Toward nanoscale three-dimensional printing: nanowalls built of electrospun nanofibers.

Although the extreme miniaturization of components in integrated circuits and biochemical chips has driven the development of various nanofabrication technologies, the 3D fabrication of nanoscale objects is still in its infancy. Here we propose a novel method to fabricate a free-standing nanowall by the precise, repetitive deposition of electrospun polymer nanofibers. We show that the electrified nanojet, which tends to become unstable when traveling in air because of coulombic repulsion, can be stably focused onto the microline of a metal electrode. On the conducting line, the polymer nanojet is spontaneously stacked successively to form a wall-like structure. We rationalize the length of the wall by balancing the tension in the polymer fiber with the electrostatic interaction of the fiber with the metal ground. We also show that the length of a nanowall can be controlled by translating the substrate. This novel 3D printing scheme can be applied to the development of various 3D nanoscale objects including bioscaffolds, nanofilters, nanorobots, and nanoelectrodes.

[1]  M. Brenner,et al.  Experimental characterization of electrospinning: the electrically forced jet and instabilities , 2001 .

[2]  J. M. Cowley.  Principles of Image Formation , 1986 .

[3]  James J. Feng.  The stretching of an electrified non-Newtonian jet: A model for electrospinning , 2002 .

[4]  Eben Alsberg,et al.  Three-dimensional electrospun alginate nanofiber mats via tailored charge repulsions. , 2012, Small.

[5]  Jiang Chang,et al.  Electrospinning of three-dimensional nanofibrous tubes with controllable architectures. , 2008, Nano letters.

[6]  E Stride,et al.  Electrospinning versus fibre production methods: from specifics to technological convergence. , 2012, Chemical Society reviews.

[7]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[8]  Darrell H. Reneker,et al.  Bending instability of electrically charged liquid jets of polymer solutions in electrospinning , 2000 .

[9]  Yong-Young Noh,et al.  Large-scale organic nanowire lithography and electronics , 2013, Nature Communications.

[10]  J. Lewis,et al.  Microperiodic structures: Direct writing of three-dimensional webs , 2004, Nature.

[11]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[12]  Grupo de Mec.  On the theory of electrohydrodynamically driven capillary jets , 1997 .

[13]  Seema M. Jadhav,et al.  Dip Pen Nanolithography , 2012 .

[14]  E. H. Lockwood,et al.  A Book of Curves , 1963, The Mathematical Gazette.

[15]  Darrell H. Reneker,et al.  Electrospinning jets and polymer nanofibers , 2008 .

[16]  Younan Xia,et al.  Electrospinning of polymeric and ceramic nanofibers as uniaxially aligned arrays , 2003 .

[17]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[18]  Dietmar W Hutmacher,et al.  Direct Writing By Way of Melt Electrospinning , 2011, Advanced materials.

[19]  L Mahadevan,et al.  Nanopottery: coiling of electrospun polymer nanofibers. , 2010, Nano letters.

[20]  J. Schwartz,et al.  Quadrupole ion trap mass spectrometry. , 1996, Methods in enzymology.

[21]  Liwei Lin,et al.  Near-field electrospinning. , 2006, Nano letters.

[22]  Younan Xia,et al.  Collecting electrospun nanofibers with patterned electrodes. , 2005, Nano letters.