for Label-Free Sensing and Catalysis , 2019, Matter.

[14]  Tiangang Zhang,et al.  Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings , 2019, Optics and Lasers in Engineering.

[15]  S. Palanisamy,et al.  Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel , 2019, Surface and Coatings Technology.

[16]  H. Myalska,et al.  Tribological behavior of WC-Co HVAF-sprayed composite coatings modified by nano-sized TiC addition , 2019, Surface and Coatings Technology.

[17]  R. Ashiri,et al.  Electron beam assisted physical vapor deposition of very hard TiCN coating with nanoscale characters , 2019, Ceramics International.

[18]  C. Langlade,et al.  Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings , 2019, Surface and Coatings Technology.

[19]  Š. Houdková,et al.  Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes , 2019, Surface and Coatings Technology.

[20]  N. Arunachalam,et al.  Wear performance of nano-engineered boron doped graded layer CVD diamond coated cutting tool for machining of Al-SiC MMC , 2019, Wear.

[21]  Zhong Yang,et al.  Simultaneous increase of friction coefficient and wear resistance through HVOF sprayed WC-(nano WC-Co) , 2019, Surface and Coatings Technology.

[22]  N. Parvin,et al.  Effect of microstructure and mechanical properties on wear behavior of plasma-sprayed Cr2O3-YSZ-SiC coatings , 2019, Ceramics International.

[23]  Zhuangzhi Sun,et al.  High performance, flexible and renewable nano-biocomposite artificial muscle based on mesoporous cellulose/ ionic liquid electrolyte membrane , 2019, Sensors and Actuators B: Chemical.

[24]  Wei Sun,et al.  Small punch creep testing of thermally sprayed Stellite 6 coating: A comparative study of as-received vs post-heat treatment , 2019, Materials Science and Engineering: A.

[25]  Yue Zhao,et al.  Microstructure and tribological properties of laser cladded self-lubricating nickel-base composite coatings containing nano-Cu and h-BN solid lubricants , 2019, Surface and Coatings Technology.

[26]  W. Cong,et al.  Laser Cladding of Ti-Based Ceramic Coatings on Ti6Al4V Alloy: Effects of CeO2 Nanoparticles Additive on Wear Performance , 2019, Coatings.

[27]  Zhiyan Zhang,et al.  Study on the laser cladding of FeCrNi coating , 2019, Optik.

[28]  Sang J. Chung,et al.  Biogenic nanomaterials: Synthesis, characterization, growth mechanism, and biomedical applications. , 2019, Journal of microbiological methods.

[29]  C. Kiminami,et al.  Corrosion and wear properties of FeCrMnCoSi HVOF coatings , 2019, Surface and Coatings Technology.

[30]  A. Khadom,et al.  Corrosion protection of mild steel in different aqueous media via epoxy/nanomaterial coating: preparation, characterization and mathematical views , 2019, Journal of Materials Research and Technology.

[31]  A. Amanov.  Wear resistance and adhesive failure of thermal spray ceramic coatings deposited onto graphite in response to ultrasonic nanocrystal surface modification technique , 2017, Applied Surface Science.

[32]  Sen Yang,et al.  Microstructure and properties of Cu/TiB2 wear resistance composite coating on H13 steel prepared by in-situ laser cladding , 2018, Optics & Laser Technology.

[33]  Seokhee Lee,et al.  Stimuli-responsive switchable organic-inorganic nanocomposite materials , 2018, Nano Today.

[34]  P. Song,et al.  Enhanced interface adhesion by in-situ oxidation within metal-ceramic coatings , 2018, Ceramics International.

[35]  Xiubing Liang,et al.  Influence of ceramic particles and process parameters on residual stress of flame-sprayed Fe-based coatings , 2018, Surface and Coatings Technology.

[36]  S. Palanisamy,et al.  A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder , 2018, Materials Letters.

[37]  Yan-chun Dong,et al.  Effects of treatment process and nano-additives on the microstructure and properties of Al2O3-TiO2 nanocomposite powders used for plasma spraying , 2018, Powder Technology.

[38]  Yu-Lin Shen,et al.  Parametric computational analysis of indentation-induced shear band formation in metal-ceramic multilayer coatings , 2018, Surface and Coatings Technology.

[39]  Tie-hu Li,et al.  Two-step method to deposit ZrO2 coating on carbon fiber: Preparation, characterization, and performance in SiC composites , 2018, Ceramics International.

[40]  L. Gou,et al.  Comparative analysis of graphene grown on copper and nickel sheet by microwave plasma chemical vapor deposition , 2018, Vacuum.

[41]  Z. Qi,et al.  Microstructure and properties of composite coatings prepared by plasma spraying ZrO2-B2O3-Al composite powders , 2018 .

[42]  F. Ye,et al.  Sliding wear behavior of HVOF sprayed WC-(nano-WC-Co) coating at elevated temperatures , 2018 .

[43]  Kosuke Yanagisawa,et al.  Influence of the Al content on mechanical properties of CVD aluminum titanium nitride coatings , 2018 .

[44]  Yuhan Sun,et al.  Recent advances in the investigation of nanoeffects of Fischer-Tropsch catalysts , 2017, Catalysis Today.

[45]  J. Míguez,et al.  On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications , 2018 .

