Analysis of Image and Development of UV Corona Camera for High-Voltage Discharge Detection

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV image. UV camera developed a of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. UV camera to measure the discharge count and the UV image was developed, compared with a commercial camera, there was no significant difference. In salt spray environments breakdown voltage was lower than the normal state, thereby discharging the image was rapidly growing phenomenon.

[1]  Chong-Min Kim,et al.  The Ultraviolet Generation Characteristics of Porcelain and Polymer Insulators by Corona Discharge , 2008 .

[2]  Philip J. Moore,et al.  Remote sensing of voltage using optical assessment of corona , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[3]  Kyung-Wan Koo,et al.  Comparison of the Poor Insulator Detecting Technique for the Reliability Enhancement of the Electric Power Facilities , 2008 .

[4]  Kil-Mok Shong,et al.  Images Detection and Diagnosis of Corona Discharge on Porcelain Insulators at 22.9kV D/L , 2007, 2007 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[5]  Zang Chunyan,et al.  Research on Mechanism and Ultraviolet Imaging of Corona Discharge of Electric Device Faults , 2008, Conference Record of the 2008 IEEE International Symposium on Electrical Insulation.