Abstract Hydrodynamics analyses as a part of the APEX (advanced power extraction) study demonstrates the potential application of applying swirling thick liquid walls to innovative confinement concepts such as field reversed configuration (FRC), spherical torus (ST) and heavy-ion fusion (HIF). This paper addresses the design and the hydrodynamic aspects of fusion relevant swirling flow including 3-D velocity distribution, variations of the flow height in axial and azimuthal directions and hydrodynamic flow stability. Numerical hydrodynamic analyses using a 3-D code with Flibe as the working fluid, shows that a thick liquid first-wall/blanket (>0.6 m) can be maintained in a circular vacuum chamber of 2 m radius by injecting the liquid layer from one side through a swirl flow generating inlet with axial (7 m/s) and azimuthal (10 m/s) velocity components. Parametric computational study indicated that the liquid layer thickness in axial and azimuthal directions is strongly dependent on the inlet axial, azimuthal velocity values and gravitational acceleration. It also shows that a uniform liquid layer thickness can be maintained for axial and azimuthal inlet velocities of 11 and 13 m/s in a cylindrical chamber with a 2 m radius and 12 m length. The swirling liquid wall idea is applied successfully to ST and HIF configurations. A 2D linear stability analysis using potential flow theory (Reynolds number is ∼10 6 for liquid wall thickness of ∼0.5 m) of the swirling flow in the azimuthal flow direction suggested that mean flow is stable when the surface tension, gravitational acceleration, and the centrifugal force effects are considered.
[1]
Ralph W. Moir,et al.
Rotating liquid blanket for a toroidal fusion reactor
,
1987
.
[2]
Zvi Rusak,et al.
On the stability of an axisymmetric rotating flow in a pipe
,
1996
.
[3]
J. Hassberger.
Stability of the FMIT high speed, free surface liquid jet flowing along a curved wall
,
1983
.
[4]
Mohamed A. Abdou,et al.
Exploring novel high power density concepts for attractive fusion systems
,
1999
.
[5]
Christopher E. Brennen,et al.
Cavity surface wave patterns and general appearance
,
1970,
Journal of Fluid Mechanics.
[6]
J. Hassberger.
Comparison between measured and predicted performance of a high speed, free surface liquid jet flowing along a curved wall
,
1983
.
[7]
Peter Bradshaw,et al.
The effect of convex surface curvature on turbulent boundary layers
,
1985,
Journal of Fluid Mechanics.
[8]
B. Glezer,et al.
Flow phenomena in swirl chambers
,
1997
.
[9]
I. Tani.
Production of longitudinal vortices in the boundary layer along a concave wall
,
1962
.
[10]
B. R. Ramaprian,et al.
The structure of turbulent boundary layers along mildly curved surfaces
,
1978,
Journal of Fluid Mechanics.
[11]
R. W. Moir,et al.
Liquid first walls for magnetic fusion energy configurations
,
1997
.