Current status on clinical applications of magnesium-based orthopaedic implants: A review from clinical translational perspective.

As a new generation of medical metallic material, magnesium (Mg) and its alloys with or without surface coating have attracted a great deal of attention due to its biodegradability and potential for avoiding a removal operation after the implant has fulfilled its function for surgical fixation of injured musculoskeletal tissues. Although a few clinical cases on Mg-based orthopaedic implants were reported more than a century ago, it was not until recently that clinical trials using these implants with improved physicochemical properties were carried out in Germany, China and Korea for bone fracture fixation. The promising results so far suggest a bright future for biodegradable Mg-based orthopaedic implants and would warrant large scale phase II/III studies. Given the increasing interest on this emerging biomaterials and intense effort to improve its properties for various clinical applications, this review covers the evolution, current strategies, and future perspectives in the development of Mg-based orthopaedic implants. We also highlight a few clinical cases performed in China that may be unfamiliar to the general orthopaedic community.

[1]  F. A. Azem,et al.  Bioactivity and corrosion properties of magnesium-substituted CaP coatings produced via electrochemical deposition , 2016 .

[2]  R. Willumeit,et al.  Reprint of: Improved cytotoxicity testing of magnesium materials☆ , 2011 .

[3]  Alexis M Pietak,et al.  Magnesium and its alloys as orthopedic biomaterials: a review. , 2006, Biomaterials.

[4]  H. Haferkamp,et al.  In vivo corrosion of four magnesium alloys and the associated bone response. , 2005, Biomaterials.

[5]  장윤희,et al.  Y. , 2003, Industrial and Labor Relations Terms.

[6]  O. Maier Über die Verwendbarkeit von Leichtmetallen in der Chirurgie (metallisches Magnesium als Reizmittel zur Knochenneubildung) , 1940, Deutsche Zeitschrift für Chirurgie.

[7]  Frank Witte,et al.  In vitro and in vivo corrosion measurements of magnesium alloys. , 2006, Biomaterials.

[8]  Akiko Yamamoto,et al.  Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro , 2009 .

[9]  Ying Chen,et al.  Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation , 2011, Biomedical materials.

[10]  Hyoun‐Ee Kim,et al.  Hydroxyapatite-coated magnesium implants with improved in vitro and in vivo biocorrosion, biocompatibility, and bone response. , 2014, Journal of biomedical materials research. Part A.

[11]  L. Tan,et al.  The preparation, cytocompatibility, and in vitro biodegradation study of pure β-TCP on magnesium , 2009, Journal of materials science. Materials in medicine.

[12]  Bruno Péault,et al.  Current Trends in Bone Tissue Engineering , 2014, BioMed research international.

[13]  Fu-ping Wang,et al.  Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment , 2013 .

[14]  E. Willbold,et al.  Biodegradable magnesium scaffolds: Part 1: appropriate inflammatory response. , 2007, Journal of biomedical materials research. Part A.

[15]  P. Chu,et al.  Surface design of biodegradable magnesium alloys — A review , 2013 .

[16]  Yufeng Zheng,et al.  Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium. , 2015, Acta biomaterialia.

[17]  Fritz Thorey,et al.  Biomechanical testing and degradation analysis of MgCa0.8 alloy screws: a comparative in vivo study in rabbits. , 2011, Acta biomaterialia.

[18]  Prashant N. Kumta,et al.  In vivo study of magnesium plate and screw degradation and bone fracture healing. , 2015, Acta biomaterialia.

[19]  S. Hiromoto,et al.  High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution , 2009 .

[20]  Kaiwen Wei,et al.  Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy , 2014 .

[21]  Yufeng Zheng,et al.  High-purity magnesium interference screws promote fibrocartilaginous entheses regeneration in the anterior cruciate ligament reconstruction rabbit model via accumulation of BMP-2 and VEGF. , 2016, Biomaterials.

[22]  Aaron F. Cipriano,et al.  An in vivo study on the metabolism and osteogenic activity of bioabsorbable Mg-1Sr alloy. , 2016, Acta biomaterialia.

[23]  T. Iizuka,et al.  In vivo degradation of a new concept of magnesium-based rivet-screws in the minipig mandibular bone. , 2016, Materials science & engineering. C, Materials for biological applications.

[24]  W. Dockery,et al.  Long-term absorption of poly-L-lactic Acid interference screws. , 2006, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[25]  Yao Jiang,et al.  Biocompatibility of magnesium-zinc alloy in biodegradable orthopedic implants. , 2011, International journal of molecular medicine.

[26]  M. Tomozawa,et al.  Microstructure of hydroxyapatite- and octacalcium phosphate-coatings formed on magnesium by a hydrothermal treatment at various pH values , 2011 .

