An on-line Kriging metamodel assisted robust optimization approach under interval uncertainty

Purpose Uncertainty is inevitable in real-world engineering optimization. With an outer-inner optimization structure, most previous robust optimization (RO) approaches under interval uncertainty can become computationally intractable because the inner level must perform robust evaluation for each design alternative delivered from the outer level. This paper aims to propose an on-line Kriging metamodel-assisted variable adjustment robust optimization (OLK-VARO) to ease the computational burden of previous VARO approach. Design/methodology/approach In OLK-VARO, Kriging metamodels are constructed for replacing robust evaluations of the design alternative delivered from the outer level, reducing the nested optimization structure of previous VARO approach into a single loop optimization structure. An on-line updating mechanism is introduced in OLK-VARO to exploit the obtained data from previous iterations. Findings One nonlinear numerical example and two engineering cases have been used to demonstrate the applicability and efficiency of the proposed OLK-VARO approach. Results illustrate that OLK-VARO is able to obtain comparable robust optimums as to that obtained by previous VARO, while at the same time significantly reducing computational cost. Practical implications The proposed approach exhibits great capability for practical engineering design optimization problems under interval uncertainty. Originality/value The main contribution of this paper lies in the following: an OLK-VARO approach under interval uncertainty is proposed, which can significantly ease the computational burden of previous VARO approach.

[1]  K. M. Ragsdell,et al.  Optimal Design of a Class of Welded Structures Using Geometric Programming , 1976 .

[2]  Genichi Taguchi,et al.  Performance analysis design , 1978 .

[3]  Kalyanmoy Deb,et al.  Optimal design of a welded beam via genetic algorithms , 1991 .

[4]  S. N. Kramer,et al.  An Augmented Lagrange Multiplier Based Method for Mixed Integer Discrete Continuous Optimization and Its Applications to Mechanical Design , 1994 .

[5]  Jian Su,et al.  Automatic Differentiation in Robust Optimization , 1997 .

[6]  Kwon-Hee Lee,et al.  Robust optimization considering tolerances of design variables , 2001 .

[7]  Kikuo Fujita,et al.  Mini-Max Type Formulation of Strict Robust Design Optimization Under Correlative Variation , 2002, DAC 2002.

[8]  Xiaohui Hu,et al.  Engineering optimization with particle swarm , 2003, Proceedings of the 2003 IEEE Swarm Intelligence Symposium. SIS'03 (Cat. No.03EX706).

[9]  Thomas J. Santner,et al.  Design and analysis of computer experiments , 1998 .

[10]  Subroto Gunawan,et al.  Parameter Sensitivity Measures for Single Objective, Multi-Objective, and Feasibility Robust Design Optimization , 2004 .

[11]  Shapour Azarm,et al.  Non-Gradient Based Parameter Sensitivity Estimation for Single Objective Robust Design Optimization , 2004 .

[12]  S. Azarm,et al.  Multi-objective robust optimization using a sensitivity region concept , 2005 .

[13]  Irfan Kaymaz,et al.  Application Of Kriging Method To Structural Reliability Problems , 2005 .

[14]  S. Azarm,et al.  A New Deterministic Approach Using Sensitivity Region Measures for Multi-Objective Robust and Feasibility Robust Design Optimization , 2005, DAC 2005.

[15]  Jia Guo,et al.  Sequential optimization and reliability assessment for multidisciplinary systems design , 2008 .

[16]  Tae Hee Lee,et al.  A sampling technique enhancing accuracy and efficiency of metamodel-based RBDO: Constraint boundary sampling , 2008 .

[17]  M. Eldred,et al.  Efficient Global Reliability Analysis for Nonlinear Implicit Performance Functions , 2008 .

[18]  Shapour Azarm,et al.  Interval Uncertainty Reduction and Single-Disciplinary Sensitivity Analysis With Multi-Objective Optimization , 2009 .

[19]  Shapour Azarm,et al.  Optimal uncertainty reduction for multi-disciplinary multi-output systems using sensitivity analysis , 2009 .

[20]  Jack P. C. Kleijnen,et al.  Kriging Metamodeling in Simulation: A Review , 2007, Eur. J. Oper. Res..

[21]  Heung-Geun Kim,et al.  Robust Optimization Utilizing the Second-Order Design Sensitivity Information , 2010, IEEE Transactions on Magnetics.

