Polarization-Induced Hole Doping in Wide–Band-Gap Uniaxial Semiconductor Heterostructures

Activating Stubborn Dopants Many applications of semiconductor light-emitting diodes and lasers, such as reading optical disks, benefit from shorter wavelengths, but this requires materials with larger energy gaps between their valance and conduction bands. The electronic conductivity of these materials often has to be increased by doping with impurity atoms. However, in nitride materials, such as GaN and AlGaN, hole doping with acceptor atoms such as Mg is ineffective at room temperature. Simon et al. (p. 60) grew a gradient of AlGaN on the surface of GaN and found that the polarization of the layer could field-ionize the acceptor dopants efficiently at room temperature. The heterostructure was used successfully in a light-emitting diode that emits in the ultraviolet. A compositional gradient of two semiconductors creates an electronic polarization that ionizes and activates dopant atoms. Impurity-based p-type doping in wide–band-gap semiconductors is inefficient at room temperature for applications such as lasers because the positive-charge carriers (holes) have a large thermal activation energy. We demonstrate high-efficiency p-type doping by ionizing acceptor dopants using the built-in electronic polarization in bulk uniaxial semiconductor crystals. Because the mobile hole gases are field-ionized, they are robust to thermal freezeout effects and lead to major improvements in p-type electrical conductivity. The new doping technique results in improved optical emission efficiency in prototype ultraviolet light-emitting–diode structures. Polarization-induced doping provides an attractive solution to both p- and n-type doping problems in wide–band-gap semiconductors and offers an unconventional path for the development of solid-state deep-ultraviolet optoelectronic devices and wide–band-gap bipolar electronic devices of the future.