[27]  Yufeng Zheng,et al.  Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats , 2016, Nature Medicine.

[28]  Wei Sun,et al.  The fluoride coated AZ31B magnesium alloy improves corrosion resistance and stimulates bone formation in rabbit model. , 2016, Materials science & engineering. C, Materials for biological applications.

[29]  P. Cao,et al.  In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy , 2010 .

[30]  Yufeng Zheng,et al.  Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials. , 2015, Acta biomaterialia.

[31]  Sergey V. Dorozhkin,et al.  Calcium orthophosphates , 2007 .

[32]  Henning Windhagen,et al.  Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study , 2013, BioMedical Engineering OnLine.

[33]  Changsheng Liu,et al.  Biomimetic porous scaffolds for bone tissue engineering , 2014 .

[34]  Y. Zheng,et al.  Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan , 2009, Biomedical materials.

[35]  P. Uggowitzer,et al.  In vivo degradation performance of micro-arc-oxidized magnesium implants: a micro-CT study in rats. , 2013, Acta biomaterialia.

[36]  A. Singh,et al.  Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .

[37]  Ke Yang,et al.  In vitro degradation and biocompatibility of a strontium-containing micro-arc oxidation coating on the biodegradable ZK60 magnesium alloy , 2014 .

[38]  Syam P Nukavarapu,et al.  Short-term and long-term effects of orthopedic biodegradable implants. , 2011, Journal of long-term effects of medical implants.

[39]  Yang Song,et al.  Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior. , 2010, Acta biomaterialia.

[40]  G. Kumar,et al.  Implant removal following surgical stabilization of patella fracture. , 2010, Orthopedics.

[41]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[42]  T. Woodfield,et al.  Corrosion resistance of biomimetic calcium phosphate coatings on magnesium due to varying pretreatment time , 2011 .

[43]  Jae-Young Jung,et al.  Biodegradability engineering of biodegradable Mg alloys: Tailoring the electrochemical properties and microstructure of constituent phases , 2013, Scientific Reports.

[44]  M. Niinomi,et al.  Development of new metallic alloys for biomedical applications. , 2012, Acta biomaterialia.

[45]  Yufeng Zheng,et al.  In vitro and in vivo studies on a Mg-Sr binary alloy system developed as a new kind of biodegradable metal. , 2012, Acta biomaterialia.

[46]  E. Witsø,et al.  Periprosthetic fracture caused by stress shielding after implantation of a femoral condyle endoprosthesis in a transfemoral amputee—a case report , 2010, Acta orthopaedica.

[47]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[48]  Ling Qin,et al.  Bacterial inhibition potential of 3D rapid-prototyped magnesium-based porous composite scaffolds–an in vitro efficacy study , 2015, Scientific Reports.

[49]  S. Dorozhkin Calcium orthophosphates , 2011, Biomatter.

[50]  M. Walsh,et al.  Removal of painful orthopaedic implants after fracture union. , 2007, The Journal of bone and joint surgery. American volume.

[51]  G. Yuan,et al.  Enhancement of osteogenesis and biodegradation control by brushite coating on Mg-Nd-Zn-Zr alloy for mandibular bone repair. , 2014, ACS applied materials & interfaces.

[52]  T. Woodfield,et al.  Improving in vitro corrosion resistance of biomimetic calcium phosphate coatings for Mg substrates using calcium hydroxide layer , 2012 .

[53]  Seyed Mohammad Ali Razavi,et al.  In vivo study of nanostructured diopside (CaMgSi2O6) coating on magnesium alloy as biodegradable orthopedic implants , 2014 .

[54]  W. Ding,et al.  Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg-Nd-Zn-Zr alloy with different extrusion ratios. , 2012, Journal of the mechanical behavior of biomedical materials.

[55]  D. Kaplan,et al.  Absorbable biologically based internal fixation. , 2015, Clinics in podiatric medicine and surgery.

[56]  Thanh Yen Nguyen,et al.  An In Vitro Mechanism Study on the Proliferation and Pluripotency of Human Embryonic Stems Cells in Response to Magnesium Degradation , 2013, PloS one.

[57]  Yisheng Wang,et al.  In vivo degradation and bone response of a composite coating on Mg-Zn-Ca alloy prepared by microarc oxidation and electrochemical deposition. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[58]  J. Ong,et al.  Hydroxyapatite and their use as coatings in dental implants: a review. , 2000, Critical reviews in biomedical engineering.

[59]  E. Mcbride MAGNESIUM SCREW AND NAIL TRANSFIXION IN FRACTURES , 1938 .

[60]  Ke Yang,et al.  Loss of mechanical properties in vivo and bone-implant interface strength of AZ31B magnesium alloy screws with Si-containing coating. , 2014, Acta biomaterialia.

