Auto-calibration of ultrasonic lubricant-film thickness measurements

The measurement of oil film thickness in a lubricated component is essential information for performance monitoring and design. It is well established that such measurements can be made ultrasonically if the lubricant film is modelled as a collection of small springs. The ultrasonic method requires that component faces are separated and a reference reflection recorded in order to obtain a reflection coefficient value from which film thickness is calculated. The novel and practically useful approach put forward in this paper and validated experimentally allows reflection coefficient measurement without the requirement for a reference. This involves simultaneously measuring the amplitude and phase of an ultrasonic pulse reflected from a layer. Provided that the acoustic properties of the substrate are known, the theoretical relationship between the two can be fitted to the data in order to yield reflection coefficient amplitude and phase for an infinitely thick layer. This is equivalent to measuring a reference signal directly, but importantly does not require the materials to be separated. The further valuable aspect of this approach, which is demonstrated experimentally, is its ability to be used as a self-calibrating routine, inherently compensating for temperature effects. This is due to the relationship between the amplitude and phase being unaffected by changes in temperature which cause unwanted changes to the incident pulse. Finally, error analysis is performed showing how the accuracy of the results can be optimized. A finding of particular significance is the strong dependence of the accuracy of the technique on the amplitude of reflection coefficient input data used. This places some limitations on the applicability of the technique.

[1]  A. Cameron,et al.  Flow of Electric Current Through Lubricated Contacts , 1967 .

[2]  D. Tabor,et al.  An utrasonic study of the area of contact between stationary and sliding surfaces , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[3]  Peter Cawley,et al.  The detection of thin embedded layers using normal incidence ultrasound , 1994 .

[4]  Salmiah Kasolang,et al.  The Phase Shift of an Ultrasonic Pulse at an Oil Layer and Determination of Film Thickness , 2005 .

[5]  B. R. Dudley,et al.  Measures to Counter Fatigue Failure in Railway Axles , 1967 .

[6]  R. S. Dwyer-Joyce,et al.  The measurement of lubricant–film thickness using ultrasound , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  B. Drinkwater,et al.  Acoustic measurement of lubricant-film thickness distribution in ball bearings , 2006 .

[8]  H. Tattersall The ultrasonic pulse-echo technique as applied to adhesion testing , 1973 .

[9]  S. Rokhlin,et al.  On the relationship between ultrasonic and micromechanical properties of contacting rough surfaces , 2002 .

[10]  R. Gohar,et al.  Theoretical and experimental studies of the oil film in lubricated point contact , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[11]  Bernard Hosten Bulk heterogeneous plane waves propagation through viscoelastic plates and stratified media with large values of frequency domain , 1991 .

[12]  D. G. Astridge,et al.  Paper 11: Capacitance Measurements and Oil Film Thickness in a Large-Radius Disc and Ring Machine , 1967 .

[13]  G. S. A. Shawki,et al.  Measurement of Oil-Film Thickness Between Disks by Electrical Conductivity , 1960 .

[14]  J. Królikowski,et al.  Phase shift of the reflection coefficient of ultrasonic waves in the study of the contact interface , 1992 .

[15]  E. Waschkies,et al.  Temperature dependence of the ultrasonic transmission through electrical resistance heated imperfect metal–metal interfaces , 2004 .

[16]  R. S. Dwyer-Joyce,et al.  A Method for the Measurement of Hydrodynamic Oil Films Using Ultrasonic Reflection , 2004 .

[17]  Gary L. Borman,et al.  Using Fiber Optics and Laser Fluorescence for Measuring Thin Oil Films with Application to Engines , 1991 .

[18]  P. Cawley,et al.  A study of the interaction between ultrasound and a partially contacting solid—solid interface , 1996, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[19]  Rob Dwyer-Joyce,et al.  Calibration of the ultrasonic lubricant-film thickness measurement technique , 2005 .

[20]  Peter B. Nagy,et al.  Ultrasonic classification of imperfect interfaces , 1992 .

[21]  J. Królikowski,et al.  Prediction of contact parameters using ultrasonic method , 1991 .