Distributed Systems Design Case Study: An Integrated Manufacturing and Management System for Manufacturing Enterprises

An approach to design of a large-scale distributed system intended for factory automation is described for a case study of Computer Integrated Manufacturing and Management systems (CIMMs). Some aspects of the two basic approaches to design of CIMMs (by-organisation and by-thinking) are compared. The paper presents some experience in design and development large-scale systems and the current state of art for the domain., being a good example of complex computer systems.

[1]  Leopoldo García Franquelo,et al.  > Replace This Line with Your Paper Identification Number (double-click Here to Edit) < , 2022 .

[2]  Hartmut Logemann,et al.  Multivariable feedback design : J. M. Maciejowski , 1991, Autom..

[3]  Hasan Komurcugil,et al.  Steady-State Analysis and Passivity-Based Control of Single-Phase PWM Current-Source Inverters , 2010, IEEE Transactions on Industrial Electronics.

[4]  Gilles Ferreres,et al.  A Practical Approach to Robustness Analysis with Aeronautical Applications , 1999 .

[5]  Vesna M. Ojleska,et al.  A Case Study : Performance Evaluation For A Computer Integrated Power Plant Network , 2012 .

[6]  Jozef B. Lewoc.  Case study: Practical ethical aspects for technology transfer and change in computer control system , 2005 .

[7]  Kenneth P. Birman,et al.  Reliable Distributed Systems: Technologies, Web Services, and Applications , 2005 .

[8]  Georgi M. Dimirovski,et al.  Power Generation/Distribution Control Systems Topology Selection Based on Robustness Evaluation , 2009 .

[9]  Lorenzo Marconi,et al.  Robust Asymptotic Stabilization of Nonlinear Systems With Non-Hyperbolic Zero Dynamics , 2008, IEEE Transactions on Automatic Control.

[10]  Fortunato Santucci,et al.  A comprehensive framework for performance analysis of cooperative multi-hop wireless systems over log-normal fading channels , 2010, IEEE Transactions on Communications.

[11]  Salama Ikki,et al.  Performance analysis of adaptive decode-and-forward cooperative diversity networks with best-relay selection , 2010, IEEE Transactions on Communications.

[12]  Veit Hagenmeyer,et al.  Robustness Analysis With Respect to Exogenous Perturbations for Flatness-Based Exact Feedforward Linearization , 2010, IEEE Transactions on Automatic Control.

[13]  Barry W. Williams,et al.  Steady-State Performance and Stability Analysis of Mixed Pole Machines With Electromechanical Torque and Rotor Electric Power to a Shaft-Mounted Electrical Load , 2010, IEEE Transactions on Industrial Electronics.

[14]  Zhi Gao,et al.  A Complex Space Vector Approach to Rotor Temperature Estimation for Line-Connected Induction Machines With Impaired Cooling , 2009, IEEE Transactions on Industrial Electronics.

[15]  Jozef B. Lewoc,et al.  Development of Computer Integrated Manufacturing and Management Systems , 2006 .

[16]  Jozef B. Lewoc,et al.  Automation, Control and Supervision of Combined Heat and Power Systems , 2006 .

[17]  R. Serfozo.  Introduction to Stochastic Networks , 1999 .

[18]  Jozef B. Lewoc,et al.  Economic, Ethical and Cultural Aspects of ICT Change , 2006 .

[19]  Subhashish Bhattacharya,et al.  Performance Evaluation of Controlled-Capacitor-Charging-Type Inverters , 2009, IEEE Transactions on Industrial Electronics.

[20]  Jozef B. Lewoc,et al.  A LSIS CASE STUDY: COMPUTER INTEGRATED MANUFACTURING AND MANAGEMENT SYSTEMS , 2006 .

[21]  A. Tomczyk,et al.  A distributed data base for real-time control/monitoring of power plants , 1990 .

[22]  Motohiro Kawafuku,et al.  Initial Value Compensation Using Additional Input for Semi-Closed Control Systems , 2009, IEEE Transactions on Industrial Electronics.

[23]  Thierry Lebey,et al.  Identification and Time-Domain Simulation of the Association Inverter–Cable–Asynchronous Machine Using Diffusive Representation , 2009, IEEE Transactions on Industrial Electronics.

[24]  Jozef B. Lewoc,et al.  Some aspects of technology transfer - A case study , 2001 .

[25]  Pavol Bauer,et al.  Dynamic Behavior Modeling and Verification of Advanced Electrical-Generator Set Concept , 2009, IEEE Transactions on Industrial Electronics.

[26]  Jozef B. Lewoc,et al.  Robust Performance Case Study: Topology of System Media - The First Step to Computer Integrated Manufacturing and Management Systems , 2003 .

[27]  Lutz H.-J. Lampe,et al.  An analytical approach for performance evaluation of BICM transmission over Nakagami-m fading channels , 2010, IEEE Transactions on Communications.

[28]  Jozef B. Lewoc,et al.  Power Industry Computer Control System Design and Implementation Problems: A Case Study of Poland , 2012 .

[29]  John C. Doyle.  Analysis of Feedback Systems with Structured Uncertainty , 1982 .

[30]  Luis García de Vicuña,et al.  Modeling and Performance Analysis of the DC/DC Series–Parallel Resonant Converter Operating With Discrete Self-Sustained Phase-Shift Modulation Technique , 2009, IEEE Transactions on Industrial Electronics.

[31]  Khashayar Khorasani,et al.  A Robust Distributed Congestion-Control Strategy for Differentiated-Services Network , 2009, IEEE Transactions on Industrial Electronics.

[32]  Nicolai M. Josuttis,et al.  Soa In Practice The Art Of Distributed System Design , 2007 .

[33]  Nancy G. Leveson,et al.  Software Requirements Analysis for Real-Time Process-Control Systems , 1991, IEEE Trans. Software Eng..

[34]  Antoni Izworski,et al.  A Case Study: History of Polish Computer Applications in Power System Control , 2008, HCE3.

[35]  Luis Angel Barragan,et al.  Power Measurement by Output-Current Integration in Series Resonant Inverters , 2009, IEEE Transactions on Industrial Electronics.