Abstract: The National Conference of Standard Laboratories International (NCSLI) started its 9th Josephson Voltage Standard (JVS) Interlaboratory Comparison (ILC) in March 2011. Sandia National Laboratories (SNL) is the pivot laboratory for this comparison of JVS systems that are currently in operation at several U.S. companies and national laboratories. In order to ensure the uniformity and traceability of the representation of the volt based on the Josephson constant (1990) in all the participating laboratories, the National Institute of Standards and Technology (NIST) DC Volt Laboratory and SNL performed a direct JVS comparison from December 6, 2010 to December 10, 2010 at SNL, Albuquerque, NM. In this JVS comparison, the difference between the NIST Compact JVS (CJVS) and the SNL JVS was found to be −2.08 nV ± 2.88 nV at 10 V (k = 2). The large number of measurement data points enabled research investigations, such as the evaluation of the impact of the null detector's gain error and the filter network on the comparison result. The team discovered that the polarization of the dielectric material of the SNL cryoprobe filter capacitors could affect the comparison outcome. The difference between the two JVSs was reduced from −6.50 nV to −2.08 nV by extending the waiting period for the capacitor recovery from polarization to equilibrium. An in-situ JVS comparison between the NIST CJVS and the SNL JVS via a set of Zener transfer standards at 10 V was also carried out. The difference was 12 nV ± 21 nV at 10 V (k = 2). This result is consistent with the results from similar past JVS ILC comparisons. The same set of Zeners will be used in the JVS ILC that is scheduled to begin in March 2011. The result of this direct JVS comparison achieved an uncertainty level comparable to the international key comparison BIPM.EM.K10.b in the Bureau International des Poids et Mesures (BIPM) Key Comparison Data Base (KCDB). This bilateral JVS comparison has confirmed that SNL is capable of performing its role as the pivot laboratory in the upcoming NCSLI JVS ILC. The results of the NCSLI JVS ILC will allow its participants to establish a voltage measurement link to NIST via the pivot laboratory SNL.
[1]
Thomas J. Witt,et al.
Using the Allan variance and power spectral density to characterize dc nanovoltmeters
,
2000,
Conference on Precision Electromagnetic Measurements. Conference Digest. CPEM 2000 (Cat. No.00CH37031).
[2]
Yi-Hua Tang,et al.
An evaluation of two methods for comparing Josephson voltage standards of two laboratories
,
2005,
IEEE Transactions on Instrumentation and Measurement.
[3]
D. Reymann,et al.
Comparison of the Josephson Voltage Standards
,
2006
.
[4]
Stéphane Solve,et al.
Limits to the Accuracy of 10-V Josephson Standards Revealed by BIPM On-Site Comparisons
,
2007,
IEEE Transactions on Instrumentation and Measurement.
[5]
Barry M. Wood,et al.
The Seventh Intercomparison of Josephson Voltage Standards in North America
,
2007,
IEEE Transactions on Instrumentation and Measurement.
[6]
T. J. Witt.
Practical methods for treating serial correlations in experimental observations
,
2009
.
[7]
Yi-hua Tang,et al.
Comparison of the INMETRO and NIST Josephson Voltage Standards (part of the ongoing regional key comparison SIM.EM.BIPM-K10.b.1)
,
2010
.
[8]
Yi-Hua Tang.
Automation of Direct Josephson Voltage Standard Comparison and an Application
,
2011,
IEEE Transactions on Instrumentation and Measurement.