[22]  Sankaran Mahadevan,et al.  Efficient surrogate models for reliability analysis of systems with multiple failure modes , 2011, Reliab. Eng. Syst. Saf..

[23]  Shapour Azarm,et al.  Interval Uncertainty-Based Robust Optimization for Convex and Non-Convex Quadratic Programs with Applications in Network Infrastructure Planning , 2011 .

[24]  Shapour Azarm,et al.  A modified Benders decomposition method for efficient robust optimization under interval uncertainty , 2011 .

[25]  Nicolas Gayton,et al.  AK-MCS: An active learning reliability method combining Kriging and Monte Carlo Simulation , 2011 .

[26]  Jianhua Zhou,et al.  Sequential Quadratic Programming for Robust Optimization With Interval Uncertainty , 2012 .

[27]  Xin Li,et al.  A Kriging-based hybrid optimization algorithm for slope reliability analysis , 2012 .

[28]  Kyriakos C. Giannakoglou,et al.  Third‐order sensitivity analysis for robust aerodynamic design using continuous adjoint , 2013 .

[29]  S. Azarm,et al.  Adaptive gradient-assisted robust design optimization under interval uncertainty , 2013 .

[30]  Jianhua Zhou,et al.  Advanced Robust Optimization With Interval Uncertainty Using a Single-Looped Structure and Sequential Quadratic Programming , 2014 .

[31]  Cécile Murat,et al.  Recent advances in robust optimization: An overview , 2014, Eur. J. Oper. Res..

[32]  Qing Li,et al.  Robust optimization of foam-filled thin-walled structure based on sequential Kriging metamodel , 2014 .

[33]  Shapour Azarm,et al.  Solving mixed-integer robust optimization problems with interval uncertainty using Benders decomposition , 2015, J. Oper. Res. Soc..

[34]  Hui Zhou,et al.  An adaptive global variable fidelity metamodeling strategy using a support vector regression based scaling function , 2015, Simul. Model. Pract. Theory.

[35]  Hui Zhou,et al.  A deterministic robust optimisation method under interval uncertainty based on the reverse model , 2015 .

[36]  Peihua Gu,et al.  Adaptable design of open architecture products with robust performance , 2015 .

[37]  Mian Li,et al.  Robust optimization using hybrid differential evolution and sequential quadratic programming , 2015 .

[38]  Liang Gao,et al.  Analytical target cascading using ensemble of surrogates for engineering design problems , 2015 .

[39]  Guido Carpinelli,et al.  Multi-linear Monte Carlo simulation method for probabilistic load flow of distribution systems with wind and photovoltaic generation systems , 2015 .

[40]  Jianhua Zhou,et al.  A New Hybrid Algorithm for Multi-Objective Robust Optimization With Interval Uncertainty , 2015 .

[41]  Liang Gao,et al.  An efficient method for reliability analysis under epistemic uncertainty based on evidence theory and support vector regression , 2015 .

[42]  Kemper Lewis,et al.  A predictive modelling-based material selection method for sustainable product design , 2015 .

[43]  Hailong Zhao,et al.  An efficient reliability method combining adaptive importance sampling and Kriging metamodel , 2015 .

[44]  Liang Gao,et al.  A local sampling method with variable radius for RBDO using Kriging , 2015 .

[45]  Jan-Yan Lin,et al.  Extended modeling procedure based on the projected sample for forecasting short-term electricity consumption , 2016, Adv. Eng. Informatics.

[46]  Chao-Chao Wang,et al.  Optimization of laser welding process parameters of stainless steel 316L using FEM, Kriging and NSGA-II , 2016, Adv. Eng. Softw..

[47]  Zhizhong Mao,et al.  Tree-Structure Ensemble General Regression Neural Networks applied to predict the molten steel temperature in Ladle Furnace , 2016, Adv. Eng. Informatics.

[48]  Chao-Chao Wang,et al.  An active learning metamodeling approach by sequentially exploiting difference information from variable-fidelity models , 2016, Adv. Eng. Informatics.

[49]  Xinyu Shao,et al.  Parameters optimization of hybrid fiber laser-arc butt welding on 316L stainless steel using Kriging model and GA , 2016 .

[50]  Ren Long,et al.  A modified BLISCO method and its combination with variable fidelity metamodel for engineering design , 2016 .

[51]  Søren Nygaard Pedersen,et al.  Robust design requirements specification: a quantitative method for requirements development using quality loss functions , 2016 .