Design and prototyping of beam shapers to generate circular or square top-hat beams of different size for additive manufacturing applications

Many industrial and research applications benefit from laser beam profiles which are non-Gaussian but rather tailored to that specific application. For example, shaping the beam profile and footprint holds great potential for beam delivery in laser-assisted manufacturing processes. In particular, top hat beam profiles of different shapes and size would enable speeding up additive manufacturing while increasing the resolution of the 3D printed parts. In this paper, we present the design of different beam shapers for high power CO2 lasers used in laser sintering, which are able to generate respectively square and circular top hat beam profiles. The size of the spot is controlled by using additional lenses to reduce or enlarge the beam size as necessary after the beam shaping optics. A spot size of 0.5 mm or 5 mm diameter can be achieved by switching between different lenses and adjust the distances accordingly. The designed beam shaping optics were subsequently fabricated in-house using ultra-precision diamond tooling in zinc sulfide material which is tolerant to high laser power and transparent at a wavelength of 10.6 μm. This beam shaping optics can form the basis for dynamic beam shaping in which the spot size, spot shape and/or intensity profile can be actively controlled by moving the optical components in the laser beam path.

[1]  Beam Shaping Optics for Process Acceleration , 2015 .

[2]  Hugo Thienpont,et al.  Enhanced performance of refractive laser beam shapers through additional phase control at focus , 2016 .

[3]  J. Glückstad,et al.  Gaussian to uniform intensity shaper based on generalized phase contrast. , 2008, Optics express.

[4]  Experimental demonstration of Generalized Phase Contrast based Gaussian beam-shaper. , 2011, Optics express.

[5]  Alexander Laskin,et al.  Beam shaping unit for micromachining , 2013, Optics & Photonics - Optical Engineering + Applications.

[6]  Fred M. Dickey,et al.  Gaussian laser beam profile shaping , 1996 .

[7]  B. Dong,et al.  Diffractive phase elements for beam shaping: a new design method. , 1995, Applied optics.

[8]  J. P. Campbell,et al.  Near Fields of Truncated-Gaussian Apertures* , 1969 .

[9]  D L Shealy,et al.  Refractive optical systems for irradiance redistribution of collimated radiation: their design and analysis. , 1980, Applied optics.

[10]  K. Aït-Ameur,et al.  Gaussian beam conversion using an axicon , 1999 .

[11]  C. M. Jefferson,et al.  Design and performance of a refractive optical system that converts a Gaussian to a flattop beam. , 2000, Applied optics.

[12]  T. Mitra,et al.  Gaussian-to-top-hat beam shaping: an overview of parameters, methods, and applications , 2012, LASE.

[13]  G. Y. Belay,et al.  Demonstration of a multichannel, multiresolution imaging system. , 2013, Applied optics.

[14]  Y. P. Lee,et al.  Transformation of gaussian to coherent uniform beams by inverse-gaussian transmittive filters. , 1998, Applied optics.

[15]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[16]  D. Shealy,et al.  Geometric optics-based design of laser beam shapers , 2003 .

[17]  Mali Gong,et al.  Beam shaping system design using double freeform optical surfaces. , 2013, Optics express.

[18]  Young-Jin Kim,et al.  Lasers in additive manufacturing: A review , 2017 .

[19]  David L. Shealy,et al.  Optical design of laser beam shaping systems , 2002, International Optical Design Conference.