[61]  C. Ambrose,et al.  Polymers in Orthopaedic Surgery , 2015 .

[62]  A. A. Bakir,et al.  Porous Biodegradable Metals for Hard Tissue Scaffolds: A Review , 2012, International journal of biomaterials.

[63]  P. Uggowitzer,et al.  Magnesium alloys for temporary implants in osteosynthesis: in vivo studies of their degradation and interaction with bone. , 2012, Acta biomaterialia.

[64]  G. Quamme,et al.  Epithelial magnesium transport and regulation by the kidney. , 2000, Frontiers in bioscience : a journal and virtual library.

[65]  Yufeng Zheng,et al.  In vitro and in vivo studies on the degradation of high-purity Mg (99.99wt.%) screw with femoral intracondylar fractured rabbit model. , 2015, Biomaterials.

[66]  Yangde Li,et al.  Biodegradable Magnesium (Mg) Implantation Does Not Impose Related Metabolic Disorders in Rats with Chronic Renal Failure , 2016, Scientific Reports.

[67]  S. Stanzl-Tschegg,et al.  Reaction of bone nanostructure to a biodegrading Magnesium WZ21 implant - A scanning small-angle X-ray scattering time study. , 2016, Acta biomaterialia.

[68]  D. Hutmacher,et al.  Bone tissue engineering , 2011 .

[69]  Yufeng Zheng,et al.  The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.

[70]  Yangde Li,et al.  Vascularized bone grafting fixed by biodegradable magnesium screw for treating osteonecrosis of the femoral head. , 2016, Biomaterials.

[71]  Spandan Maiti,et al.  Magnesium alloys as a biomaterial for degradable craniofacial screws. , 2014, Acta biomaterialia.

[72]  T. Woodfield,et al.  Synthesis of topologically-ordered open-cell porous magnesium , 2010 .

[73]  Abhay Pandit,et al.  Fabrication methods of porous metals for use in orthopaedic applications. , 2006, Biomaterials.

[74]  Savio L-Y Woo,et al.  Revolutionizing orthopaedic biomaterials: The potential of biodegradable and bioresorbable magnesium-based materials for functional tissue engineering. , 2014, Journal of biomechanics.

[75]  E. Mcbride,et al.  ABSORBABLE METAL IN BONE SURGERY: A FURTHER REPORT ON THE USE OF MAGNESIUM ALLOYS , 1938 .

[76]  F Rupp,et al.  Comparison of different in vitro tests for biocompatibility screening of Mg alloys. , 2013, Acta biomaterialia.

[77]  Jun Hu,et al.  Formation mechanism of calcium phosphate coating on micro-arc oxidized magnesium , 2011 .

[78]  Seyed Mohammad Ali Razavi,et al.  Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi2O6) , 2014 .

[79]  Yufeng Zheng,et al.  Biodegradable CaMgZn bulk metallic glass for potential skeletal application. , 2011, Acta biomaterialia.

[80]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[81]  James Odell,et al.  Objects and Agents Compared , 2002, J. Object Technol..

[82]  J. Branstetter,et al.  The use of three types of suture and stainless steel wire tension banding for the fixation of simulated olecranon fractures: a comparison study in cadaver elbows. , 2010, The Journal of bone and joint surgery. British volume.

[83]  H. Schlüter,et al.  Intramedullary Mg2Ag nails augment callus formation during fracture healing in mice. , 2016, Acta biomaterialia.

[84]  G. Thouas,et al.  Metallic implant biomaterials , 2015 .

[85]  Ke Yang,et al.  In vivo evaluation of biodegradable magnesium alloy bone implant in the first 6 months implantation. , 2009, Journal of biomedical materials research. Part A.

[86]  Diego Mantovani,et al.  Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy , 2016, Proceedings of the National Academy of Sciences.

[87]  Andrea Meyer-Lindenberg,et al.  Long-term in vivo degradation behaviour and biocompatibility of the magnesium alloy ZEK100 for use as a biodegradable bone implant. , 2013, Acta biomaterialia.

[88]  C. Klose,et al.  The Manufacture of Resorbable Suture Material from Magnesium – Drawing and Stranding of Thin Wires , 2011 .

[89]  A R Boccaccini,et al.  Biomedical coatings on magnesium alloys - a review. , 2012, Acta biomaterialia.

[90]  C. Sfeir,et al.  Biomimetic coating of magnesium alloy for enhanced corrosion resistance and calcium phosphate deposition. , 2013, Acta biomaterialia.

[91]  G. Song,et al.  Corrosion mechanisms of magnesium alloys , 1999 .

