Microstructural and tribological studies of as-sprayed and heat-treated HVOF Cr3C2-CoNiCrAlY coatings with a CoNiCrAlY bond coat

[1]  Š. Houdková,et al.  Experimental study of indentation fracture toughness in HVOF sprayed hardmetal coatings , 2013 .

[2]  B. James,et al.  High temperature erosion–oxidation of Cr3C2–NiCr thermal spray coatings under simulated turbine conditions , 2013 .

[3]  H. S. Sidhu,et al.  High temperature hot corrosion behaviour of NiCr and Cr3C2–NiCr coatings on T91 boiler steel in an aggressive environment at 750 °C , 2012 .

[4]  S. Saeidi.  Microstructure, oxidation & mechanical properties of as-sprayed and annealed HVOF & VPS CoNiCrAIY coatings , 2011 .

[5]  Y. Birol.  High-temperature abrasive wear testing of potential tool materials for thixoforming of steels , 2010 .

[6]  B. Jodoin,et al.  Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying , 2010 .

[7]  B. James,et al.  The Effect of Heat Treatment on the Oxidation Mechanism of Blended Powder Cr3C2-NiCr Coatings , 2009, International Thermal Spray Conference.

[8]  D. G. McCartney,et al.  The Effect of Heat Treatment on the Oxidation Behavior of HVOF and VPS CoNiCrAlY Coatings , 2009 .

[9]  B. James,et al.  The role of microstructure in the mechanism of high velocity erosion of Cr3C2-Nicr thermal spray coatings: Part 1 -As-sprayed coatings , 2009 .

[10]  B. James,et al.  Erosion of oxide scales formed on Cr3C2-NiCr thermal spray coatings , 2008 .

[11]  S. Praveen Kumar,et al.  Hot corrosion behavior of detonation gun sprayed Cr3C2-NiCr coatings on Ni and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 °C , 2008 .

[12]  G. Matthäus,et al.  HVOF coatings as an alternative to hard chrome for pistons and valves , 2006 .

[13]  G. Gibbons,et al.  Down-selection and optimization of thermal-sprayed coatings for aluminum mould tool protection and upgrade , 2006 .

[14]  C. Kunioshi,et al.  High temperature oxidation and erosion–oxidation behaviour of HVOF sprayed Ni–20Cr, WC–20Cr–7Ni and Cr3C2–Ni–20Cr coatings , 2006 .

[15]  Anne Neville,et al.  Corrosion and synergy in a WCCoCr HVOF thermal spray coating—understanding their role in erosion–corrosion degradation , 2005 .

[16]  B. James,et al.  Long-term carbide development in high-velocity oxygen fuel/high-velocity air fuel Cr3C2-NiCr coatings heat treated at 900 °C , 2004 .

[17]  J. Schoenung,et al.  Effects of surface oxidation during HVOF processing on the primary stage oxidation of a CoNiCrAlY coating , 2004 .

[18]  J. Schoenung,et al.  Influence of Cryomilling on the Morphology and Composition of the Oxide Scales Formed on HVOF CoNiCrAlY Coatings , 2004 .

[19]  A. M. Limarga,et al.  Modeling of residual stresses in a plasma-sprayed zirconia/alumina functionally graded-thermal barrier coating , 2003 .

[20]  F. L. Bastian,et al.  Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder , 2002 .

[21]  Justin C. Sanchez,et al.  Role of heat treatments in the improvement of the sliding wear properties of Cr3C2–NiCr coatings , 2002 .

[22]  Shantanu Roy,et al.  Environmental Degradation of Metals: Corrosion Technology Series/14 , 2001 .

[23]  S. Roy,et al.  Environmental Degradation of Metals , 2001 .

[24]  F. Otsubo,et al.  Properties of Cr3C2-NiCr cermet coating sprayed by high power plasma and high velocity oxy-fuel processes , 2000 .

[25]  Yong Sun,et al.  The role of oxidation in the wear of plasma nitrided and PVD TiN coated steel , 1993 .