[46]  V. Reghu,et al.  Challenges in Plasma Spraying of 8%Y2O3-ZrO2 Thermal Barrier Coatings on Al Alloy Automotive Piston and Influence of Vibration and Thermal Fatigue on Coating Characteristics , 2018 .

[47]  P. Saha,et al.  Identifying defects and problems in laser cladding and suggestions of some remedies for the same , 2018 .

[48]  Rui-di Li,et al.  Laser cladding Ni-based alloy/nano-Ni encapsulated h-BN self-lubricating composite coatings , 2017 .

[49]  L. Berger,et al.  Thermally induced metallurgical processes in Cr 3 C 2 -NiCr thermal spray coatings as a function of carbide dissolution , 2017 .

[50]  Yong Liu,et al.  Microstructure and Wear Behavior of FeCoCrNiMo0.2 High Entropy Coatings Prepared by Air Plasma Spray and the High Velocity Oxy-Fuel Spray Processes , 2017 .

[51]  Gang Zhao,et al.  Chitosan-based polymer gel paper actuators coated with multi-wall carbon nanotubes and MnO2 composite electrode , 2017, Cellulose.

[52]  G. Sundararajan,et al.  Weibull analysis of hardness distribution in detonation sprayed nano-structured WC-12Co coatings , 2017 .

[53]  Z. Valefi,et al.  Microstructure, phase composition and mechanical properties of plasma sprayed Al2O3, Cr2O3 and Cr2O3-Al2O3 composite coatings , 2017 .

[54]  S. More,et al.  Resent Research Status on Laser Cladding as Erosion Resistance Technique - An Overview , 2017 .

[55]  Rossi Stefano,et al.  New architectured hybrid sol-gel coatings for wear and corrosion protection of low-carbon steel , 2016 .

[56]  Yedong He,et al.  Oxidation and hot corrosion behavior of Al2O3/YSZ coatings prepared by cathode plasma electrolytic deposition , 2016 .

[57]  M. A. Fazal,et al.  Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review , 2016 .

[58]  W. Harun,et al.  A review of hydroxyapatite-based coating techniques: Sol-gel and electrochemical depositions on biocompatible metals. , 2016, Journal of the mechanical behavior of biomedical materials.

[59]  N. Yusof,et al.  Fabrication and properties of triplex NiCrAlY/nano Al2O3·13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method , 2015 .

[60]  L. Berger.  Application of hardmetals as thermal spray coatings , 2015 .

[61]  Garima Singh,et al.  Sol-Gel processing of silica nanoparticles and their applications. , 2014, Advances in colloid and interface science.

[62]  Jin Soo Kim,et al.  Structural, optical, and electrical properties of ZnO thin films deposited by sol-gel dip-coating process at low temperature , 2014, Electronic Materials Letters.

[63]  A. Boudrioua,et al.  AZO Thin Films by Sol-Gel Process for Integrated Optics , 2013 .

[64]  Liang Wang,et al.  Microstructure and indentation mechanical properties of plasma sprayed nano-bimodal and conventional ZrO2–8wt%Y2O3 thermal barrier coatings , 2012 .

[65]  Axel H. E. Müller,et al.  One-dimensional organic-inorganic hybrid nanomaterials , 2010 .

[66]  S. Veldhuis,et al.  Wear behavior of adaptive nano-multilayered AlTiN/MexN PVD coatings during machining of aerospace alloys , 2010 .

[67]  D. M. Mattox,et al.  Handbook of physical vapor deposition (PVD) processing , 2010 .

[68]  Hui-di Zhou,et al.  Microstructures and properties of plasma sprayed FeAl/CeO2/ZrO2 nano-composite coating , 2010 .

[69]  P. Tessier,et al.  Ionized Physical Vapour Deposition combined with PECVD, for synthesis of carbon-metal nanocomposite thin films , 2009 .

[70]  Hong Yu Wang,et al.  Microstructure of nanometer Al2O3 dispersion strengthened Ni-based high-temperature protective coatings by laser cladding , 2009 .

[71]  Gordon P. Bierwagen,et al.  Sol–gel coatings on metals for corrosion protection , 2009 .

[72]  Y. Kajikawa.  Roughness evolution during chemical vapor deposition , 2008 .

[73]  Xue Qunj,et al.  Progress in Chinese Tribology Research and Application , 2008 .

[74]  M. Ürgen,et al.  Characterization of nano-composite TiN–Sb coating produced with hybrid physical vapor deposition system , 2007 .

[75]  B. Kear,et al.  High Pressure Synthesis of Nanophase WC / Co / Diamond Powders : Implications for Thermal Spraying , 2007 .

[76]  U. Helmersson,et al.  Ionized physical vapor deposition (IPVD): A review of technology and applications , 2006 .

[77]  L. Berger.  Hard but slippery - titanium hardmetal coatings have industrial potential , 2005 .

[78]  Jogender Singh,et al.  Synthesis and characterization of multilayered TiC/TiB2 coatings deposited by ion beam assisted, electron beam–physical vapor deposition (EB–PVD) , 2003 .

[79]  K. Choy.  Chemical vapour deposition of coatings , 2003 .

[80]  F. L. Bastian,et al.  Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder , 2002 .

[81]  F. Bundy,et al.  Man-Made Diamonds , 1955, Nature.