Topology optimization of pretensioned reflector antennas with unified cable-bar model

Abstract From innovative high-rise buildings through spacecraft, applications of prestressed cables are not uncommon. But the use of prestressed cables in ground-based reflector antennas is very rare. In this paper, prestressed cables were introduced to the ground-based antennas to achieve the lightweight design requirements. To determine the layout of the prestressed cables, a gradient-based topology optimization model was established. In this optimization model, the continuously varying 'lack of fit' is used to replace the discrete element type variables as the design variables, and smooth sigmoid functions are introduced to unify the discrete allowable stress of cable and bar elements. Eventually, the discrete topological variable optimization problem is transformed into a continuous one. Besides, to avoid the occurrence of grey elements in the optimized results, a parameter control strategy for the sigmoid functions is carried out during the optimization procedure. As an example, the optimizations of an 8 m truss antenna and an 8 m cable-truss antenna are implemented, and the discussions of the results are given.

[1]  G. Cheng,et al.  ε-relaxed approach in structural topology optimization , 1997 .

[2]  Roy Levy,et al.  Computer-aided design of antenna structures and components , 1976 .

[3]  Roy Levy,et al.  Structural engineering of microwave antennas : for electrical, mechanical, and civil engineers , 1996 .

[4]  Na Li,et al.  Dynamic analysis of the deployment for mesh reflector deployable antennas with the cable-net structure , 2017 .

[5]  Tuanjie Li,et al.  Surface accuracy analysis of large deployable antennas , 2014 .

[6]  R. P. Ingalls,et al.  Upgrading the Haystack radio telescope for operation at 115 GHz , 1994, Proc. IEEE.

[7]  Di Wu,et al.  Experiments on the dish verification antenna china for the SKA , 2016 .

[8]  Congsi Wang,et al.  On distorted surface analysis and multidisciplinary structural optimization of large reflector antennas , 2007 .

[9]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[10]  L. Hollaway,et al.  Integrated structure-electromagnetic optimization of large reflector antenna systems , 1998 .

[11]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[12]  Lin Liao,et al.  Finite Element Analysis of Cable-truss Structures , 2010 .

[13]  Gyula Greschik,et al.  Truss Beam with Tendon Diagonals: Mechanics and Designs , 2008 .

[14]  Joseph Antebi,et al.  Replacement of elevation structure to upgrade Haystack 37-m radio telescope , 2004, SPIE Astronomical Telescopes + Instrumentation.

[15]  Jingli Du,et al.  Model Reduction of Cable Mesh Reflector Antennas With Integrated Structural-Electromagnetic Criterion , 2018, IEEE/ASME Transactions on Mechatronics.

[16]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[17]  Govind Swarup,et al.  The Giant Metre-Wave Radio Telescope , 1991 .

[18]  Gengdong Cheng,et al.  Recent development in structural design and optimization , 2010 .

[19]  Mark McKinnon,et al.  A preliminary operations concept for the ngVLA , 2016, Astronomical Telescopes + Instrumentation.

[20]  Mehdi S. Zarghamee.  Minimum Weight Design of Enclosed Antennas , 1969 .

[21]  S. V. Hoerner,et al.  Gravitational deformation and astigmatism of tiltable radio telescopes , 1975 .

[22]  Michael Valásek,et al.  Hybrid fuzzy-genetic system for optimising cabled-truss structures , 2013, Adv. Eng. Softw..

[23]  William R. Fanning.  Structural Analysis of the Haystack Antenna , 1966 .

[24]  J. Ruze.  Antenna tolerance theory—A review , 1966 .

[25]  Robert Levy,et al.  Optimal design of prestressed trusses , 1992 .

[26]  Baoyan Duan,et al.  Design of tipping structure for 110 m high-precision radio telescope , 2017 .

[27]  Yahya Rahmat-Samii,et al.  Reflector Antenna Developments: A Perspective on the Past, Present and Future , 2015, IEEE Antennas and Propagation Magazine.

[28]  S. Ananthakrishnan.  The giant meterwave radio telescope , 1995 .

[29]  S. V. Hoerner,et al.  Design of large steerable antennas , 1967 .

[30]  Hans A. Eschenauer.  Structural behaviour and optimal layout of light constructions , 2006 .

[31]  Hong Bao,et al.  Shape adjustment optimization and experiment of cable-membrane reflectors , 2018 .

[32]  Binbin Xiang,et al.  Homology Parameters for Large Axisymmetric Shaped Dual-Reflector Antennas , 2017, IEEE Transactions on Antennas and Propagation.

[33]  Frank W. Kan,et al.  Optimal surface adjustment of Haystack antenna , 1995 .