Fabrication of concave micro lens array using laser patterning and isotropic etching

Micro lens arrays are widely used in optical communication and laser-fiber coupling applications. In this paper, a technique to fabricate concave micro lens arrays on glass substrate using a third harmonic Nd:YAG laser direct patterning and followed by chemical wet isotropic etching is presented. The patterning process was done on gold film, which was coated on a glass substrate by using a NC controlled laser ablation tool paths. The glass substrate is then etched by using hydrofluoric acid (HF) solutions whereby the exposed area will be dissolved away by chemical reaction with HF. The type of etching process is an isotropic etching which the etching rate is equal at all direction thus produce hemispherical concave profile on glass. The optimum laser patterning parameters is obtained and the effect of different types of HF solutions on etching efficiency is studied. The surface morphology, 2D and 3D profiles are also measured. Various micro lens diameters are fabricated with different values of lens sag.