论文信息 - Numerical analysis of asymmetric rolling accounting for differences in friction

Numerical analysis of asymmetric rolling accounting for differences in friction

Abstract Asymmetric rolling is relevant to a number of situations of practical interest. Here, asymmetric plate rolling due to different interface friction conditions at the two rolls is analysed numerically. The variation of the normal and frictional contact stresses at the interface between the plate and the upper and lower roll is presented. The differences in contact stress variation result in curling of the plate, here illustrated by a curled plate mesh.

Ann Bettina Richelsen | A. B. Richelsen

[1] M. I. Ghobrial,et al. A photoelastic investigation on the contact stresses developed in rolls during asymmetrical flat rolling , 1989 .

[2] Rajiv Shivpuri,et al. Finite element investigation of curling in non-symmetric rolling of flat stock , 1988 .

[3] W. Johnson,et al. Further experiments in asymmetrical rolling , 1966 .

[4] D. H. Sansome,et al. An experimental study of the effect of roll-speed mismatch on the rolling load during the cold rolling of thin strip , 1982 .

[5] P. Dewhurst,et al. A slipline field analysis of asymmetrical hot rolling , 1975 .

[6] W. Johnson,et al. A theoretical and experimental investigation into asymmetrical hot rolling , 1974 .

[7] Ann Bettina Richelsen. Interface element modelling of friction in rolling , 1994 .

[8] Ann Bettina Richelsen,et al. Viscoplastic analysis of plane-strain rolling using different friction models , 1991 .

[9] Janusz Pośpiech. A note on the influence of some factors affecting curvature in the flat rolling of strip , 1987 .