[92]  M. Buckley,et al.  Stress shielding effect of rigid internal fixation plates on mandibular bone grafts. A photon absorption densitometry and quantitative computerized tomographic evaluation. , 1989, International journal of oral and maxillofacial surgery.

[93]  J. Bao,et al.  Comparison of biodegradable and metallic tension-band fixation for patella fractures. 38 patients followed for 2 years. , 1998, Acta orthopaedica Scandinavica.

[94]  A. Kesselheim,et al.  How Does Medical Device Regulation Perform in the United States and the European Union? A Systematic Review , 2012, PLoS medicine.

[95]  J. Vormann Magnesium: nutrition and metabolism. , 2003, Molecular aspects of medicine.

[96]  Hong-feng Jiang,et al.  In vivo comparative property study of the bioactivity of coated Mg-3Zn-0.8Zr alloy. , 2013, Materials science & engineering. C, Materials for biological applications.

[97]  N E Saris,et al.  Magnesium. An update on physiological, clinical and analytical aspects. , 2000, Clinica chimica acta; international journal of clinical chemistry.

[98]  D. Bormann,et al.  The Manufacture of Resorbable Suture Material from Magnesium , 2010 .

[99]  Ke Yang,et al.  In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy. , 2009, Biomaterials.

[100]  Motoki Inoue,et al.  In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite. , 2015, Acta biomaterialia.

[101]  Ke Yang,et al.  In vivo degradation and tissue compatibility of ZK60 magnesium alloy with micro-arc oxidation coating in a transcortical model. , 2013, Materials science & engineering. C, Materials for biological applications.

[102]  Ke Yang,et al.  Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy , 2010 .

[103]  Liping Xu,et al.  Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating. , 2012, Colloids and surfaces. B, Biointerfaces.

[104]  Liguo Wang,et al.  In vivo degradation behavior of Ca-deficient hydroxyapatite coated Mg-Zn-Ca alloy for bone implant application. , 2011, Colloids and surfaces. B, Biointerfaces.

[105]  J. Tasto,et al.  Bioabsorbable implants in orthopaedics: new developments and clinical applications. , 2001, The Journal of the American Academy of Orthopaedic Surgeons.

[106]  Yufeng Zheng,et al.  In vivo stimulation of bone formation by aluminum and oxygen plasma surface-modified magnesium implants. , 2013, Biomaterials.

[107]  R. Touyz Magnesium in clinical medicine. , 2004, Frontiers in bioscience : a journal and virtual library.

[108]  Lobat Tayebi,et al.  In vivo assessments of bioabsorbable AZ91 magnesium implants coated with nanostructured fluoridated hydroxyapatite by MAO/EPD technique for biomedical applications. , 2015, Materials science & engineering. C, Materials for biological applications.

[109]  Ling Qin,et al.  Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: a general review. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[110]  Lei Guo,et al.  In vitro and in vivo evaluations on osteogenesis and biodegradability of a β-tricalcium phosphate coated magnesium alloy. , 2012, Journal of biomedical materials research. Part A.

[111]  Yangde Li,et al.  Surface coating reduces degradation rate of magnesium alloy developed for orthopaedic applications , 2013 .

[112]  B. Yan,et al.  Microstructure, in vitro corrosion and cytotoxicity of Ca-P coatings on ZK60 magnesium alloy prepared by simple chemical conversion and heat treatment , 2013, Journal of biomaterials applications.

[113]  Jing Li,et al.  The effects of nail rigidity on fracture healing in rats with osteoporosis , 2009, Acta orthopaedica.

[114]  H. Wong,et al.  A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. , 2010, Biomaterials.

[115]  F. Beckmann,et al.  In vivo corrosion and corrosion protection of magnesium alloy LAE442. , 2010, Acta biomaterialia.

[116]  Frank Witte,et al.  The history of biodegradable magnesium implants: a review. , 2010, Acta biomaterialia.

[117]  W. Ding,et al.  Enhanced biocorrosion resistance and biocompatibility of degradable Mg-Nd-Zn-Zr alloy by brushite coating. , 2013, Materials science & engineering. C, Materials for biological applications.

[118]  Bastian Welke,et al.  In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep model. , 2015, Acta biomaterialia.

[119]  M. Tomozawa,et al.  Microstructure of hydroxyapatite-coated magnesium prepared in aqueous solution , 2010 .

[120]  F. Fang,et al.  Microstructure , 2019, CIRP Encyclopedia of Production Engineering.

[121]  S. Dorozhkin Calcium orthophosphate coatings on magnesium and its biodegradable alloys. , 2014, Acta biomaterialia.

[122]  Christian Heiss,et al.  The Biocompatibility of Degradable Magnesium Interference Screws: An Experimental Study with Sheep , 2015, BioMed research international.