Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites

Novel epoxidized hemp oil-based biocomposites containing jute fibre reinforcement were produced at the Centre of Excellence in Engineered Fibre Composites (CEEFC) owing to the need to develop new types of biobased materials. Mechanical properties (tensile, flexural, Charpy impact and interlaminar shear), thermo-mechanical properties (glass transition temperature, storage modulus and crosslink density) and moisture-absorption properties (saturation moisture level and diffusion coefficient) were investigated and compared with samples containing commercially produced epoxidized soybean oil and a synthetic bisphenol A diglycidyl ether-based epoxy control, R246TX cured with a blend of triethylenetetramine and isophorone diamine. Scanning electron microscopy was also performed to investigate the fibre–matrix interface. Epoxidized hemp oil-based samples were found to have marginally superior mechanical, dynamic mechanical and similar water-absorption properties in comparison to samples made with epoxidized soybean oil bioresin; however, both sample types were limited to bioresin concentrations below 30%. Synthetic epoxy-based samples exhibited the highest mechanical, dynamic mechanical and lowest water-absorption properties of all investigated samples. This study has also determined that epoxidized hemp oil-based bioresins when applied to jute fibre-reinforced biocomposites can compete with commercially produced epoxidized soybean oil in biocomposite applications.

[1]  Manjusri Misra,et al.  Thermo-Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 2† , 2004 .

[2]  M. Misra,et al.  Fracture toughness and impact strength of anhydride‐cured biobased epoxy , 2005 .

[3]  P. Czub.  Application of Modified Natural Oils as Reactive Diluents for Epoxy Resins , 2006 .

[4]  J. Jog,et al.  Natural fiber polymer composites: A review , 1999 .

[5]  K. Chandrashekharaa,et al.  Affordable composites using renewable materials , 2005 .

[6]  T. Aravinthan,et al.  Cure kinetics of an epoxidized hemp oil based bioresin system , 2011 .

[7]  V. Goud,et al.  Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids. , 2008, Bioresource technology.

[8]  R. Wool,et al.  Mechanical properties of glass/flax hybrid composites based on a novel modified soybean oil matrix material , 2005 .

[9]  T. Schuman,et al.  Vegetable Oil-derived Epoxy Monomers and Polymer Blends: A Comparative Study with Review , 2013 .

[10]  Soo-Jin Park,et al.  Synthesis and Thermal Properties of Epoxidized Vegetable Oil , 2004 .

[11]  Z. Ishak,et al.  Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites , 2009 .

[12]  R. Wool,et al.  Soybean‐ and castor‐oil‐based thermosetting polymers: Mechanical properties , 2006 .

[13]  Richard P. Wool,et al.  Development of a bio‐based composite material from soybean oil and keratin fibers , 2005 .

[14]  A. Kumar,et al.  Effect of NH2-MWCNTs on crosslink density of epoxy matrix and ILSS properties of e-glass/epoxy composites , 2013 .

[15]  R. Wool,et al.  Bio-based composite roof structure: Manufacturing and processing issues , 2006 .

[16]  M. Shibata,et al.  Biocomposites composed of epoxidized soybean oil cured with terpene-based acid anhydride and cellulose fibers , 2008 .

[17]  Richa Agrawal,et al.  Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites , 2000 .

[18]  M. T. Benaniba,et al.  Effects of epoxidized sunflower oil on the mechanical and dynamical analysis of the plasticized poly(vinyl chloride) , 2008 .

[19]  Richard P. Wool,et al.  Development and application of triglyceride‐based polymers and composites , 2001 .

[20]  Sabu Thomas,et al.  Dynamical mechanical analysis of sisal/oil palm hybrid fiber‐reinforced natural rubber composites , 2006 .

[21]  Soojin Park,et al.  Thermomechanical behavior of epoxy resins modified with epoxidized vegetable oils , 2008 .

[22]  Zoran S. Petrović,et al.  Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids — kinetics and side reactions , 2002 .

[23]  Maya Jacob John,et al.  Biofibres and Biocomposites , 2008 .

[24]  M. Skrifvars,et al.  Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fiber composites , 2010 .

[25]  Richard P. Wool,et al.  Natural fiber composites with plant oil-based resin , 2004 .

[26]  W. Chow,et al.  Thermal properties, curing characteristics and water absorption of soybean oil-based thermoset , 2011 .

[27]  R. Wool,et al.  Soybean and castor oil based monomers: Synthesis and copolymerization with styrene , 2006 .

[28]  K. Chandrashekhara,et al.  Synthesis and Characterization of Soy-based Nanocomposites , 2007 .

[29]  K. Chandrashekhara,et al.  Curing and mechanical characterization of a soy‐based epoxy resin system , 2004 .

[30]  Eduardo Mendizábal,et al.  Mechanical properties of acrylate-grafted henequen cellulose fibers and their application in composites , 1999 .

[31]  Richard P. Wool,et al.  Bio-based polymers and composites , 2005 .

[32]  M. Skrifvars,et al.  Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural‐fiber reinforcement , 2010 .

[33]  V. Goud,et al.  Epoxidation of karanja (Pongamia glabra) oil catalysed by acidic ion exchange resin , 2007 .

[34]  S. Joshi,et al.  Are natural fiber composites environmentally superior to glass fiber reinforced composites , 2004 .

[35]  V. Goud,et al.  Kinetics of in situ Epoxidation of Natural Unsaturated Triglycerides Catalyzed by Acidic Ion Exchange Resin , 2007 .

[36]  Manjusri Misra,et al.  Thermo‐Physical and Impact Properties of Epoxy Containing Epoxidized Linseed Oil, 1 , 2004 .

[37]  W. Chow,et al.  Thermal Properties, Fracture Toughness and Water Absorption of Epoxy-Palm Oil Blends , 2010 .