论文信息 - Eddy current modeling of silicon steel for use on SPICE

Eddy current modeling of silicon steel for use on SPICE

The relation between the equivalent eddy current field He and the instantaneous flux density rate dB/dt is experimentally obtained for current transformers made of silicon steel. The results show that He is proportional to (dB/dt)/sup 0.6-0.7/ in the operating frequency range (/spl sim/100 Hz) of the current transformers. The ac B-H loop calculated by combining the proposed eddy current model with the Jiles-Atherton model agrees well with the measured data. In addition, this combined model allows magnetic component characteristics using SPICE to be simulated. The simulated secondary voltage waveforms of current transformers are in satisfactory agreement with the measured values.

T. Fujiwara | R. Tahara

[1] Leon O. Chua,et al. Lumped-circuit models for nonlinear inductors exhibiting hysteresis loops , 1970 .

[2] Y. Sakaki. An approach estimating the number of domain walls and eddy current losses in grain-oriented 3% Si-Fe tape wound cores , 1980 .

[3] M. L. Hodgdon,et al. Mathematical theory and calculations of magnetic hysteresis curves , 1988 .

[5] G. Bertotti. Generalized Preisach model for the description of hysteresis and eddy current effects in metallic ferromagnetic materials , 1991 .

[6] F. Fiorillo,et al. An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform , 1990 .

[7] D. Jiles. Frequency dependence of hysteresis curves in 'non-conducting' magnetic materials , 1993 .

[8] G. Bertotti,et al. Physical interpretation of eddy current losses in ferromagnetic materials. I. Theoretical considerations , 1985 .

[9] W. W. L. Keerthipala,et al. Improved simulation models for current and voltage transformers in relay studies , 1992 .

[10] Louie J. Powell,et al. Current Transformer Burden and Saturation , 1979, IEEE Transactions on Industry Applications.

[11] D. Jiles,et al. Theory of ferromagnetic hysteresis , 1986 .